lkml.org 
[lkml]   [2003]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/4] Net device error logging, revised (tg3)
Here's a patch to modify the v2.6.0-test4 tg3 driver to use netdev_* macros.

Jim Keniston
IBM Linux Technology Centerdiff -Naur linux.org/drivers/net/tg3.c linux.tg3.patched/drivers/net/tg3.c
--- linux.org/drivers/net/tg3.c Mon Aug 25 13:29:39 2003
+++ linux.tg3.patched/drivers/net/tg3.c Mon Aug 25 13:29:39 2003
@@ -489,9 +489,8 @@
break;

default:
- printk(KERN_WARNING PFX "%s: Invalid power state (%d) "
- "requested.\n",
- tp->dev->name, state);
+ netdev_warn(tp->dev,, "Invalid power state (%d) "
+ "requested.\n", state);
return -EINVAL;
};

@@ -639,10 +638,10 @@
static void tg3_link_report(struct tg3 *tp)
{
if (!netif_carrier_ok(tp->dev)) {
- printk(KERN_INFO PFX "%s: Link is down.\n", tp->dev->name);
+ netdev_info(tp->dev, LINK, "Link is down.\n");
} else {
- printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
- tp->dev->name,
+ netdev_info(tp->dev, LINK,
+ "Link is up at %d Mbps, %s duplex.\n",
(tp->link_config.active_speed == SPEED_1000 ?
1000 :
(tp->link_config.active_speed == SPEED_100 ?
@@ -650,9 +649,8 @@
(tp->link_config.active_duplex == DUPLEX_FULL ?
"full" : "half"));

- printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
+ netdev_info(tp->dev, LINK, "Flow control is %s for TX and "
"%s for RX.\n",
- tp->dev->name,
(tp->tg3_flags & TG3_FLAG_TX_PAUSE) ? "on" : "off",
(tp->tg3_flags & TG3_FLAG_RX_PAUSE) ? "on" : "off");
}
@@ -2231,8 +2229,7 @@
{
struct tg3 *tp = dev->priv;

- printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- dev->name);
+ netdev_err(dev, TX_ERR, "transmit timed out, resetting\n");

schedule_work(&tp->reset_task);
}
@@ -2379,8 +2376,7 @@
if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&tp->tx_lock, flags);
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ netdev_err(dev, TX_ERR, "BUG! Tx Ring full when queue awake!\n");
return 1;
}

@@ -2397,7 +2393,8 @@
TXD_FLAG_CPU_POST_DMA);

if (times++ < 5) {
- printk("tg3_xmit: tso_size[%u] tso_segs[%u] len[%u]\n",
+ netdev_info(dev,,
+ "tg3_xmit: tso_size[%u] tso_segs[%u] len[%u]\n",
(unsigned int) skb_shinfo(skb)->tso_size,
(unsigned int) skb_shinfo(skb)->tso_segs,
skb->len);
@@ -2571,8 +2568,7 @@
if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&tp->tx_lock, flags);
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ netdev_err(dev, TX_ERR, "BUG! Tx Ring full when queue awake!\n");
return 1;
}

@@ -2593,7 +2589,8 @@
TXD_FLAG_CPU_POST_DMA);

if (times++ < 5) {
- printk("tg3_xmit: tso_size[%u] tso_segs[%u] len[%u]\n",
+ netdev_info(dev,,
+ "tg3_xmit: tso_size[%u] tso_segs[%u] len[%u]\n",
(unsigned int) skb_shinfo(skb)->tso_size,
(unsigned int) skb_shinfo(skb)->tso_segs,
skb->len);
@@ -3017,7 +3014,7 @@
}

if (i == MAX_WAIT_CNT) {
- printk(KERN_ERR PFX "tg3_stop_block timed out, "
+ netdev_err(tp->dev,, "tg3_stop_block timed out, "
"ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
return -ENODEV;
@@ -3070,9 +3067,9 @@
break;
}
if (i >= MAX_WAIT_CNT) {
- printk(KERN_ERR PFX "tg3_abort_hw timed out for %s, "
+ netdev_err(tp->dev,, "tg3_abort_hw timed out; "
"TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
- tp->dev->name, tr32(MAC_TX_MODE));
+ tr32(MAC_TX_MODE));
return -ENODEV;
}

