[lkml]   [2003]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.6.0-test5-mm2
Marek Habersack <> wrote:
> Hello,
> There's a problem with both 2.6.0-test5-{mm1,mm2} on my MaxData M1000T
> notebook. Details are in the attached dmesg output - in a word, via-rhine
> times out on the transfer rendering the network inaccessible:
> NETDEV WATCHDOG: eth0: transmit timed out
> eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
> NETDEV WATCHDOG: eth0: transmit timed out
> eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
> and USB HCD reports an unhandled IRQ and throws a call trace:
> drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver
> v2.1
> uhci-hcd 0000:00:11.2: UHCI Host Controller
> irq 9: nobody cared!
> Call Trace:
> [<c010c71a>] __report_bad_irq+0x2a/0x90
> [<c010c810>] note_interrupt+0x70/0xa0
> [<c010caa0>] do_IRQ+0x120/0x130
> [<c0432800>] common_interrupt+0x18/0x20
> [<c0121f00>] do_softirq+0x40/0xa0
> [<c010ca7c>] do_IRQ+0xfc/0x130
> [<c0432800>] common_interrupt+0x18/0x20
> [<c0267b91>] pci_bus_write_config_word+0x61/0x90
> [<c03326cf>] uhci_reset+0x3f/0x60
> [<c0324ff5>] usb_hcd_pci_probe+0x195/0x4a0
> [<c026b952>] pci_device_probe_static+0x52/0x70
> [<c026b9ab>] __pci_device_probe+0x3b/0x50
> [<c026b9ec>] pci_device_probe+0x2c/0x50
> [<c02afc2f>] bus_match+0x3f/0x70
> [<c02afd7f>] driver_attach+0x6f/0xa0
> [<c02b001d>] bus_add_driver+0x8d/0xa0
> [<c02b045f>] driver_register+0x2f/0x40
> [<c026bbdf>] pci_register_driver+0x5f/0x90
> [<c0545684>] uhci_hcd_init+0xc4/0x140
> [<c053270b>] do_initcalls+0x2b/0xa0
> [<c012db3f>] init_workqueues+0xf/0x50
> [<c01070cd>] init+0x2d/0x160
> [<c01070a0>] init+0x0/0x160
> [<c0109089>] kernel_thread_helper+0x5/0xc
> handlers:
> [<c026eefb>] (acpi_irq+0x0/0x16)
> Disabling IRQ #9
> Vanilla test5 works fine.

Looks like ACPI broke. Here is the procedure for reporting
ACPI problems:

Please file a bug at
Category: Power Management
Componenet: ACPI

Please attach the output from dmidecide, available in /usr/sbin/, or

Please attach the output from acpidmp, available in /usr/sbin/, or in

Please attach /proc/interrupts and the dmesg output showing the failure,
if possible. Send to
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:48    [from the cache]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site