lkml.org 
[lkml]   [2003]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 2.4.22-pre10] Reorder "Network Device Support" under "Networking Options"
    Date
    Hi Marcelo,

    I've been getting complaints about the menu structure from the linux kernel
    config subsystem for a _long time_. Now let's reorder $subject. We are getting
    close that the menu will look more cleaner :)

    More cleanups for different menu's are following.

    It's the same menu structure like in 2.5/2.6.

    Please apply for 2.4.22-pre10. Thank you :)

    ciao, Marc
    --- a/arch/i386/config.in Thu Sep 26 12:19:14 2002
    +++ b/arch/i386/config.in Thu Sep 26 12:25:37 2002
    @@ -355,6 +355,20 @@
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    source drivers/telephony/Config.in

    mainmenu_option next_comment
    @@ -386,19 +386,6 @@

    source drivers/message/i2o/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi

    source net/ax25/Config.in

    --- a/arch/ppc/config.in 2003-07-31 01:45:38.000000000 +0200
    +++ b/arch/ppc/config.in 2003-07-31 22:31:23.000000000 +0200
    @@ -293,6 +293,20 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    mainmenu_option next_comment
    comment 'ATA/IDE/MFM/RLL support'

    @@ -316,20 +330,6 @@ endmenu

    source drivers/ieee1394/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    source net/ax25/Config.in

    source net/irda/Config.in
    --- a/arch/ppc64/config.in 2003-07-31 01:45:38.000000000 +0200
    +++ b/arch/ppc64/config.in 2003-07-31 22:32:08.000000000 +0200
    @@ -111,6 +111,20 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    mainmenu_option next_comment
    comment 'ATA/IDE/MFM/RLL support'

    @@ -134,20 +148,6 @@ endmenu

    source drivers/ieee1394/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    source net/ax25/Config.in

    mainmenu_option next_comment
    --- a/arch/alpha/config.in 2003-07-31 01:45:30.000000000 +0200
    +++ b/arch/alpha/config.in 2003-07-31 22:33:18.000000000 +0200
    @@ -331,6 +331,20 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    mainmenu_option next_comment
    comment 'ATA/IDE/MFM/RLL support'

    @@ -360,20 +374,6 @@ if [ "$CONFIG_PCI" = "y" ]; then
    source drivers/ieee1394/Config.in
    fi

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    source net/ax25/Config.in

    mainmenu_option next_comment
    --- a/arch/cris/config.in 2003-07-31 01:45:34.000000000 +0200
    +++ b/arch/cris/config.in 2003-07-31 22:34:47.000000000 +0200
    @@ -174,6 +174,20 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    source drivers/telephony/Config.in

    mainmenu_option next_comment
    @@ -203,20 +217,6 @@ source drivers/ieee1394/Config.in

    source drivers/message/i2o/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    source net/ax25/Config.in

