lkml.org 
[lkml]   [2003]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: 2.6.0-test3 latest bk hangs when enabling IO-APIC
From
Date
man, 18.08.2003 kl. 19.53 skrev Brown, Len: 
> Try booting with pci=noacpi, and if that doesn't work acpi=off
> If either of those work, then file in bugzilla with component=ACPI and
> assign it to len.brown@intel.com

It works when booting with noapic, but not with acpi=off nor pci=noapic.
Does that mean I can't blame you for it?

Best regards,
Stian

> > --Original Message--
> > From: Stian Jordet [mailto:liste@jordet.nu]
> > Sent: Monday, August 18, 2003 9:10 AM
> > To: linux-kernel@vger.kernel.org
> > Subject: 2.6.0-test3 latest bk hangs when enabling IO-APIC
> >
> >
> > Hello,
> >
> > latest bk of 2.6.0-test3 hangs with these three lines:
> >
> > ENABLING IO-APIC IRQs
> > Setting 2 in the phys_id_present_map
> > ...changing IO-APIC physical APIC ID to 2 ... ok.
> >
> > And there it stays forever. 2.6.0-test3 worked like a charm. This is a
> > Asus CUV265-DLS motherboard. Dual P3.
> >
> > Should I file a bugreport at bugzilla?
> >
> > Best regards,
> > Stian

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.045 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site