lkml.org 
[lkml]   [2003]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: ACPI Error with 2.4.22-pre10 on ibm thinkpad
Date
Sorry for this ;-) it was 2.4.22-pre10 not 2.4.20-pre10, it was a long
night.


>
>
>
> hy,
>
> I try to use acpi on my new IBM thinkpad r40 but it won't work:
>
> Kernel: 2.4.22-pre10
>
> Config:
>
> CONFIG_APM=m
> CONFIG_APM_IGNORE_USER_SUSPEND=y
> # CONFIG_APM_DO_ENABLE is not set
> CONFIG_APM_CPU_IDLE=y
> CONFIG_APM_DISPLAY_BLANK=y
> # CONFIG_APM_RTC_IS_GMT is not set
> # CONFIG_APM_ALLOW_INTS is not set
> CONFIG_APM_REAL_MODE_POWER_OFF=y
>
> #
> # ACPI Support
> #
> CONFIG_ACPI=y
> # CONFIG_ACPI_HT_ONLY is not set
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_INTERPRETER=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_FAN=m
> CONFIG_ACPI_PROCESSOR=m
> CONFIG_ACPI_THERMAL=m
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_RELAXED_AML=y
>
>
> I got this errors:
>
>
> Linux version 2.4.22-pre10 (ruben@work) (gcc-Version 3.3.1 20030626 (Debian prerelease)) #1 Sam Aug 2 23:03:02 CEST 2003
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
> BIOS-e820: 000000001ff60000 - 000000001ff79000 (ACPI data)
> BIOS-e820: 000000001ff79000 - 000000001ff7b000 (ACPI NVS)
> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
> 511MB LOWMEM available.
> ACPI: have wakeup address 0xc0001000
> On node 0 totalpages: 130912
> zone(0): 4096 pages.
> zone(1): 126816 pages.
> zone(2): 0 pages.
> ACPI: RSDP (v002 IBM ) @ 0x000f6d40
> ACPI: XSDT (v001 IBM TP-1P 00000.04352) @ 0x1ff6f4f3
> ACPI: FADT (v003 IBM TP-1P 00000.04352) @ 0x1ff6f600
> ACPI: SSDT (v001 IBM TP-1P 00000.04352) @ 0x1ff6f7b4
> ACPI: ECDT (v001 IBM TP-1P 00000.04352) @ 0x1ff78e96
> ACPI: TCPA (v001 IBM TP-1P 00000.04352) @ 0x1ff78ee8
> ACPI: BOOT (v001 IBM TP-1P 00000.04352) @ 0x1ff78fd8
> ACPI: DSDT (v001 IBM TP-1P 00000.04352) @ 0x00000000
> ACPI: BIOS passes blacklist
> ACPI: MADT not present
> IBM machine detected. Enabling interrupts during APM calls.
> Kernel command line: BOOT_IMAGE=Linux ro root=302
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> Detected 1498.758 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 2988.44 BogoMIPS
> Memory: 514204k/523648k available (2185k kernel code, 9056k reserved, 773k data, 136k init, 0k highmem)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000
> CPU: Common caps: a7e9fbbf 00000000 00000000 00000000
> CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1498.7099 MHz.
> ..... host bus clock speed is 99.9140 MHz.
> cpu: 0, clocks: 999140, slice: 499570
> CPU0<T0:999136,T1:499552,D:14,S:499570,C:999140>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> ACPI: Subsystem revision 20030619
> PCI: PCI BIOS revision 2.10 entry at 0xfd936, last bus=5
> PCI: Using configuration type 1
> ACPI: Found ECDT
> schedule_task(): keventd has not started
> ACPI-0165: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it.
> ACPI-0168: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details.
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: System [ACPI] (supports S0 S3 S4 S5)
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11, disabled)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11, disabled)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11)
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
> Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Embedded Controller [EC] (gpe 28)
> schedule_task(): keventd has not started
> ACPI: Power Resource [PUBS] (on)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> PCI: Probing PCI hardware
> ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
> ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
> PCI: Using ACPI for IRQ routing
> PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
> Starting kswapd
> Journalled Block Device driver loaded
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
> kmod: failed to exec /sbin/modprobe -s -k parport_lowlevel, errno = 2
> lp: driver loaded but no devices found
> Real Time Clock Driver v1.10e
> Non-volatile memory driver v1.2
> i810_rng: RNG not detected
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> loop: loaded (max 8 devices)
> Intel(R) PRO/100 Network Driver - version 2.3.18-k1
> Copyright (c) 2003 Intel Corporation
>
> e100: selftest OK.
> e100: eth0: Intel(R) PRO/100 Network Connection
> Hardware receive checksums enabled
>
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: Detected Intel(R) 855PM chipset
> agpgart: AGP aperture is 256M @ 0xd0000000
> [drm] AGP 0.99 on Unknown @ 0xd0000000 256MB
> [drm] Initialized radeon 1.1.1 20010405 on minor 0
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH4: IDE controller at PCI slot 00:1f.1
> PCI: Enabling device 00:1f.1 (0005 -> 0007)
> ICH4: chipset revision 1
> ICH4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
> hda: HITACHI_DK23EA-60B, ATA DISK drive
> blk: queue c0434aa0, I/O limit 4095Mb (mask 0xffffffff)
> hdc: MATSHITADVD-RAM UJ-810, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: attached ide-disk driver.