    source net/irda/Config.in
    --- a/arch/m68k/config.in 2003-07-31 01:45:36.000000000 +0200
    +++ b/arch/m68k/config.in 2003-07-31 22:36:14.000000000 +0200
    @@ -173,6 +173,93 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    +
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + #
    + # Network device configuration
    + #
    + tristate ' Dummy net driver support' CONFIG_DUMMY
    + tristate ' SLIP (serial line) support' CONFIG_SLIP
    + if [ "$CONFIG_SLIP" != "n" ]; then
    + bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
    + bool ' Keepalive and linefill' CONFIG_SLIP_SMART
    + bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
    + fi
    + tristate 'PPP (point-to-point protocol) support' CONFIG_PPP
    + if [ ! "$CONFIG_PPP" = "n" ]; then
    + dep_bool ' PPP multilink support (EXPERIMENTAL)' CONFIG_PPP_MULTILINK $CONFIG_EXPERIMENTAL
    + dep_bool ' PPP filtering' CONFIG_PPP_FILTER $CONFIG_FILTER
    + dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
    + dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
    + dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
    + dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
    + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    + dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
    + fi
    + fi
    + tristate ' EQL (serial line load balancing) support' CONFIG_EQUALIZER
    + if [ "$CONFIG_ZORRO" = "y" ]; then
    + tristate ' Ariadne support' CONFIG_ARIADNE
    + tristate ' Ariadne II support' CONFIG_ARIADNE2
    + tristate ' A2065 support' CONFIG_A2065
    + tristate ' Hydra support' CONFIG_HYDRA
    + fi
    + if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
    + tristate ' PCMCIA NE2000 support' CONFIG_APNE
    + fi
    + if [ "$CONFIG_APOLLO" = "y" ]; then
    + tristate ' Apollo 3c505 support' CONFIG_APOLLO_ELPLUS
    + fi
    + if [ "$CONFIG_MAC" = "y" ]; then
    + bool ' Macintosh NS 8390 based ethernet cards' CONFIG_MAC8390
    + tristate ' Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)' CONFIG_MACSONIC
    + tristate ' Macintosh SMC 9194 based ethernet cards' CONFIG_SMC9194
    + tristate ' Macintosh CS89x0 based ethernet cards' CONFIG_MAC89x0
    + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    + bool ' Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)' CONFIG_MACMACE
    + fi
    + fi
    + if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
    + tristate ' MVME147 (Lance) Ethernet support' CONFIG_MVME147_NET
    + fi
    + if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
    + tristate ' MVME16x Ethernet support' CONFIG_MVME16x_NET
    + fi
    + if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
    + tristate ' BVME6000 Ethernet support' CONFIG_BVME6000_NET
    + fi
    + if [ "$CONFIG_ATARI" = "y" ]; then
    + tristate ' Atari Lance support' CONFIG_ATARILANCE
    + if [ "$CONFIG_ATARI_ACSI" != "n" ]; then
    + tristate ' BioNet-100 support' CONFIG_ATARI_BIONET
    + tristate ' PAMsNet support' CONFIG_ATARI_PAMSNET
    + fi
    + fi
    + if [ "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
    + tristate ' Sun3/Sun3x on-board LANCE support' CONFIG_SUN3LANCE
    + fi
    + if [ "$CONFIG_SUN3" = "y" ]; then
    + tristate ' Sun3 on-board Intel 82586 support' CONFIG_SUN3_82586
    + fi
    + if [ "$CONFIG_HP300" = "y" ]; then
    + bool ' HP on-board LANCE support' CONFIG_HPLANCE
    + fi
    + if [ "$CONFIG_Q40" = "y" ]; then
    + if [ "$CONFIG_PARPORT" != "n" ]; then
    + dep_tristate ' PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
    + fi
    + dep_tristate 'NE2000/NE1000 support' CONFIG_NE2000 m
    + fi
    + fi
    + endmenu
    +
    +fi
    +
    if [ "$CONFIG_MAC" = "y" ]; then
    source drivers/input/Config.in
    fi
    @@ -288,93 +375,6 @@ if [ "$CONFIG_SCSI" != "n" ]; then
    fi
    endmenu

