lkml.org 
[lkml]   [2003]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: [Fwd: Re: via rhine network failure on 2.6.0-test4]
Date
From
No. Just boot the system with a kernel that works, then run those
commands.

Thanks,
Jun
> -----Original Message-----
> From: Steve French [mailto:smfrench@austin.rr.com]
> Sent: Monday, August 25, 2003 8:37 AM
> To: linux-kernel@vger.kernel.org; Jeff Garzik; Nakajima, Jun
> Subject: [Fwd: Re: via rhine network failure on 2.6.0-test4]
>
> Do dmidecode and acpidump have to be run while booted to the
failing
> kernel (2.6.0-test4)? If so I will need to rebuild test4 with ACPI on
> again tonight to get it to fail. Otherwise here is the output from
> dmidecode run on the same system while booted to 2.4. I will open a
> bug on bugzilla later today if I can track down my bugzilla id.
>
> # dmidecode 2.2
> SMBIOS 2.2 present.
> 36 structures occupying 961 bytes.
> Table at 0x000F0800.
> Handle 0x0000
> DMI type 0, 19 bytes.
> BIOS Information
> Vendor: Award Software International, Inc.
> Version: 6.00 PG
> Release Date: 11/13/2001
> Address: 0xE0000
> Runtime Size: 128 kB
> ROM Size: 256 kB
> Characteristics:
> ISA is supported
> PCI is supported
> PNP is supported
> APM is supported
> BIOS is upgradeable
> BIOS shadowing is allowed
> ESCD support is available
> Boot from CD is supported
> Selectable boot is supported
> BIOS ROM is socketed
> EDD is supported
> 5.25"/360 KB floppy services are supported (int 13h)
> 5.25"/1.2 MB floppy services are supported (int 13h)
> 3.5"/720 KB floppy services are supported (int 13h)
> 3.5"/2.88 MB floppy services are supported (int 13h)
> Print screen service is supported (int 5h)
> 8042 keyboard services are supported (int 9h)
> Serial services are supported (int 14h)
> Printer services are supported (int 17h)
> CGA/mono video services are supported (int 10h)
> ACPI is supported
> USB legacy is supported
> AGP is supported
> LS-120 boot is supported
> ATAPI Zip drive boot is supported
> Handle 0x0001
> DMI type 1, 25 bytes.
> System Information
> Manufacturer: VIA Technologies, Inc.
> Product Name: VT8366-8233
> Version:
> Serial Number:
> UUID: Not Present
> Wake-up Type: Power Switch
> Handle 0x0002
> DMI type 2, 8 bytes.
> Base Board Information
> Manufacturer:
> Product Name: VT8366-8233
> Version:
> Serial Number:
> Handle 0x0003
> DMI type 3, 13 bytes.
> Chassis Information
> Manufacturer:
> Type: Desktop
> Lock: Not Present
> Version:
> Serial Number:
> Asset Tag:
> Boot-up State: Unknown
> Power Supply State: Unknown
> Thermal State: Unknown
> Security Status: Unknown
> Handle 0x0004
> DMI type 4, 32 bytes.
> Processor Information
> Socket Designation: Socket A
> Type: Central Processor
> Family: Duron
> Manufacturer: AMD
> ID: 62 06 00 00 FF F9 83 03
> Signature: Type 0, Family 6, Model 6, Stepping 2
> Flags:
> FPU (Floating-point unit on-chip)
> VME (Virtual mode extension)
> DE (Debugging extension)
> PSE (Page size extension)
> TSC (Time stamp counter)
> MSR (Model specific registers)
> PAE (Physical address extension)
> MCE (Machine check exception)
> CX8 (CMPXCHG8 instruction supported)
> SEP (Fast system call)
> MTRR (Memory type range registers)
> PGE (Page global enable)
> MCA (Machine check architecture)
> CMOV (Conditional move instruction supported)
> PAT (Page attribute table)
> PSE-36 (36-bit page size extension)
> MMX (MMX technology supported)
> FXSR (Fast floating-point save and restore)
> SSE (Streaming SIMD extensions)
> Version: AMD Athlon(tm) XP
> Voltage: 3.3 V
> External Clock: 133 MHz
> Max Speed: 1500 MHz
> Current Speed: 1600 MHz
> Status: Populated, Enabled
> Upgrade: ZIF Socket
> L1 Cache Handle: 0x0009
> L2 Cache Handle: 0x000A
> L3 Cache Handle: No L3 Cache
> Handle 0x0005
> DMI type 5, 22 bytes.
