[lkml]   [2003]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] (2.4.2x) Driver for Medley software RAID (Silicon Image 3112 SATARaid, CMD680, etc?) for testing
In response to some early feedback:

If you test this driver and it doesn't work, please include the output
from dmesg in your bug report (trace is enabled by default).

If it does work, currently it is logging 2 lines for each request, which
means it will be pretty slow if you are using syslogd/klogd.

So when your array is detected and you can mount a partition, please
remove this excessive trace by removing the following line from


It is not enough to set the value to 0 you need to remove or comment out
that line altogether to remove the trace (my mistake).

I will post minor updates to the driver on

// Thomas

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.034 / U:1.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site