[lkml]   [2003]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Communication problem with via-rhine in kernel-2.6.0-test3-bk3+
On Mon, Aug 18, 2003 at 08:28:24AM -0700, Hassard, Stephen wrote:
> Hi all,
> I've been happily using the Rhine-II NIC on my VIA Epia-800 with
> 2.6.0-test3, but ever since bk3 via-rhine seems to be broken.
> 2.6.0-test3-bk2 works without problems.
> I've contacted the driver maintainer, Roger Luethi, and he mentioned that if
> it was a problem since 2.6.0-test3, I should contact the kernel mailing
> list.
> The interface is detected properly, but no data is transmitted. DHCP doesn't
> work. When I manually configure the interface and try to send data, I get
> the following error, which repeats:
> >>
> eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
> eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
> <<

Does booting with "pci=noapic" or "acpi=off" or "noapic" help?


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.048 / U:1.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site