> Memory Controller Information
> Error Detecting Method: None
> Error Correcting Capabilities:
> None
> Supported Interleave: One-way Interleave
> Current Interleave: Four-way Interleave
> Maximum Memory Module Size: 32 MB
> Maximum Total Memory Size: 96 MB
> Supported Speeds:
> 70 ns
> 60 ns
> Supported Memory Types:
> Standard
> EDO
> Memory Module Voltage: 5.0 V
> Associated Memory Slots: 3
> 0x0006
> 0x0007
> 0x0008
> Enabled Error Correcting Capabilities: None
> Handle 0x0006
> DMI type 6, 12 bytes.
> Memory Module Information
> Socket Designation: A0
> Bank Connections: 0 1
> Current Speed: 60 ns
> Type: Unknown
> Installed Size: 512 MB (Double-bank Connection)
> Enabled Size: 512 MB (Double-bank Connection)
> Error Status: OK
> Handle 0x0007
> DMI type 6, 12 bytes.
> Memory Module Information
> Socket Designation: A1
> Bank Connections: 2
> Current Speed: 60 ns
> Type: Unknown
> Installed Size: 512 MB (Single-bank Connection)
> Enabled Size: 512 MB (Single-bank Connection)
> Error Status: OK
> Handle 0x0008
> DMI type 6, 12 bytes.
> Memory Module Information
> Socket Designation: A2
> Bank Connections: None
> Current Speed: 60 ns
> Type: Unknown
> Installed Size: Not Installed (Single-bank Connection)
> Enabled Size: Not Installed (Single-bank Connection)
> Error Status: OK
> Handle 0x0009
> DMI type 7, 19 bytes.
> Cache Information
> Socket Designation: Internal Cache
> Configuration: Enabled, Not Socketed, Level 1
> Operational Mode: Write Back
> Location: Internal
> Installed Size: 128 KB
> Maximum Size: 128 KB
> Supported SRAM Types:
> Synchronous
> Installed SRAM Type: Synchronous
> Speed: Unknown
> Error Correction Type: Unknown
> System Type: Unknown
> Associativity: Unknown
> Handle 0x000A
> DMI type 7, 19 bytes.
> Cache Information
> Socket Designation: External Cache
> Configuration: Enabled, Not Socketed, Level 2
> Operational Mode: Write Back
> Location: External
> Installed Size: 256 KB
> Maximum Size: 256 KB
> Supported SRAM Types:
> Synchronous
> Installed SRAM Type: Synchronous
> Speed: Unknown
> Error Correction Type: Unknown
> System Type: Unknown
> Associativity: Unknown
> Handle 0x000B
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: PRIMARY IDE
> Internal Connector Type: On Board IDE
> External Reference Designator:
> External Connector Type: None
> Port Type: Other
> Handle 0x000C
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: SECONDARY IDE
> Internal Connector Type: On Board IDE
> External Reference Designator:
> External Connector Type: None
> Port Type: Other
> Handle 0x000D
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: FDD
> Internal Connector Type: On Board Floppy
> External Reference Designator:
> External Connector Type: None
> Port Type: 8251 FIFO Compatible
> Handle 0x000E
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: COM1
> Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
> External Reference Designator:
> External Connector Type: DB-9 male
> Port Type: Serial Port 16450 Compatible
> Handle 0x000F
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: COM2
> Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
> External Reference Designator:
> External Connector Type: DB-9 male
> Port Type: Serial Port 16450 Compatible
> Handle 0x0010
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: LPT1
> Internal Connector Type: DB-25 female
> External Reference Designator:
> External Connector Type: DB-25 female
> Port Type: Parallel Port ECP/EPP
> Handle 0x0011
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: Keyboard
> Internal Connector Type: PS/2
> External Reference Designator:
> External Connector Type: PS/2
> Port Type: Keyboard Port
> Handle 0x0012
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: PS/2 Mouse
> Internal Connector Type: PS/2
> External Reference Designator:
> External Connector Type: PS/2
> Port Type: Mouse Port
> Handle 0x0013
> DMI type 9, 13 bytes.
