lkml.org 
[lkml]   [2003]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
From
Date
Subject[patch] Problems building drivers/scsi/qla1280.c in BK current
Hi,

When building I got a failure :

drivers/scsi/qla1280.c: In function `qla1280_done':
drivers/scsi/qla1280.c:1833: warning: implicit declaration of function `qla1280_get_target_options'
drivers/scsi/qla1280.c: At top level:
drivers/scsi/qla1280.c:4506: warning: type mismatch with previous implicit declaration
drivers/scsi/qla1280.c:1833: warning: previous implicit declaration of `qla1280_get_target_options'
drivers/scsi/qla1280.c:4506: warning: `qla1280_get_target_options' was previously implicitly declared to return `int'
drivers/scsi/qla1280.c:4830: warning: initialization from incompatible pointer type
drivers/scsi/qla1280.c:4830: error: unknown field `command' specified in initializer
drivers/scsi/sym53c8xx_2/sym_glue.c: In function `sym53c8xx_pci_init':
drivers/scsi/sym53c8xx_2/sym_glue.c:2323: warning: `check_region' is deprecated (declared at include/linux/ioport.h:117)
make[2]: *** [drivers/scsi/qla1280.o] Error 1

qla1280.c seems to use LINUX_KERNEL_VERSION where I think it really
wants LINUX_VERSION_CODE. While I was there I changed the other
checks to use the KERNEL_VERSION macro.

I also changed the blk.h include because it says :
In file included from drivers/scsi/qla1280.c:299:
include/linux/blk.h:1:2: warning: #warning this file is obsolete, please use linux/blkdev.h instead

Also I required the attached change to qla1280.h

-i
ianw@gelato.unsw.edu.au
http://www.gelato.unsw.edu.au===== qla1280.c 1.43 vs edited =====
--- 1.43/drivers/scsi/qla1280.c Sun Aug 3 06:33:43 2003
+++ edited/qla1280.c Fri Aug 15 09:12:39 2003
@@ -296,7 +296,7 @@
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
-#include <linux/blk.h>
+#include <linux/blkdev.h>
#include <linux/stat.h>
#include <linux/slab.h>
#include <linux/pci_ids.h>
@@ -311,13 +311,13 @@
#include <asm/types.h>
#include <asm/system.h>

-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
#include "sd.h"
#endif
#include "scsi.h"
#include "hosts.h"

-#if LINUX_VERSION_CODE < 0x020407
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,7)
#error "Kernels older than 2.4.7 are no longer supported"
#endif

@@ -385,7 +385,7 @@

#define NVRAM_DELAY() udelay(500) /* 2 microseconds */

-#if LINUX_VERSION_CODE < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
#define HOST_LOCK &io_request_lock
#define irqreturn_t void
#define IRQ_RETVAL(foo)
@@ -412,7 +412,7 @@
static void qla1280_done(struct scsi_qla_host *, struct srb **, struct srb **);
static void qla1280_done_q_put(struct srb *, struct srb **, struct srb **);
static int qla1280_slave_configure(Scsi_Device *);
-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
static void qla1280_select_queue_depth(struct Scsi_Host *, Scsi_Device *);
void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *);
#endif
@@ -546,7 +546,7 @@
#define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer)
#define CMD_RESULT(Cmnd) Cmnd->result
#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
#define CMD_HOST(Cmnd) Cmnd->host
#define CMD_REQUEST(Cmnd) Cmnd->request.cmd
#define SCSI_BUS_32(Cmnd) Cmnd->channel
@@ -866,7 +866,7 @@
printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n",
bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn));

-#if LINUX_VERSION_CODE >= 0x020545
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,45)
template->slave_configure = qla1280_slave_configure;
#endif
host = scsi_register(template, sizeof(struct scsi_qla_host));
@@ -876,7 +876,7 @@
goto error;
}

-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
scsi_set_pci_device(host, pdev);
#else
scsi_set_device(host, &pdev->dev);
@@ -909,7 +909,7 @@
host->max_lun = MAX_LUNS - 1;
host->max_id = MAX_TARGETS;
host->max_sectors = 1024;
-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
host->select_queue_depths = qla1280_select_queue_depth;
#endif

@@ -1508,7 +1508,7 @@
* Return the disk geometry for the given SCSI device.
**************************************************************************/
int
-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
qla1280_biosparam(Disk * disk, kdev_t dev, int geom[])
#else
qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev,
@@ -1516,7 +1516,7 @@
#endif
{
int heads, sectors, cylinders;
-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
unsigned long capacity = disk->capacity;
#endif

@@ -1676,7 +1676,7 @@
int target = device->id;
int status = 0;
struct nvram *nv;
-#if LINUX_VERSION_CODE < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
unsigned long flags;
#endif

@@ -1694,7 +1694,7 @@
scsi_adjust_queue_depth(device, 0, default_depth);
}

-#if LINUX_VERSION_CODE > 0x020500
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
nv->bus[bus].target[target].parameter.f.enable_sync = device->sdtr;
nv->bus[bus].target[target].parameter.f.enable_wide = device->wdtr;
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
@@ -1716,7 +1716,7 @@
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
}

-#if LINUX_VERSION_CODE < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
spin_lock_irqsave(HOST_LOCK, flags);
#endif
if (nv->bus[bus].target[target].parameter.f.enable_sync) {
@@ -1724,13 +1724,13 @@
}

qla12160_get_target_parameters(ha, device);
-#if LINUX_VERSION_CODE < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
spin_unlock_irqrestore(HOST_LOCK, flags);
#endif
return status;
}

-#if LINUX_VERSION_CODE < 0x020545
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
/**************************************************************************
* qla1280_select_queue_depth
*
@@ -1828,7 +1828,7 @@
CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
ha->actthreads--;

-#if LINUX_KERNEL_VERSION < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
if (cmd->cmnd[0] == INQUIRY)
qla1280_get_target_options(cmd, ha);
#endif
@@ -3211,7 +3211,7 @@
timer.function = qla1280_mailbox_timeout;
add_timer(&timer);

-#if LINUX_VERSION_CODE < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
spin_unlock_irq(HOST_LOCK);
#endif
WRT_REG_WORD(&reg->host_cmd, HC_SET_HOST_INT);
@@ -3220,7 +3220,7 @@
wait_for_completion(&wait);
del_timer_sync(&timer);

-#if LINUX_VERSION_CODE < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
spin_lock_irq(HOST_LOCK);
#endif

@@ -4497,7 +4497,7 @@
}


-#if LINUX_KERNEL_VERSION < 0x020500
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
/*
*
*/===== qla1280.h 1.20 vs edited =====
--- 1.20/drivers/scsi/qla1280.h Wed Jul 23 19:12:03 2003
+++ edited/qla1280.h Fri Aug 15 09:15:06 2003
@@ -1148,7 +1148,6 @@
.release = qla1280_release, \
.info = qla1280_info, \
.ioctl = NULL, \
- .command = NULL, \
.queuecommand = qla1280_queuecommand, \
.eh_strategy_handler = NULL, \
.eh_abort_handler = qla1280_eh_abort, \
\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.039 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site