lkml.org 
[lkml]   [2003]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Subjectweird pcmcia problem
    From
    Date
    Running 2.6.0-test3 (both with and without your recent yenta socket
    patches) pcmcia cards present during boot don't show up until they are
    removed and reinserted. Once reinserted, they work fine. This only
    seems to occur if yenta_socket is build into the kernel; if support is
    modular, cards appear to be recognized properly at boot time. I am
    running on a thinkpad t21. Let me know if I can help with this
    problem in any way... thanks
    -nld

    messages from boot:
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta: ISA IRQ list 04b8, PCI irq11
    Socket status: 30000010
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta: ISA IRQ list 04b8, PCI irq11
    Socket status: 30000006

    <later>

    cs: warning: no high memory space available!
    cs: unable to map card memory!
    cs: unable to map card memory!
    cs: IO port probe 0x0c00-0x0cff: clean.
    cs: IO port probe 0x0800-0x08ff: clean.
    cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x3b8-0x3df 0x4d0-0x4d7
    cs: IO port probe 0x0a00-0x0aff: clean.
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:47    [W:0.021 / U:0.056 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site