> System Slot Information
> Designation: PCI0
> Type: 32-bit PCI
> Current Usage: Available
> Length: Long
> ID: 1
> Characteristics:
> 5.0 V is provided
> PME signal is supported
> Handle 0x0014
> DMI type 9, 13 bytes.
> System Slot Information
> Designation: PCI1
> Type: 32-bit PCI
> Current Usage: Available
> Length: Long
> ID: 2
> Characteristics:
> 5.0 V is provided
> PME signal is supported
> Handle 0x0015
> DMI type 9, 13 bytes.
> System Slot Information
> Designation: PCI2
> Type: 32-bit PCI
> Current Usage: Available
> Length: Long
> ID: 3
> Characteristics:
> 5.0 V is provided
> PME signal is supported
> Handle 0x0016
> DMI type 9, 13 bytes.
> System Slot Information
> Designation: PCI3
> Type: 32-bit PCI
> Current Usage: Available
> Length: Long
> ID: 4
> Characteristics:
> 5.0 V is provided
> PME signal is supported
> Handle 0x0017
> DMI type 9, 13 bytes.
> System Slot Information
> Designation: AGP
> Type: 32-bit AGP
> Current Usage: Available
> Length: Long
> ID: 8
> Characteristics:
> 5.0 V is provided
> Handle 0x0018
> DMI type 8, 9 bytes.
> Port Connector Information
> Internal Reference Designator: USB
> Internal Connector Type: None
> External Reference Designator:
> External Connector Type: Other
> Port Type: USB
> Handle 0x0019
> DMI type 13, 22 bytes.
> BIOS Language Information
> Installable Languages: 3
> n|US|iso8859-1
> n|US|iso8859-1
> r|CA|iso8859-1
> Currently Installed Language: n|US|iso8859-1
> Handle 0x001A
> DMI type 16, 15 bytes.
> Physical Memory Array
> Location: System Board Or Motherboard
> Use: System Memory
> Error Correction Type: None
> Maximum Capacity: 768 MB
> Error Information Handle: Not Provided
> Number Of Devices: 3
> Handle 0x001B
> DMI type 17, 21 bytes.
> Memory Device
> Array Handle: 0x001A
> Error Information Handle: Not Provided
> Total Width: Unknown
> Data Width: Unknown
> Size: 512 MB
> Form Factor: DIMM
> Set: None
> Locator: A0
> Bank Locator: Bank0/1
> Type: Unknown
> Type Detail: None
> Handle 0x001C
> DMI type 17, 21 bytes.
> Memory Device
> Array Handle: 0x001A
> Error Information Handle: Not Provided
> Total Width: Unknown
> Data Width: Unknown
> Size: 512 MB
> Form Factor: DIMM
> Set: None
> Locator: A1
> Bank Locator: Bank2/3
> Type: Unknown
> Type Detail: None
> Handle 0x001D
> DMI type 17, 21 bytes.
> Memory Device
> Array Handle: 0x001A
> Error Information Handle: Not Provided
> Total Width: Unknown
> Data Width: Unknown
> Size: No Module Installed
> Form Factor: DIMM
> Set: None
> Locator: A2
> Bank Locator: Bank4/5
> Type: Unknown
> Type Detail: None
> Handle 0x001E
> DMI type 19, 15 bytes.
> Memory Array Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x0003FFFFFFF
> Range Size: 1 GB
> Physical Array Handle: 0x001A
> Partition Width: 0
> Handle 0x001F
> DMI type 20, 19 bytes.
> Memory Device Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x0001FFFFFFF
> Range Size: 512 MB
> Physical Device Handle: 0x001B
> Memory Array Mapped Address Handle: 0x001E
> Partition Row Position: 1
> Handle 0x0020
> DMI type 20, 19 bytes.
