lkml.org 
[lkml]   [2003]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ERROR: Broken Via-Rhine NIC In "Stable" 2.4.22
I saw that same message in 2.6.0-t3. Sometimes immediately the netcard 
would not ping
and sometimes it would fail after a while.

Do you see an "irq ? disabled" message, too? That would be typical.

Try turning apic off in bios-cmos-setup and letting linux turn it on. I
don't have to use drastic
pci=noacpi, I can just disable serial and parallel and USB and turn apic
off in bios and run
with no cd drives. Easier for me.

-Bob

Rod Bacon wrote:

>Just attempted upgrade from 2.4.21 on a Via M10000 Mini-ITX system that
>was working perfectly. 2.4.22 results in eth0 not working, and constant
>"NETDEV WATCHDOG: eth0: transmit timed out. Resetting".
>
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:48    [W:0.029 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site