lkml.org 
[lkml]   [2003]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] lirc for 2.5/2.6 kernels - 20030802
Hi!

Here's updated "bttv_remote.c" patch. This time with config option.

Pavel

--- /usr/src/tmp/linux/drivers/input/keyboard/Kconfig 2003-08-10 21:22:48.000000000 +0200
+++ /usr/src/linux/drivers/input/keyboard/Kconfig 2003-08-11 14:51:53.000000000 +0200
@@ -99,6 +99,11 @@

This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
- The module will be called xtkbd.o. If you want to compile it as a
+ The module will be called 98kbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.

+config KEYBOARD_BTTV
+ tristate "BTTV remote control support"
+ depends on INPUT && INPUT_KEYBOARD
+ help
+ Say Y here if you want remote control on your bttv card to work.
--- /usr/src/tmp/linux/drivers/input/keyboard/Makefile 2003-03-27 10:40:00.000000000 +0100
+++ /usr/src/linux/drivers/input/keyboard/Makefile 2003-08-11 14:52:08.000000000 +0200
@@ -11,3 +11,4 @@
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_98KBD) += 98kbd.o
+obj-$(CONFIG_KEYBOARD_BTTV) += bttv_remote.o
--- /usr/src/tmp/linux/drivers/input/keyboard/bttv_avermedia.c 2003-08-11 14:06:22.000000000 +0200
+++ /usr/src/linux/drivers/input/keyboard/bttv_avermedia.c 2003-08-11 14:26:23.000000000 +0200
@@ -0,0 +1,49 @@
+/* Copyright 2003 Pavel Machek <pavel@ucw.cz>, distribute under GPLv2.
+ *
+ * Translation codes for controller that came with TVPhone98w/VCR. It has
+ * only one label "AVerMedia" on it.
+ */
+
+int
+decode_bttv_avermedia(long code)
+{
+ switch (code) {
+ case 0x8577c0: return KEY_TUNER;
+ case 0x4577c0: return KEY_TV;
+ case 0xc577c0: return KEY_EJECTCD; /* Unmarked on my controller */
+ case 0x577c0: return KEY_POWER;
+ case 0xa577c0: return KEY_KP1;
+ case 0x6577c0: return KEY_KP2;
+ case 0xe577c0: return KEY_KP3;
+ case 0x2577c0: return KEY_VIDEO;
+ case 0x9577c0: return KEY_KP4;
+ case 0x5577c0: return KEY_KP5;
+ case 0xd577c0: return KEY_KP6;
+ case 0x1577c0: return KEY_AUDIO;
+ case 0xb577c0: return KEY_KP7;
+ case 0x7577c0: return KEY_KP8;
+ case 0xf577c0: return KEY_KP9;
+ case 0x3577c0: return KEY_ZOOM;
+ case 0x8d77c0: return KEY_KP0;
+ case 0x4d77c0: return KEY_CYCLEWINDOWS; /* DISPLAY/L */
+ case 0xcd77c0: return KEY_AGAIN; /* LOOP/R */
+ case 0xd77c0: return KEY_INFO; /* preview */
+ case 0xad77c0: return KEY_SEARCH; /* autoscan */
+ case 0x6d77c0: return KEY_BREAK; /* freeze */
+ case 0xed77c0: return KEY_PVR; /* capture */
+ case 0x2d77c0: return KEY_MUTE;
+ case 0x9d77c0: return KEY_RECORD;
+ case 0x5d77c0: return KEY_PAUSE;
+ case 0xdd77c0: return KEY_STOP;
+ case 0x1d77c0: return KEY_PLAY;
+ case 0xbd77c0: return KEY_RED;
+ case 0x7d77c0: return KEY_VOLUMEDOWN;
+ case 0xfd77c0: return KEY_VOLUMEUP;
+ case 0x3d77c0: return KEY_GREEN;
+ case 0x85f7c0: return KEY_YELLOW;
+ case 0x45f7c0: return KEY_CHANNELDOWN;
