lkml.org 
[lkml]   [2003]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: 2.6.0-test3 cannot mount root fs
    From
    Thanks to all of you for the several suggestions, but none was
    successfull till now:

    I tried as boot cmd line:
    s root=03:41 acpi=off
    and still it didn't work. Same problem.

    And I am not using devfs.

    My lilo looks like this:
    boot = /dev/hda2
    install = /boot/boot-bmp.b
    bitmap = /boot/debian-bootscreen-woody.bmp
    bmp-colors=1,,0,2,,0
    bmp-table=120p,173p,1,15,17
    bmp-timer=254p,432p,1,0,0
    read-only
    prompt
    timeout=100
    password=""
    mandatory
    vga=0x317
    ...
    image=/boot/vmlinuz-2.6.0-test3
    label=2.6.0-test3
    append="amd_disconnect=yes"
    read-only
    restricted

    Where amd_disconnect a patch is which sets a bit in the pci register to
    allow the athlon to disconnect during idle, which greatly decreases my
    cpu/mobo temperature. But this is not done till the place were the root
    fs should have been loaded.


    Best wishes

    Norbert

    -------------------------------------------------------------------------------
    Norbert Preining <preining AT logic DOT at> Technische Universität Wien
    gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
    -------------------------------------------------------------------------------
    CLUN (n.)
    A leg which has gone to sleep and has to be hauled around after you.
    --- Douglas Adams, The Meaning of Liff
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:47    [W:0.021 / U:1.952 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site