    -if [ "$CONFIG_NET" = "y" ]; then
    -
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - #
    - # Network device configuration
    - #
    - tristate ' Dummy net driver support' CONFIG_DUMMY
    - tristate ' SLIP (serial line) support' CONFIG_SLIP
    - if [ "$CONFIG_SLIP" != "n" ]; then
    - bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
    - bool ' Keepalive and linefill' CONFIG_SLIP_SMART
    - bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
    - fi
    - tristate 'PPP (point-to-point protocol) support' CONFIG_PPP
    - if [ ! "$CONFIG_PPP" = "n" ]; then
    - dep_bool ' PPP multilink support (EXPERIMENTAL)' CONFIG_PPP_MULTILINK $CONFIG_EXPERIMENTAL
    - dep_bool ' PPP filtering' CONFIG_PPP_FILTER $CONFIG_FILTER
    - dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
    - dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
    - dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
    - dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
    - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    - dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
    - fi
    - fi
    - tristate ' EQL (serial line load balancing) support' CONFIG_EQUALIZER
    - if [ "$CONFIG_ZORRO" = "y" ]; then
    - tristate ' Ariadne support' CONFIG_ARIADNE
    - tristate ' Ariadne II support' CONFIG_ARIADNE2
    - tristate ' A2065 support' CONFIG_A2065
    - tristate ' Hydra support' CONFIG_HYDRA
    - fi
    - if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
    - tristate ' PCMCIA NE2000 support' CONFIG_APNE
    - fi
    - if [ "$CONFIG_APOLLO" = "y" ]; then
    - tristate ' Apollo 3c505 support' CONFIG_APOLLO_ELPLUS
    - fi
    - if [ "$CONFIG_MAC" = "y" ]; then
    - bool ' Macintosh NS 8390 based ethernet cards' CONFIG_MAC8390
    - tristate ' Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)' CONFIG_MACSONIC
    - tristate ' Macintosh SMC 9194 based ethernet cards' CONFIG_SMC9194
    - tristate ' Macintosh CS89x0 based ethernet cards' CONFIG_MAC89x0
    - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    - bool ' Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)' CONFIG_MACMACE
    - fi
    - fi
    - if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
    - tristate ' MVME147 (Lance) Ethernet support' CONFIG_MVME147_NET
    - fi
    - if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
    - tristate ' MVME16x Ethernet support' CONFIG_MVME16x_NET
    - fi
    - if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
    - tristate ' BVME6000 Ethernet support' CONFIG_BVME6000_NET
    - fi
    - if [ "$CONFIG_ATARI" = "y" ]; then
    - tristate ' Atari Lance support' CONFIG_ATARILANCE
    - if [ "$CONFIG_ATARI_ACSI" != "n" ]; then
    - tristate ' BioNet-100 support' CONFIG_ATARI_BIONET
    - tristate ' PAMsNet support' CONFIG_ATARI_PAMSNET
    - fi
    - fi
    - if [ "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
    - tristate ' Sun3/Sun3x on-board LANCE support' CONFIG_SUN3LANCE
    - fi
    - if [ "$CONFIG_SUN3" = "y" ]; then
    - tristate ' Sun3 on-board Intel 82586 support' CONFIG_SUN3_82586
    - fi
    - if [ "$CONFIG_HP300" = "y" ]; then
    - bool ' HP on-board LANCE support' CONFIG_HPLANCE
    - fi
    - if [ "$CONFIG_Q40" = "y" ]; then
    - if [ "$CONFIG_PARPORT" != "n" ]; then
    - dep_tristate ' PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
    - fi
    - dep_tristate 'NE2000/NE1000 support' CONFIG_NE2000 m
    - fi
    - fi
    - endmenu
    -
    -fi
    -
    mainmenu_option next_comment
    comment 'Character devices'

    --- a/arch/mips/config-shared.in 2003-07-31 01:45:37.000000000 +0200
    +++ b/arch/mips/config-shared.in 2003-07-31 22:37:10.000000000 +0200
    @@ -650,6 +650,20 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    source drivers/telephony/Config.in

    mainmenu_option next_comment
    @@ -679,20 +693,6 @@ if [ "$CONFIG_PCI" = "y" ]; then
    source drivers/message/i2o/Config.in
    fi

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    source net/ax25/Config.in

    source net/irda/Config.in
    --- a/arch/parisc/config.in 2003-07-31 01:45:37.000000000 +0200
    +++ b/arch/parisc/config.in 2003-07-31 22:38:27.000000000 +0200
    @@ -103,6 +103,21 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    +
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    if [ "$CONFIG_SUPERIO" = "y" ]; then
    mainmenu_option next_comment
    comment 'ATA/IDE/MFM/RLL support'
    @@ -128,21 +143,6 @@ if [ "$CONFIG_SCSI" != "n" ]; then
    fi
    endmenu