+ case 0xc5f7c0: return KEY_CHANNELUP;
+ case 0x5f7c0: return KEY_BLUE;
+ default: printk("bttv_avermedia: unknown code %lx\n", code);
+ }
+}
--- /usr/src/tmp/linux/drivers/input/keyboard/bttv_remote.c 2003-08-11 00:55:34.000000000 +0200
+++ /usr/src/linux/drivers/input/keyboard/bttv_remote.c 2003-08-11 15:02:22.000000000 +0200
@@ -0,0 +1,341 @@
+/*
+ * Copyright (c) 2000-2001 Vojtech Pavlik
+ * Copyright (c) 2003 Pavel Machek
+ *
+ * (L) by Artur Lipowski <alipowski@interia.pl>
+ * patch for the AverMedia by Santiago Garcia Mantinan <manty@i.am>
+ * and Christoph Bartelmus <lirc@bartelmus.de>
+ * patch for the BestBuy by Miguel Angel Alvarez <maacruz@navegalia.com>
+ * patch for the Winfast TV2000 by Juan Toledo
+ * <toledo@users.sourceforge.net>
+ * patch for the I-O Data GV-BCTV5/PCI by Jens C. Rasmussen
+ * <jens.rasmussen@ieee.org>
+ */
+
+/*
+ * Driver for bttv cards.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include "../../media/video/bttv.h"
+#include "../../media/video/bttvp.h"
+#include "bttv_avermedia.c"
+
+MODULE_AUTHOR("Pavel Machek <pavel@ucw.cz>");
+MODULE_DESCRIPTION("BTTV infrared remote control");
+MODULE_LICENSE("GPL");
+
+static struct input_dev gpio_dev;
+
+static char *gpio_name = "BTTV remote control";
+static char *gpio_phys = "bttv/input0";
+
+static unsigned short gpio_keycode[KEY_MAX];
+
+struct rcv_info {
+ int bttv_id;
+ int card_id;
+ unsigned long gpio_mask;
+ unsigned long gpio_enable;
+ unsigned long gpio_lock_mask;
+ unsigned long gpio_xor_mask;
+ unsigned int soft_gap;
+ unsigned char sample_rate;
+ unsigned char code_length;
+};
+
+static struct rcv_info rcv_infos[] = {
+ {BTTV_UNKNOWN, 0, 0, 0, 0, 0, 0, 1, 0},
+ {BTTV_AVERMEDIA, 0, 0x00f88000, 0, 0x0010000, 0x00010000, 0, 10, 32},
+ {BTTV_AVPHONE98, 0x00011461, 0x003b8000, 0x00004000, 0x0800000, 0x00800000, 0, 10, 0}, /*mapped to Capture98*/
+ {BTTV_AVERMEDIA98, 0x00021461, 0x003b8000, 0x00004000, 0x0800000, 0x00800000, 0, 10, 0}, /*mapped to Capture98*/
+ {BTTV_AVPHONE98, 0x00031461, 0x00f88000, 0, 0x0010000, 0x00010000, 0, 10, 32}, /*mapped to Phone98*/
+ /* is this one correct? */
+ {BTTV_AVERMEDIA98, 0x00041461, 0x00f88000, 0, 0x0010000, 0x00010000, 0, 10, 32}, /*mapped to Phone98*/
+ /* work-around for VDOMATE */
+ {BTTV_AVERMEDIA98, 0x03001461, 0x00f88000, 0, 0x0010000, 0x00010000, 0, 10, 32}, /*mapped to Phone98*/
+ /* reported by Danijel Korzinek, AVerTV GOw/FM */
+ {BTTV_AVERMEDIA98, 0x00000000, 0x00f88000, 0, 0x0010000, 0x00010000, 0, 10, 32}, /*mapped to Phone98*/
+};
+
+static int debug = 0;
+static int card = 0;
+static int minor = -1;
+static int bttv_id = BTTV_UNKNOWN;
+static unsigned long gpio_mask = 0;
+static unsigned long gpio_enable = 0;
+static unsigned long gpio_lock_mask = 0;
+static unsigned long gpio_xor_mask = 0;
+static unsigned int soft_gap = 0;
+static unsigned char sample_rate = 10;
+
