[lkml]   [2003]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Badness in device_release at drivers/base/core.c:84
> Patrick,
> I enabled CONFIG_SCSI_LOGGING=y in kernel then i used
> scsi_mod.scsi_logging_level=0x140 and scsi_mod.max_scsi_luns=1 when
> booting the kernel from lilo.I can see some debug information scroll on
> the screen and i did see ID0 LUN0 get probed even the correct transfer
> rate for the SCSI disk is set.I forgot but isn't there a key sequence
> when pressed it will stop the screen output like pause/break key?

You might be able to get useful information without using a serial
console if you turn off your CDROM drives so they don't add extra output,
but your best bet is to use a serial console.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.200 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site