@@ -3208,9 +3205,8 @@

if (i >= 100000 &&
!(tp->tg3_flags2 & TG3_FLG2_SUN_5704)) {
- printk(KERN_ERR PFX "tg3_halt timed out for %s, "
- "firmware will not restart magic=%08x\n",
- tp->dev->name, val);
+ netdev_err(tp->dev,, "tg3_halt timed out, "
+ "firmware will not restart magic=%08x\n", val);
return -ENODEV;
}

@@ -3384,9 +3380,7 @@
}

if (i >= 10000) {
- printk(KERN_ERR PFX "tg3_reset_cpu timed out for %s, "
- "and %s CPU\n",
- tp->dev->name,
+ netdev_err(tp->dev,, "tg3_reset_cpu timed out for %s CPU\n",
(offset == RX_CPU_BASE ? "RX" : "TX"));
return -ENODEV;
}
@@ -3498,9 +3492,9 @@
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_firmware fails for %s "
+ netdev_err(tp->dev,, "tg3_load_firmware fails "
"to set RX CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(RX_CPU_BASE + CPU_PC),
+ tr32(RX_CPU_BASE + CPU_PC),
TG3_FW_TEXT_ADDR);
return -ENODEV;
}
@@ -3826,9 +3820,9 @@
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_tso_firmware fails for %s "
+ netdev_err(tp->dev,, "tg3_load_tso_firmware fails "
"to set TX CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(TX_CPU_BASE + CPU_PC),
+ tr32(TX_CPU_BASE + CPU_PC),
TG3_TSO_FW_TEXT_ADDR);
return -ENODEV;
}
@@ -3953,9 +3947,8 @@
}
if (i >= 100000 &&
!(tp->tg3_flags2 & TG3_FLG2_SUN_5704)) {
- printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, "
- "firmware will not restart magic=%08x\n",
- tp->dev->name, val);
+ netdev_err(tp->dev,, "tg3_reset_hw timed out, "
+ "firmware will not restart magic=%08x\n", val);
return -ENODEV;
}

@@ -4060,8 +4053,7 @@
udelay(10);
}
if (i >= 2000) {
- printk(KERN_ERR PFX "tg3_reset_hw cannot enable BUFMGR for %s.\n",
- tp->dev->name);
+ netdev_err(tp->dev,, "tg3_reset_hw cannot enable BUFMGR.\n");
return -ENODEV;
}

@@ -4073,8 +4065,7 @@
udelay(10);
}
if (i >= 2000) {
- printk(KERN_ERR PFX "tg3_reset_hw cannot reset FTQ for %s.\n",
- tp->dev->name);
+ netdev_err(tp->dev,, "tg3_reset_hw cannot reset FTQ.\n");
return -ENODEV;
}

@@ -5222,14 +5213,12 @@

static u32 tg3_get_msglevel(struct net_device *dev)
{
- struct tg3 *tp = dev->priv;
- return tp->msg_enable;
+ return dev->msg_enable;
}

static void tg3_set_msglevel(struct net_device *dev, u32 value)
{
- struct tg3 *tp = dev->priv;
- tp->msg_enable = value;
+ dev->msg_enable = value;
}

static int tg3_nway_reset(struct net_device *dev)
@@ -5550,7 +5539,7 @@
int i, saw_done_clear;

if (tp->tg3_flags2 & TG3_FLG2_SUN_5704) {
- printk(KERN_ERR PFX "Attempt to do nvram_read on Sun 5704\n");
+ netdev_err(tp->dev,, "Attempt to do nvram_read on Sun 5704\n");
return -EINVAL;
}

@@ -6049,7 +6038,7 @@
/* Force the chip into D0. */
err = tg3_set_power_state(tp, 0);
if (err) {
- printk(KERN_ERR PFX "(%s) transition to D0 failed\n",
+ netdev_err(tp->dev,, "(%s) transition to D0 failed\n",
pci_name(tp->pdev));
return err;
}
@@ -6160,7 +6149,8 @@

err = tg3_phy_probe(tp);
if (err) {
- printk(KERN_ERR PFX "(%s) phy probe failed, err %d\n",
+ netdev_err(tp->dev,,
+ "(%s) phy probe failed, err %d\n",
pci_name(tp->pdev), err);
/* ... but do not return immediately ... */
}
@@ -6643,20 +6633,21 @@
unsigned long tg3reg_base, tg3reg_len;
struct net_device *dev;
struct tg3 *tp;
- int i, err, pci_using_dac, pm_cap;
+ int err, pci_using_dac, pm_cap;
+ unsigned char *mac;

if (tg3_version_printed++ == 0)
printk(KERN_INFO "%s", version);

