lkml.org 
[lkml]   [2003]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPROBLEM: 'make modules' fails at grep -v '^#' | perl -s script_asm.pl -ncr710 FAILING when trying to build linux-2.4.21
[1.] 
'make modules' fails at grep -v '^#' | perl -s script_asm.pl -ncr710 FAILING
when trying to build linux-2.4.21 downloaded from www.kernel.org:

The latest stable version of the Linux kernel is: 2.4.21 2003-06-13 14:53 UTC
F V VI C Changelog

[2.]
When performing a 'make modules' and including 'SCSI support -> SCSI low-level
drivers -> Simple 53c710 SCSI support (Compaq, NCR machines)'
(CONFIG_SCSI_SIM710=m) during a make menuconfig I get the following make error:

gcc -D__KERNEL__ -I/usr/src/linux-2.4.21/include -Wall -Wstrict-prototypes
-Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe
-mpreferred-stack-boundary=2 -march=athlon -DMODULE -nostdinc -iwithprefix
include -DKBUILD_BASENAME=scsi_syms -DEXPORT_SYMTAB -c scsi_syms.c
ld -m elf_i386 -r -o scsi_mod.o scsi.o hosts.o scsi_ioctl.o constants.o
scsicam.o scsi_proc.o scsi_error.o scsi_obsolete.o scsi_queue.o scsi_lib.o
scsi_merge.o
scsi_dma.o scsi_scan.o scsi_syms.o
ln -sf sim710.scr fake7.c
gcc -E -D__KERNEL__ -I/usr/src/linux-2.4.21/include -traditional -DCHIP=710
fake7.c |
grep -v '^#' | perl -s script_asm.pl -ncr710
script_asm.pl : Illegal combination of registers in line 72 : MOVE CTEST7 &
0xef TO
CTEST7
Either source and destination registers must be the same,
or either source or destination register must be SFBR.
make[2]: *** [sim710_d.h] Error 255
make[2]: Leaving directory `/usr/src/linux-2.4.21/drivers/scsi'
make[1]: *** [_modsubdir_scsi] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.21/drivers'
make: *** [_mod_drivers] Error 2

[3.]
CONFIG_SCSI_SIM710 SCSI support SCSI low-level drivers Simple 53c710 SCSI
support (Compaq, NCR machines) perl -s script_asm.pl -ncr710

[4.]
Linux version 2.4.22-pre9 (root@test) (gcc version 3.2 20020903 (Red Hat Linux
8.0 3.2-7)) #2 Sat Aug 2 17:57:41 MDT 2003

[5.]

[6.]
set CONFIG_SCSI_SIM710=m in .config
make modules

[7.]

[7.1.]
sh /usr/src/linux/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux test 2.4.22-pre9 #2 Sat Aug 2 17:57:41 MDT 2003 i686 athlon i386
GNU/Linux
Gnu C 3.2
Gnu make 3.79.1
util-linux 2.11r
mount 2.11r
modutils 2.4.18
e2fsprogs 1.27
jfsutils 1.0.17
reiserfsprogs 3.6.2
pcmcia-cs 3.1.31
PPP 2.4.1
isdn4k-utils 3.1pre4
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0.12
Modules Loaded ide-cd cdrom cmpci soundcore autofs eepro100 mii
iptable_filter ip_tables ohci1394 ieee1394 mousedev keybdev input hid usb-uhci
ehci-hcd
usb-ohci usbcore

[7.2.]
bash: /proc/cpuinfo: Permission denied
[root@test Documentation]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(TM) XP2400+
stepping : 1
cpu MHz : 2014.579
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 4010.80

[7.3.]
cat /proc/modules
ide-cd 35424 1 (autoclean)
cdrom 32576 0 (autoclean) [ide-cd]
cmpci 35432 0 (autoclean)
soundcore 5988 4 (autoclean) [cmpci]
autofs 13300 0 (autoclean) (unused)
eepro100 22260 1
mii 3732 0 [eepro100]
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 15008 1 [iptable_filter]
ohci1394 28776 0 (unused)
ieee1394 60836 0 [ohci1394]
mousedev 5460 1
keybdev 2912 0 (unused)
input 5280 0 [mousedev keybdev]
hid 12344 0 (unused)
usb-uhci 26156 0 (unused)
ehci-hcd 19976 0 (unused)
usb-ohci 21192 0 (unused)
usbcore 75040 1 [hid usb-uhci ehci-hcd usb-ohci]

