lkml.org 
[lkml]   [2003]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-usb-devel] 2.4.21 USB printer failure w/ HP PSC750
On Wed, 6 Aug 2003, Alan Stern wrote:

> On Wed, 6 Aug 2003, Peter Denison wrote:
>
> > kernel: 2: [d66d9060] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
> > EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
>
> This indicates more communications problems. Have you checked that your
> USB cable is okay? Did you go back to 2.4.20 to see if that still works?

Thanks for the detailed explanation. I am still trying to verify what
happens in 2.4.20. Unfortunately, in upgrading/installing the graphics
drivers to enable me to run 2.4.21, I am now unable to run X under 2.4.20.
I have a different graphics card on order.

Simple text printing (/etc/group, print size 1024 bytes) works under both
2.4.20 and 2.4.21, as does tiger.ps (print size ~31k), so I think it
unlikely that a cable problem is to blame, but I can't yet easily test a
large, complicated rendered graphic print on 2.4.20.

However, several reboots later, the original page is printing under
2.4.21, so I don't know now if there's a problem or not.

--
Peter Denison <peterd at marshadder dot uklinux dot net>
Please use this address only for personal mail, not copied to lists
gatewayed to news or web pages unless the addresses are removed.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.754 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site