[lkml]   [2003]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.6.0test3 problems on Acer TravelMate 260 (ALSA,ACPIvsSynaptics,yenta)
On Mon, Aug 11, 2003 at 12:22:36PM +0200, Santiago Garcia Mantinan wrote:
> There are some weird old problems, like the yenta problem, the problem with
> the cardbus interface is that you have to insert the card twice so that it
> notices the card is in, everything else seems ok, on 2.4 there is the same
> problem, so I'm using the pcmcia-cs i82365 driver which is working
> perfectly. This is what the 2.6 yenta driver says on startup:
> Yenta: CardBus bridge found at 0000:01:09.0 [1025:1024]
> Yenta IRQ list 02b8, PCI irq10
> Socket status: 30000007

Please supply the following information:

- does 2.6.0-test3 detect the card at boot ?
- if not, what are the complete kernel messages ?

- does 2.6.0-test3 detect it at every insertion after the first
"insert remove insert" cycle, or does it always need an even
number of insertions for it to be recognised?

- does 2.4 and 2.6-test3 yenta find the same IRQs ?

- which version of pcmcia-cs are you using with 2.4 ?

- which IRQ(s) does 2.4 i82365 use ?

Russell King ( The developer of ARM Linux

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.087 / U:3.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site