> Memory Device Mapped Address
> Starting Address: 0x00020000000
> Ending Address: 0x0003FFFFFFF
> Range Size: 512 MB
> Physical Device Handle: 0x001C
> Memory Array Mapped Address Handle: 0x001E
> Partition Row Position: 1
> Handle 0x0021
> DMI type 20, 19 bytes.
> Memory Device Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x000000003FF
> Range Size: 1 kB
> Physical Device Handle: 0x001D
> Memory Array Mapped Address Handle: 0x001E
> Partition Row Position: 1
> Handle 0x0022
> DMI type 32, 11 bytes.
> System Boot Information
> Status: No errors detected
> Handle 0x0023
> DMI type 127, 4 bytes.
> End Of Table
>
>
> Nakajima, Jun wrote:
>
> >Following info would be crucial when figuring out the problem.
> >In this particular case, it looks like test4 attempted to enable
wrong
> >PCI interrupt links (i.e. LNKA and LNKD, the ones already enabled).
> >
> >Thanks,
> >Jun
> >----
> >
> >Please file a bug at http://bugzilla.kernel.org/
> >Category: Power Management
> >Componenet: ACPI
> >
> >Attach the output from dmidecide, available in /usr/sbin/, or here:
> >http://www.nongnu.org/dmidecode/
> >
> >Attach the output from acpidmp, available in /usr/sbin/, or in here
>
>http://www.intel.com/technology/iapc/acpi/downloads/pmtools-20010730.ta
r
> >.gz
> >
> >Attach the dmesg output showing the failure, if possible.
> >
> >
> >
> >
> >>-----Original Message-----
> >>From: Steve French [mailto:smfrench@austin.rr.com]
> >>Sent: Sunday, August 24, 2003 9:33 PM
> >>To: Jeff Garzik; linux-kernel@vger.kernel.org
> >>Subject: Re: via rhine network failure on 2.6.0-test4
> >>
> >>Looks like IRQ misassignment. Disabling ACPI on test4 got networking
> >>
> >>
> >to
> >
> >
> >>work again and the IRQ assignment is back to IRQ11 for via rhine.
The
> >>assigned interrupt in the failing case (linux-2.6.0-test4) was IRQ5
> >>instead of 11 which presumably it should be - see contents of
> >>/proc/interrupts in the failing case (test4):
> >>
> >>CPU0
> >>0: 1013475 XT-PIC timer
> >>1: 1309 XT-PIC i8042
> >>2: 0 XT-PIC cascade
> >>5: 0 XT-PIC eth0
> >>9: 0 XT-PIC acpi
> >>10: 0 XT-PIC uhci-hcd, uhci-hcd
> >>12: 30047 XT-PIC i8042
> >>14: 15193 XT-PIC ide0
> >>15: 24 XT-PIC ide1
> >>NMI: 0
> >>ERR: 13
> >>
> >>The excerpt from the good boot.msg (linux-2.6.0-test3) follows:
> >>
> >><6>ACPI: Subsystem revision 20030714
> >><4> tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully
> >>
> >>
> >acquired
> >
> >
> >><4>Parsing all Control
> >>
> >>
> >>
>
>Methods:...............................................................
.
> >..
> >
> >
> >>................
> >><4>Table [DSDT](id F004) - 326 Objects with 29 Devices 82 Methods 21
> >>Regions
> >><4>ACPI Namespace successfully loaded at root c054f95c
> >><4>evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode
successful
> >><4>evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2
regs
> >>at 0000000000004020 on int 9
> >><4>Completing Region/Field/Buffer/Package
> >>initialization:..............................................
> >><4>Initialized 21/21 Regions 0/0 Fields 15/15 Buffers 10/10 Packages
> >>(334 nodes)
> >><4>Executing all Device _STA and_INI
> >>
> >>
> >methods:..............................