[7.4.]
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0331 : cmpci Midi
0376-0376 : ide1
0388-038b : cmpci FM
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
9000-901f : VIA Technologies, Inc. USB (#3)
9000-901f : usb-uhci
9400-941f : VIA Technologies, Inc. USB (#2)
9400-941f : usb-uhci
9800-981f : VIA Technologies, Inc. USB
9800-981f : usb-uhci
a000-a00f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus
Master IDE
a000-a007 : ide0
a008-a00f : ide1
a400-a407 : US Robotics/3Com 56K FaxModem Model 5610
a400-a407 : serial(auto)
a800-a83f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
a800-a83f : eepro100
b000-b03f : Promise Technology, Inc. 20265
b000-b007 : ide2
b008-b00f : ide3
b010-b03f : PDC20265
b400-b403 : Promise Technology, Inc. 20265
b800-b807 : Promise Technology, Inc. 20265
d000-d003 : Promise Technology, Inc. 20265
d400-d407 : Promise Technology, Inc. 20265
d800-d8ff : C-Media Electronics Inc CM8738
d800-d8ff : cmpci
[root@test Documentation]# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d17ff : Extension ROM
000f0000-000fffff : System ROM
00100000-5ffebfff : System RAM
00100000-0025c742 : Kernel code
0025c743-002d9a83 : Kernel data
5ffec000-5ffeefff : ACPI Tables
5ffef000-5fffefff : reserved
5ffff000-5fffffff : ACPI Non-volatile Storage
f2000000-f20000ff : NEC Corporation USB 2.0
f2000000-f20000ff : ehci_hcd
f2800000-f2800fff : NEC Corporation USB (#2)
f2800000-f2800fff : usb-ohci
f3000000-f3000fff : NEC Corporation USB
f3000000-f3000fff : usb-ohci
f3800000-f381ffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
f4000000-f4000fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
f4000000-f4000fff : eepro100
f4800000-f4803fff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
f5000000-f50007ff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
f5000000-f50007ff : ohci1394
f5800000-f581ffff : Promise Technology, Inc. 20265
f6000000-f75fffff : PCI Bus #01
f6000000-f6ffffff : nVidia Corporation NV20 [GeForce3 Ti 200]
f7700000-fbffffff : PCI Bus #01
f7800000-f787ffff : nVidia Corporation NV20 [GeForce3 Ti 200]
f8000000-fbffffff : nVidia Corporation NV20 [GeForce3 Ti 200]
fc000000-fdffffff : VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
ffff0000-ffffffff : reserved

[7.5.]
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
Subsystem: Asustek Computer, Inc. A7V266-E
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT333 AGP] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: f6000000-f75fffff
Prefetchable memory behind bridge: f7700000-fbffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev
02) Subsystem: Promise Technology, Inc. Ultra100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b000 [size=64]
Region 5: Memory at f5800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [58] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller
(Link) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f4800000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0c)
Subsystem: Intel Corp. EtherExpress PRO/100 S Desktop Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at a800 [size=64]
Region 2: Memory at f3800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:0f.0 Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev 01)
(prog-if 02 [16550])
Subsystem: US Robotics/3Com USR 56k Internal FAX Modem (Model 2977)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a400 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:10.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Unknown device 1799:0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Unknown device 1799:0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f2800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Unknown device 1799:0002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8500ns max), cache line size 10
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 8052
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
(rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at a000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 9800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 9400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 9000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti200]
(rev a3) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 4057
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at f7800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at f77f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

[7.6.]
none

[7.7.]
none

[X.]
I just #'d CONFIG_SCSI_SIM710=m out of .config

-Zachary A Pfeffer
pfefferz@colorado.edu

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.037 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site