[lkml]   [2003]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectCommunication problem with via-rhine in kernel-2.6.0-test3-bk3+
Hi all,

I've been happily using the Rhine-II NIC on my VIA Epia-800 with
2.6.0-test3, but ever since bk3 via-rhine seems to be broken.
2.6.0-test3-bk2 works without problems.

I've contacted the driver maintainer, Roger Luethi, and he mentioned that if
it was a problem since 2.6.0-test3, I should contact the kernel mailing

The interface is detected properly, but no data is transmitted. DHCP doesn't
work. When I manually configure the interface and try to send data, I get
the following error, which repeats:
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.

Any help would be appreciated.

I'm not subscribed to this list, so please CC responses to me.

Stephen Hassard
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.029 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site