+static unsigned char code_length = 0;
+static unsigned char code_bytes = 1;
+
+#define MAX_BYTES 8
+
+#define SUCCESS 0
+#define LOGHEAD "lirc_gpio (%d): "
+
+/* how many bits GPIO value can be shifted right before processing
+ * it is computed from the value of gpio_mask_parameter
+ */
+static unsigned char gpio_pre_shift = 0;
+
+static int build_key(unsigned long gpio_val, unsigned char codes[MAX_BYTES])
+{
+ unsigned long mask = gpio_mask;
+ unsigned char shift = 0;
+
+ dprintk(LOGHEAD "gpio_val is %lx\n",card,(unsigned long) gpio_val);
+
+ gpio_val ^= gpio_xor_mask;
+
+ if (gpio_lock_mask && (gpio_val & gpio_lock_mask)) {
+ return -EBUSY;
+ }
+
+ switch (bttv_id)
+ {
+ case BTTV_AVERMEDIA98:
+ if (bttv_write_gpio(card, gpio_enable, gpio_enable)) {
+ dprintk(LOGHEAD "cannot write to GPIO\n", card);
+ return -EIO;
+ }
+ if (bttv_read_gpio(card, &gpio_val)) {
+ dprintk(LOGHEAD "cannot read GPIO\n", card);
+ return -EIO;
+ }
+ if (bttv_write_gpio(card, gpio_enable, 0)) {
+ dprintk(LOGHEAD "cannot write to GPIO\n", card);
+ return -EIO;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* extract bits from "raw" GPIO value using gpio_mask */
+ codes[0] = 0;
+ gpio_val >>= gpio_pre_shift;
+ while (mask) {
+ if (mask & 1u) {
+ codes[0] |= (gpio_val & 1u) << shift++;
+ }
+ mask >>= 1;
+ gpio_val >>= 1;
+ }
+
+ dprintk(LOGHEAD "code is %lx\n",card,(unsigned long) codes[0]);
+ switch (bttv_id)
+ {
+ case BTTV_AVERMEDIA:
+ codes[2] = (codes[0]<<2)&0xff;
+ codes[3] = (~codes[2])&0xff;
+ codes[0] = 0x02;
+ codes[1] = 0xFD;
+ break;
+ case BTTV_AVPHONE98:
+ codes[2] = ((codes[0]&(~0x1))<<2)&0xff;
+ codes[3] = (~codes[2])&0xff;
+ if (codes[0]&0x1) {
+ codes[0] = 0xc0;
+ codes[1] = 0x3f;
+ } else {
+ codes[0] = 0x40;
+ codes[1] = 0xbf;
+ }
+ break;
+ case BTTV_AVERMEDIA98:
+ break;
+ default:
+ break;
+ }
+
+ return SUCCESS;
+}
+
+static void poll_me(void)
+{
+ static unsigned long next_time = 0;
+ static unsigned char codes[MAX_BYTES];
+ unsigned long code = 0;
+ unsigned char cur_codes[MAX_BYTES];
+
+ if (bttv_read_gpio(card, &code)) {
+ dprintk(LOGHEAD "cannot read GPIO\n", card);
+ return -EIO;
+ }
+
+ if (build_key(code, cur_codes)) {
+ return -EFAULT;
+ }
+
+ if (soft_gap) {
+ if (!memcmp(codes, cur_codes, code_bytes) &&
+ jiffies < next_time) {
+ return -EAGAIN;
+ }
+ next_time = jiffies + soft_gap;
+ }
+
+ memcpy(codes, cur_codes, code_bytes);
+
+ input_report_key(&gpio_dev, decode_bttv_avermedia(code), 1);
+ input_report_key(&gpio_dev, decode_bttv_avermedia(code), 0);
+ input_sync(&gpio_dev);
+ return 0;
+}
+
+/* main function of the polling thread
+ */
+static int lirc_thread(void *unused)
+{
+ daemonize("bttv_remote_poller");
+ do {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(HZ/10);
+ poll_me();
+ } while (1);
+ return 0;
+}
+
+int gpio_remote_init(void)
+{
+ int ret;
+ unsigned int mask;
+
+ /* "normalize" gpio_mask