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    -
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    #
    # input before char - char/joystick depends on it. As does USB.
    #
    --- a/arch/s390/config.in 2003-07-31 01:45:39.000000000 +0200
    +++ b/arch/s390/config.in 2003-07-31 22:40:32.000000000 +0200
    @@ -61,12 +61,12 @@ bool 'Pseudo page fault support' CONFIG_
    bool 'VM shared kernel support' CONFIG_SHARED_KERNEL
    endmenu

    -source drivers/s390/Config.in
    -
    if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +source drivers/s390/Config.in
    +
    source fs/Config.in

    mainmenu_option next_comment
    --- a/arch/s390x/config.in 2003-07-31 01:45:39.000000000 +0200
    +++ b/arch/s390x/config.in 2003-07-31 22:40:52.000000000 +0200
    @@ -64,13 +64,12 @@ bool 'Pseudo page fault support' CONFIG_
    bool 'VM shared kernel support' CONFIG_SHARED_KERNEL
    endmenu

    -
    -source drivers/s390/Config.in
    -
    if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +source drivers/s390/Config.in
    +
    source fs/Config.in

    mainmenu_option next_comment
    --- a/arch/sh64/config.in 2003-07-31 01:45:39.000000000 +0200
    +++ b/arch/sh64/config.in 2003-07-31 22:41:34.000000000 +0200
    @@ -165,6 +165,20 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    mainmenu_option next_comment
    comment 'ATA/IDE/MFM/RLL support'

    @@ -191,20 +205,6 @@ endmenu

    # source drivers/ieee1394/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    #
    # input before char - char/joystick depends on it. As does USB.
    #
    --- a/arch/sparc/config.in 2003-07-31 01:45:39.000000000 +0200
    +++ b/arch/sparc/config.in 2003-07-31 22:42:03.000000000 +0200
    @@ -111,6 +111,61 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + tristate ' Dummy net driver support' CONFIG_DUMMY
    + tristate ' Bonding driver support' CONFIG_BONDING
    + tristate ' Universal TUN/TAP device driver support' CONFIG_TUN
    + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    + if [ "$CONFIG_NETLINK" = "y" ]; then
    + tristate ' Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
    + fi
    + fi
    + tristate ' PPP (point-to-point protocol) support' CONFIG_PPP
    + if [ ! "$CONFIG_PPP" = "n" ]; then
    + dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
    + dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
    + dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
    + dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP m
    + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    + dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + dep_tristate ' PPP over ATM (EXPERIMENTAL)' CONFIG_PPPOATM $CONFIG_PPP $CONFIG_ATM
    + fi
    + fi
    + fi
    + tristate ' SLIP (serial line) support' CONFIG_SLIP
    + if [ "$CONFIG_SLIP" != "n" ]; then
    + bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
    + bool ' Keepalive and linefill' CONFIG_SLIP_SMART
    + bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
    + fi
    + tristate ' Sun LANCE support' CONFIG_SUNLANCE
    + tristate ' Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
    + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    + tristate ' Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC
    + fi
    + tristate ' Sun QuadEthernet support' CONFIG_SUNQE
    + tristate ' MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
    + if [ "$CONFIG_PCI" = "y" ]; then
    + tristate '3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX
    + fi
    +
    +# bool ' FDDI driver support' CONFIG_FDDI
    +# if [ "$CONFIG_FDDI" = "y" ]; then
    +# fi
    +
    + if [ "$CONFIG_ATM" != "n" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    # Don't frighten a common SBus user
    if [ "$CONFIG_PCI" = "y" ]; then

