lkml.org 
[lkml]   [2003]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.0test3 problems on Acer TravelMate 260 (ALSA,ACPIvsSynaptics,yenta)
Hey, what a quick reply, here goes the info you asked for, if you need any
more just ask for it.

> - does 2.6.0-test3 detect the card at boot ?
> - if not, what are the complete kernel messages ?

Yes and no, I mean, it detects a card, but not the card it has in, it tries
to load memory_cs when I have a wireless card in, the card should load
hostap_cs, in fact if after booting I remove it and insert it twice, it
recognices the card well and tries to load hostap_cs.

Here are the messages it outputs:

Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: IRQ 10 for device 0000:01:09.0 doesn't match PIRQ mask - try
pci=usepirqmask
PCI: Found IRQ 11 for device 0000:01:09.0
PCI: Sharing IRQ 11 with 0000:00:1d.1
IRQ routing conflict for 0000:01:09.0, have irq 10, want irq 11
Yenta: CardBus bridge found at 0000:01:09.0 [1025:1024]
Yenta IRQ list 02b8, PCI irq10
Socket status: 30000811
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff
0xdc000-0x103fff

> - does 2.6.0-test3 detect it at every insertion after the first
> "insert remove insert" cycle, or does it always need an even
> number of insertions for it to be recognised?

It always needs an even number of insertions.

> - does 2.4 and 2.6-test3 yenta find the same IRQs ?

Seems so, these are the messages for yenta on 2.4.21:

Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 01:09.0
PCI: Sharing IRQ 11 with 00:1d.1
IRQ routing conflict for 01:09.0, have irq 10, want irq 11
Yenta IRQ list 00b8, PCI irq10
Socket status: 30000007
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff
0xe0000-0xfffff

> - which version of pcmcia-cs are you using with 2.4 ?

3.2.2

> - which IRQ(s) does 2.4 i82365 use ?

The same ones as yenta, here you have the messages I get with it just in
case:

Linux PCMCIA Card Services 3.2.2
kernel build: 2.4.21 #1 Sat Jun 14 19:43:14 CEST 2003
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 11 for device 01:09.0
PCI: Sharing IRQ 11 with 00:1d.1
IRQ routing conflict for 01:09.0, have irq 10, want irq 11
O2Micro OZ6912 rev 00 PCI-to-CardBus at slot 01:09, mem 0x10001000
host opts [0]: [pci/way] [pci irq 10] [lat 32/176] [bus 2/5]
ISA irqs (default) = 3,4,5,7 PCI status changes

Hope this helps, if you need anything else, just ask for it.

Regards...
--
Manty/BestiaTester -> http://manty.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.084 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site