err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device, "
+ dev_err(&pdev->dev, "Cannot enable PCI device, "
"aborting.\n");
return err;
}

if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX "Cannot find proper PCI device "
+ dev_err(&pdev->dev, "Cannot find proper PCI device "
"base address, aborting.\n");
err = -ENODEV;
goto err_out_disable_pdev;
@@ -6664,7 +6655,7 @@

err = pci_request_regions(pdev, DRV_MODULE_NAME);
if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources, "
+ dev_err(&pdev->dev, "Cannot obtain PCI resources, "
"aborting.\n");
goto err_out_disable_pdev;
}
@@ -6674,7 +6665,7 @@
/* Find power-management capability. */
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
+ dev_err(&pdev->dev, "Cannot find PowerManagement capability, "
"aborting.\n");
goto err_out_free_res;
}
@@ -6683,14 +6674,14 @@
if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
pci_using_dac = 1;
if (pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL)) {
- printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
+ dev_err(&pdev->dev, "Unable to obtain 64 bit DMA "
"for consistent allocations\n");
goto err_out_free_res;
}
} else {
err = pci_set_dma_mask(pdev, (u64) 0xffffffff);
if (err) {
- printk(KERN_ERR PFX "No usable DMA configuration, "
+ dev_err(&pdev->dev, "No usable DMA configuration, "
"aborting.\n");
goto err_out_free_res;
}
@@ -6702,7 +6693,7 @@

dev = alloc_etherdev(sizeof(*tp));
if (!dev) {
- printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
+ dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n");
err = -ENOMEM;
goto err_out_free_res;
}
@@ -6727,9 +6718,9 @@
tp->tx_mode = TG3_DEF_TX_MODE;
tp->mi_mode = MAC_MI_MODE_BASE;
if (tg3_debug > 0)
- tp->msg_enable = tg3_debug;
+ dev->msg_enable = tg3_debug;
else
- tp->msg_enable = TG3_DEF_MSG_ENABLE;
+ dev->msg_enable = TG3_DEF_MSG_ENABLE;

/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
@@ -6759,7 +6750,7 @@

tp->regs = (unsigned long) ioremap(tg3reg_base, tg3reg_len);
if (tp->regs == 0UL) {
- printk(KERN_ERR PFX "Cannot map device registers, "
+ netdev_err(dev,, "Cannot map device registers, "
"aborting.\n");
err = -ENOMEM;
goto err_out_free_dev;
@@ -6789,21 +6780,21 @@

err = tg3_get_invariants(tp);
if (err) {
- printk(KERN_ERR PFX "Problem fetching invariants of chip, "
+ netdev_err(dev,, "Problem fetching invariants of chip, "
"aborting.\n");
goto err_out_iounmap;
}

err = tg3_get_device_address(tp);
if (err) {
- printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
+ netdev_err(dev,, "Could not obtain valid ethernet address, "
"aborting.\n");
goto err_out_iounmap;
}

err = tg3_test_dma(tp);
if (err) {
- printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
+ netdev_err(dev,, "DMA engine test failed, aborting.\n");
goto err_out_iounmap;
}

@@ -6829,7 +6820,7 @@

err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "Cannot register net device, "
+ netdev_err(dev,, "Cannot register net device, "
"aborting.\n");
goto err_out_iounmap;
}
@@ -6842,8 +6833,9 @@
*/
pci_save_state(tp->pdev, tp->pci_cfg_state);

- printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (PCI%s:%s:%s) %sBaseT Ethernet ",
- dev->name,
+ mac = dev->dev_addr;
+ netdev_info(dev, PROBE, "Tigon3 [partno(%s) rev %04x PHY(%s)] (PCI%s:%s:%s) %sBaseT Ethernet "
+ "%02x:%02x:%02x:%02x:%02x:%02x\n",
tp->board_part_number,
tp->pci_chip_rev_id,
tg3_phy_string(tp),
@@ -6852,11 +6844,8 @@
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "133MHz" : "66MHz") :
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "100MHz" : "33MHz")),
((tp->tg3_flags & TG3_FLAG_PCI_32BIT) ? "32-bit" : "64-bit"),
- (tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100" : "10/100/1000");
-
- for (i = 0; i < 6; i++)
- printk("%2.2x%c", dev->dev_addr[i],
- i == 5 ? '\n' : ':');
+ (tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100" : "10/100/1000",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);

return 0;
\
 
 \ /
  Last update: 2005-03-22 13:48    [W:0.104 / U:4.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site