    @@ -187,61 +242,6 @@ endmenu

    source drivers/fc4/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - tristate ' Dummy net driver support' CONFIG_DUMMY
    - tristate ' Bonding driver support' CONFIG_BONDING
    - tristate ' Universal TUN/TAP device driver support' CONFIG_TUN
    - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    - if [ "$CONFIG_NETLINK" = "y" ]; then
    - tristate ' Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
    - fi
    - fi
    - tristate ' PPP (point-to-point protocol) support' CONFIG_PPP
    - if [ ! "$CONFIG_PPP" = "n" ]; then
    - dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
    - dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
    - dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
    - dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP m
    - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    - dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - dep_tristate ' PPP over ATM (EXPERIMENTAL)' CONFIG_PPPOATM $CONFIG_PPP $CONFIG_ATM
    - fi
    - fi
    - fi
    - tristate ' SLIP (serial line) support' CONFIG_SLIP
    - if [ "$CONFIG_SLIP" != "n" ]; then
    - bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
    - bool ' Keepalive and linefill' CONFIG_SLIP_SMART
    - bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
    - fi
    - tristate ' Sun LANCE support' CONFIG_SUNLANCE
    - tristate ' Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
    - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    - tristate ' Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC
    - fi
    - tristate ' Sun QuadEthernet support' CONFIG_SUNQE
    - tristate ' MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
    - if [ "$CONFIG_PCI" = "y" ]; then
    - tristate '3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX
    - fi
    -
    -# bool ' FDDI driver support' CONFIG_FDDI
    -# if [ "$CONFIG_FDDI" = "y" ]; then
    -# fi
    -
    - if [ "$CONFIG_ATM" != "n" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    # This one must be before the filesystem configs. -DaveM
    mainmenu_option next_comment
    comment 'Unix98 PTY support'
    --- a/arch/sparc64/config.in 2003-07-31 01:45:39.000000000 +0200
    +++ b/arch/sparc64/config.in 2003-07-31 22:42:26.000000000 +0200
    @@ -119,6 +119,20 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    + source drivers/atm/Config.in
    + fi
    + fi
    + endmenu
    +fi
    +
    mainmenu_option next_comment
    comment 'ATA/IDE/MFM/RLL support'

    @@ -227,20 +241,6 @@ fi

    source drivers/ieee1394/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    - source drivers/atm/Config.in
    - fi
    - fi
    - endmenu
    -fi
    -
    # This one must be before the filesystem configs. -DaveM
    mainmenu_option next_comment
    comment 'Unix 98 PTY support'
    --- a/arch/x86_64/config.in 2003-07-31 01:45:40.000000000 +0200
    +++ b/arch/x86_64/config.in 2003-07-31 22:42:52.000000000 +0200
    @@ -128,6 +128,21 @@ if [ "$CONFIG_NET" = "y" ]; then
    source net/Config.in
    fi

    +if [ "$CONFIG_NET" = "y" ]; then
    + mainmenu_option next_comment
    + comment 'Network device support'
    +
    + bool 'Network device support' CONFIG_NETDEVICES
    + if [ "$CONFIG_NETDEVICES" = "y" ]; then
    + source drivers/net/Config.in
    +# seems to be largely not 64bit safe
    +# if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    +# source drivers/atm/Config.in
    +# fi
    + fi
    + endmenu
    +fi
    +
    source drivers/telephony/Config.in

    mainmenu_option next_comment
    @@ -160,21 +175,6 @@ source drivers/ieee1394/Config.in
    #Currently not 64bit safe
    #source drivers/message/i2o/Config.in

    -if [ "$CONFIG_NET" = "y" ]; then
    - mainmenu_option next_comment
    - comment 'Network device support'
    -
    - bool 'Network device support' CONFIG_NETDEVICES
    - if [ "$CONFIG_NETDEVICES" = "y" ]; then
    - source drivers/net/Config.in
    -# seems to be largely not 64bit safe
    -# if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
    -# source drivers/atm/Config.in
    -# fi
    - fi
    - endmenu
    -fi
    -
    source net/ax25/Config.in

    source net/irda/Config.in
    \
     
     \ /
      Last update: 2005-03-22 13:47    [W:0.079 / U:0.076 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site