+ * this means shift it right until first bit is set
+ */
+ while (!(gpio_mask & 1u)) {
+ gpio_pre_shift++;
+ gpio_mask >>= 1;
+ }
+
+ if (gpio_enable) {
+ if(bttv_gpio_enable(card, gpio_enable, gpio_enable)) {
+ printk(LOGHEAD "gpio_enable failure\n", minor);
+ return -EIO;
+ }
+ }
+
+ /* translate ms to jiffies */
+ soft_gap = (soft_gap*HZ) / 1000;
+ return 0;
+}
+
+static int __init gpio_init(void)
+{
+ int i;
+ int type,cardid,card_type;
+
+ request_module("bttv");
+
+ if(bttv_get_cardinfo(card,&type,&cardid)==-1) {
+ printk(LOGHEAD "could not get card type\n", minor);
+ }
+ printk(LOGHEAD "card type 0x%x, id 0x%x\n",minor, type, cardid);
+
+ if (type == BTTV_UNKNOWN) {
+ printk(LOGHEAD "cannot detect TV card nr %d!\n",
+ minor, card);
+ return -EBADRQC;
+ }
+ for (card_type = 1;
+ card_type < sizeof(rcv_infos)/sizeof(struct rcv_info);
+ card_type++) {
+ if (rcv_infos[card_type].bttv_id == type &&
+ (rcv_infos[card_type].card_id == 0 ||
+ rcv_infos[card_type].card_id == cardid)) {
+ bttv_id = rcv_infos[card_type].bttv_id;
+ gpio_mask = rcv_infos[card_type].gpio_mask;
+ gpio_enable = rcv_infos[card_type].gpio_enable;
+ gpio_lock_mask = rcv_infos[card_type].gpio_lock_mask;
+ gpio_xor_mask = rcv_infos[card_type].gpio_xor_mask;
+ soft_gap = rcv_infos[card_type].soft_gap;
+ sample_rate = rcv_infos[card_type].sample_rate;
+ code_length = rcv_infos[card_type].code_length;
+ break;
+ }
+ if (type==BTTV_AVPHONE98 && cardid==0x00011461) {
+ bttv_id = BTTV_AVERMEDIA98;
+ }
+ if (type==BTTV_AVERMEDIA98 && cardid==0x00041461) {
+ bttv_id = BTTV_AVPHONE98;
+ }
+ if (type==BTTV_AVERMEDIA98 && cardid==0x03001461) {
+ bttv_id = BTTV_AVPHONE98;
+ }
+ if (type==BTTV_AVERMEDIA98 && cardid==0x00000000) {
+ bttv_id = BTTV_AVPHONE98;
+ }
+ if (card_type == sizeof(rcv_infos)/sizeof(struct rcv_info)) {
+ printk(LOGHEAD "TV card type %x not supported!\n",
+ minor, type);
+ return -EBADRQC;
+ }
+ }
+
+ if (gpio_remote_init())
+ return -EIO;
+
+ init_input_dev(&gpio_dev);
+
+ for (i=0; i<KEY_MAX; i++)
+ gpio_keycode[i] = i;
+ gpio_dev.evbit[0] = BIT(EV_KEY);
+ gpio_dev.keycode = gpio_keycode;
+ gpio_dev.keycodesize = sizeof(unsigned short);
+ gpio_dev.keycodemax = KEY_MAX;
+
+ for (i = 0; i < 0x78; i++)
+ if (gpio_keycode[i])
+ set_bit(gpio_keycode[i], gpio_dev.keybit);
+
+ gpio_dev.name = gpio_name;
+ gpio_dev.phys = gpio_phys;
+ gpio_dev.id.bustype = BUS_AMIGA;
+ gpio_dev.id.vendor = 0x1234;
+ gpio_dev.id.product = 0x5678;
+ gpio_dev.id.version = 0x90ab;
+
+ input_register_device(&gpio_dev);
+ kernel_thread(lirc_thread, NULL, 0);
+
+ printk(KERN_INFO "input: %s\n", gpio_name);
+ return 0;
+}
+
+static void __exit gpio_exit(void)
+{
+ input_unregister_device(&gpio_dev);
+}
+
+late_initcall(gpio_init);
+module_exit(gpio_exit);
--
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.151 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site