> >
> >
> >><4>30 Devices found containing: 30 _STA, 1 _INI methods
> >><6>ACPI: Interpreter enabled
> >><6>ACPI: Using PIC for interrupt routing
> >><6>ACPI: PCI Root Bridge [PCI0] (00:00)
> >><4>PCI: Probing PCI hardware (bus 00)
> >><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> >><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14
15)
> >><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15,
> >>disabled)
> >><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15,
> >>disabled)
> >><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14
15)
> >><6>Linux Plug and Play Support v0.97 (c) Adam Belay
> >><5>SCSI subsystem initialized
> >><6>Linux Kernel Card Services 3.1.22
> >><6> options: [pci] [pm]
> >><6>drivers/usb/core/usb.c: registered new driver usbfs
> >><6>drivers/usb/core/usb.c: registered new driver hub
> >><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
> >><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> >><6>PCI: Using ACPI for IRQ routing
> >>
> >>
> >>The corresponding excerpt from the failing (linux-2.6.0-test4)
> >>
> >>
> >boot.msg
> >
> >
> >><6>ACPI: Subsystem revision 20030813
> >><6>ACPI: Interpreter enabled
> >><6>ACPI: Using PIC for interrupt routing
> >><6>ACPI: PCI Root Bridge [PCI0] (00:00)
> >><4>PCI: Probing PCI hardware (bus 00)
> >><7>PM: Adding info for No Bus:pci0000:00
> >><7>PM: Adding info for pci:0000:00:00.0
> >><7>PM: Adding info for pci:0000:00:01.0
> >><7>PM: Adding info for pci:0000:00:0e.0
> >><7>PM: Adding info for pci:0000:00:11.0
> >><7>PM: Adding info for pci:0000:00:11.1
> >><7>PM: Adding info for pci:0000:00:11.2
> >><7>PM: Adding info for pci:0000:00:11.3
> >><7>PM: Adding info for pci:0000:00:12.0
> >><7>PM: Adding info for pci:0000:01:00.0
> >><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> >><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14
15)
> >><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15,
> >>disabled)
> >><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15,
> >>disabled)
> >><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14
15)
> >><6>Linux Plug and Play Support v0.97 (c) Adam Belay
> >><5>SCSI subsystem initialized
> >><6>drivers/usb/core/usb.c: registered new driver usbfs
> >><6>drivers/usb/core/usb.c: registered new driver hub
> >><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
> >><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> >><6>PCI: Using ACPI for IRQ routing
> >>
> >>
> >>
> >>
> >>Jeff Garzik wrote:
> >>
> >>
> >>
> >>>Steve French wrote:
> >>>
> >>>
> >>>
> >>>>The via rhine driver fails to get a dhcp address on my test system
> >>>>
> >>>>
> >on
> >
> >
> >>>>2.6.0-test4. ethereal shows no dhcp request leaving the box but
> >>>>ifconfig does show the device and it is detected in /proc/pci.
> >>>>Switching from the test3 vs. test4 snapshots built with equivalent
> >>>>configure options on the same system (SuSE 8.2) - test3 works but
> >>>>test4 does not. This is using essentially the default config for
> >>>>
> >>>>
> >both
> >
> >
> >>>>the test3 and test4 cases - the only changes are SMP disabled,
scsi
> >>>>devices disabled, Athlon, via-rhine enabled in network devices and
> >>>>
> >>>>
> >a
> >
> >
> >>>>handful of additional filesystems enabled, debug memory
allocations
> >>>>enabled. This is the first time in many months that I have seen
> >>>>problems with the via-rhine driver on 2.6
> >>>>
> >>>>Analyzing the code differences between 2.6.0-test3 and test4 (in
> >>>>via-rhine.c) is not very promising since the only line that has
> >>>>changed (kfree to free_netdev) is in the routine
> >>>>
> >>>>
> >via_rhine_remove_one
> >
> >
> >>>>that seems unlikely to cause problems sending data on the network.
> >>>>
> >>>>Ideas as to what could have caused the regression?
> >>>>
> >>>>
> >>>>
> >>>Does /proc/interrupts show any interrupts being received on your
eth
> >>>device? Does dmesg report any irq assignment problems, or similar?
> >>>
> >>>This sounds like ACPI or irq routing related.
> >>>
> >>>Jeff
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:48    [W:0.062 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site