lkml.org 
[lkml]   [2003]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 2.6.0-test3]bugfix for initialization bug in adm1021 driver
From
Date
While initializing the adm1021 device, the driver is performing a conversion
from fixed point to Celcius on values that were declaired as Celcius. On
my Dell Precision 220 this results in a shutdown after a couple of minutes
running.

This is a very simple patch against the 2.6.0-test3 tree that just removes the
conversion.

--rustyl


diff -urN linux-2.6.0-test3/drivers/i2c/chips/adm1021.c linux-2.6.0-test3-patched/drivers/i2c/chips/adm1021.c
--- linux-2.6.0-test3/drivers/i2c/chips/adm1021.c 2003-08-08 21:31:16.000000000 -0700
+++ linux-2.6.0-test3-patched/drivers/i2c/chips/adm1021.c 2003-08-12 16:54:25.000000000 -0700
@@ -356,13 +356,13 @@
{
/* Initialize the adm1021 chip */
adm1021_write_value(client, ADM1021_REG_TOS_W,
- TEMP_TO_REG(adm1021_INIT_TOS));
+ adm1021_INIT_TOS);
adm1021_write_value(client, ADM1021_REG_THYST_W,
- TEMP_TO_REG(adm1021_INIT_THYST));
+ adm1021_INIT_THYST);
adm1021_write_value(client, ADM1021_REG_REMOTE_TOS_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_TOS));
+ adm1021_INIT_REMOTE_TOS);
adm1021_write_value(client, ADM1021_REG_REMOTE_THYST_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_THYST));
+ adm1021_INIT_REMOTE_THYST);
/* Enable ADC and disable suspend mode */
adm1021_write_value(client, ADM1021_REG_CONFIG_W, 0);
/* Set Conversion rate to 1/sec (this can be tinkered with) */


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.069 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site