[lkml]   [2003]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
See that you've got the latest BIOS -- Asus's web page advertises 1008:

If acpi=off is still required to boot, then file a bug at category=Power Management; Component=ACPI;

Then I'll ask you:
1. can you try the latest 2.6 kernel -- it has slightly newer ACPI code.
2. can you attach the output of acpidmp:
3. can you attch the output of dmidecode:


> -----Original Message-----
> From: Erich Stamberger []
> Sent: Saturday, August 16, 2003 7:57 PM
> To:
> Subject: ASUS PR-DLSW: ACPI Bugs
> Hello,
> 2.6.0-test3 with ACPI enabled fails to boot on ASUS PR-DLSW: Cannot
> open root device .. Obviously the SCSI controllers (LSI 1010-66)
> are not detected (complete dmesg from serial console below).
> When setting pci=noacpi the machine hangs in an endless loop
> trying to initialise the SCSI bus.
> With acpi=off or CONFIG_ACPI_HT_ONLY the machine
> boots (lspci -vvx below).
> Any information / pointers will be appreciated.
> Best regards
> Erich
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.054 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site