> hda: host protected area => 1
> hda: 117210240 sectors (60012 MB) w/2048KiB Cache, CHS=7752/240/63, UDMA(100)
> hdc: attached ide-cdrom driver.
> hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> Partition check:
> hda: hda1 hda2 hda3 hda4 < hda5 >
> SCSI subsystem driver Revision: 1.00
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Intel 810 + AC97 Audio, version 0.24, 23:08:14 Aug 2 2003
> PCI: Setting latency timer of device 00:1f.5 to 64
> i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800, IRQ 5
> i810: Intel ICH4 mmio at 0xe0868c00 and 0xe086a800
> i810_audio: Primary codec has ID 0
> i810_audio: Audio Controller supports 6 channels.
> i810_audio: Defaulting to base 2 channel mode.
> i810_audio: Resetting connection 0
> i810_audio: Connection 0 with codec id 0
> ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
> i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> PCI: Setting latency timer of device 00:1d.7 to 64
> ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
> ehci_hcd 00:1d.7: irq 9, pci mem e086c000
> usb.c: new USB bus registered, assigned bus number 1
> ehci_hcd 00:1d.7: enabled 64bit PCI DMA
> PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
> PCI: 00:1d.7 PCI cache line size corrected to 32.
> ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
> hub.c: USB hub found
> hub.c: 6 ports detected
> host/uhci.c: USB Universal Host Controller Interface driver v1.1
> PCI: Setting latency timer of device 00:1d.0 to 64
> host/uhci.c: USB UHCI at I/O 0x1800, IRQ 9
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Setting latency timer of device 00:1d.1 to 64
> host/uhci.c: USB UHCI at I/O 0x1820, IRQ 11
> usb.c: new USB bus registered, assigned bus number 3
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Setting latency timer of device 00:1d.2 to 64
> host/uhci.c: USB UHCI at I/O 0x1840, IRQ 10
> usb.c: new USB bus registered, assigned bus number 4
> hub.c: USB hub found
> hub.c: 2 ports detected
> I2O Core - (C) Copyright 1999 Red Hat Software
> I2O: Event thread created as pid 14
> Linux I2O PCI support (c) 1999 Red Hat Software.
> i2o: Checking for PCI I2O controllers...
> I2O configuration manager v 0.04.
> (C) Copyright 1999 Red Hat Software
> I2O Block Storage OSM v0.9
> (c) Copyright 1999-2001 Red Hat Software.
> i2o_block: Checking for Boot device...
> i2o_block: Checking for I2O Block devices...
> I2O LAN OSM (C) 1999 University of Helsinki.
> i2o_scsi.c: Version 0.0.1
> chain_pool: 0 bytes @ dfd24680
> (512 byte buffers X 4 can_queue X 0 i2o controllers)
> Initializing Cryptographic API
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> Linux IP multicast router 0.06 plus PIM-SM
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> NET4: Ethernet Bridge 008 for NET4.0
> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
> All bugs added by David S. Miller <davem@redhat.com>
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 136k freed
> Adding Swap: 1050836k swap-space (priority -1)
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
> usb.c: registered new driver usbkbd
> usbkbd.c: :USB HID Boot Protocol keyboard driver
> Linux Kernel Card Services 3.1.22
> options: [pci] [cardbus] [pm]
> Yenta IRQ list 0098, PCI irq11
> Socket status: 30000007
> cs: IO port probe 0x0c00-0x0cff: clean.
> cs: IO port probe 0x0800-0x08ff: clean.
> cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
> cs: IO port probe 0x0a00-0x0aff: clean.
> ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
> ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.AC__._PSR] (Node c15ba320), AE_TIME
> ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
> ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node c15bbec0), AE_TIME
> ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
> ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node c15ba220), AE_TIME
> ACPI: Power Button (FF) [PWRF]
> ACPI: Lid Switch [LID]
> ACPI: Sleep Button (CM) [SLPB]
> ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
> ACPI-1121: *** Error: Method execution failed [\_PR_.CPU_._PPC] (Node c158d960), AE_TIME
> ACPI: Processor [CPU] (supports C1 C2 C3, 6 performance states, 8 throttling states)
> ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
> ACPI-1121: *** Error: Method execution failed [\_TZ_.THM0._TMP] (Node c15b5920), AE_TIME
>
>
>
> After this I try patching 2.4.22-pre10 with the latest acpi patches result :
>
>
> -o vmlinux
> arch/i386/kernel/kernel.o(.text.init+0x3c44): In function `abit_apic_required':
>: undefined reference to `enable_apic_up'
> arch/i386/kernel/kernel.o(.text.init+0x3c82): In function `abit_apic_required':
>: undefined reference to `enable_apic_up'
> arch/i386/kernel/kernel.o(.text.init+0x3fc0): In function `force_apic':
>: undefined reference to `enable_apic_up'
> make: *** [vmlinux] Error 1
>
>
>
> The config was nearly the same.
>


--
Ruben Puettmann
ruben@puettmann.net
http://www.puettmann.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.047 / U:5.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site