lkml.org 
[lkml]   [2003]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG mm-tree of test2/test3] nforce2-acpi-fixes breaks via ide controller
Benjamin Weber <shawk@gmx.net> wrote:
>
> Hi all
>
> Since the test2-mm1 sources I get the following error during boot:
>
> VP_IDE: IDE controller at PCI slot 0000:00:11.1
> VP_IDE: (ide_setup_pci_device:) Could not enable device.
>
> This results in not being able to use DMA for any devices connected to
> my IDE controller. Hdparm says permission denied when I do a hdparm -d1
> /dev/hda e.g.
>
> I checked with a vanilla kernel and everything is working fine there.
> Going through the broken-out patches from Andrew Morton I found the one
> patch that caused the above behavior: nforce2-acpi-fixes.patch

Thanks for working that out. It must have taken some time.

> I do not know why it should interfere with my via stuff, but it does. A
> vanilla test3 kernel is working fine as well, whereas test3-mm1 shows
> the same error as before with test2-mmX.

Me either. Unfortunately that patch does five different things so we
cannot easily narrow it down further.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.060 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site