[lkml]   [2003]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Can't read fan-speeds from i2c
ons, 20.08.2003 kl. 04.48 skrev Charles Lepple:
> Stian Jordet wrote:
> > I have a Asus CUV266-DLS, which uses the as99127f chipset. Everything
> > seems to work as it is supposed to, except for fan-speeds. They say 0.
> > Is that supposed behaviour since the as99127f doesn't have any
> > datasheets, or am I doing something wrong?
> Have you tried adjusting the fan divisors (fan_div* in
> /sys/bus/i2c/devices/*)? Keep multiplying the fan divisor by two, and
> check the fan_input* devices-- you may have slow fans (or divide-by-two
> speed sensors), and you might need a longer sampling interval to see the
> lower speed.

Wow, that worked! Thank you very much :) I would never have found this
out without you :) My fans are rather slow, so that might have been the
problem. Anyway, thank you :)

Best regards,

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.082 / U:3.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site