lkml.org 
[lkml]   [2003]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Allow initrd_load() before software_resume() (version 2)
[Sorry, new version already... I hadn't noticed that mount_root() is
also called from within initrd_load(). resume() must run before.]


This patch adds a boot parameter "resume_initrd". If present,
init will load the initrd before trying to resume from swsusp.

This makes it posssible to resume from an encrypted suspend image.
The initrd should insmod cryptoloop.o or loop-AES.o and perform
losetup -e so that resume=/dev/loopX makes sense.
Note: software_resume() should not be allowed to complete if
initrd has altered disks (e.g. by flushing journals).


diff -ur linux-2.6.0-test2.orig/Documentation/kernel-parameters.txt linux-2.6.0-test2/Documentation/kernel-parameters.txt
--- linux-2.6.0-test2.orig/Documentation/kernel-parameters.txt 2003-07-27 19:12:45.000000000 +0200
+++ linux-2.6.0-test2/Documentation/kernel-parameters.txt 2003-08-01 11:28:10.000000000 +0200
@@ -816,6 +816,8 @@

resume= [SWSUSP] Specify the partition device for software suspension

+ resume_initrd [SWSUSP] Run initrd before resuming from software suspension
+
riscom8= [HW,SERIAL]
Format: <io_board1>[,<io_board2>[,...<io_boardN>]]

diff -ur linux-2.6.0-test2.orig/init/do_mounts.c linux-2.6.0-test2/init/do_mounts.c
--- linux-2.6.0-test2.orig/init/do_mounts.c 2003-07-27 19:00:37.000000000 +0200
+++ linux-2.6.0-test2/init/do_mounts.c 2003-08-01 11:31:17.000000000 +0200
@@ -15,6 +15,7 @@
extern int get_filesystem_list(char * buf);

int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */
+unsigned char resume_initrd = 0; /* Run initrd before resuming from swsusp */

int root_mountflags = MS_RDONLY | MS_VERBOSE;
char * __initdata root_device_name;
@@ -49,6 +50,13 @@
__setup("ro", readonly);
__setup("rw", readwrite);

+static int __init set_resume_initrd(char *str)
+{
+ resume_initrd = 1;
+ return 1;
+}
+__setup("resume_initrd", set_resume_initrd);
+
static dev_t __init try_name(char *name, int part)
{
char path[64];
@@ -365,9 +373,11 @@

is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;

- /* This has to be before mounting root, because even readonly mount of reiserfs would replay
- log corrupting stuff */
- software_resume();
+ /* software_resume() has to be before mounting root, because even
+ readonly mount of reiserfs would replay log corrupting stuff.
+ However, users may want to run a special initrd first. */
+ if (!resume_initrd)
+ software_resume();

if (initrd_load())
goto out;
diff -ur linux-2.6.0-test2.orig/init/do_mounts.h linux-2.6.0-test2/init/do_mounts.h
--- linux-2.6.0-test2.orig/init/do_mounts.h 2003-07-27 19:04:19.000000000 +0200
+++ linux-2.6.0-test2/init/do_mounts.h 2003-08-01 11:31:41.000000000 +0200
@@ -28,6 +28,7 @@
void mount_root(void);
extern int root_mountflags;
extern char *root_device_name;
+extern unsigned char resume_initrd;

#ifdef CONFIG_DEVFS_FS

diff -ur linux-2.6.0-test2.orig/init/do_mounts_initrd.c linux-2.6.0-test2/init/do_mounts_initrd.c
--- linux-2.6.0-test2.orig/init/do_mounts_initrd.c 2003-07-27 18:57:13.000000000 +0200
+++ linux-2.6.0-test2/init/do_mounts_initrd.c 2003-08-01 11:33:36.000000000 +0200
@@ -6,6 +6,7 @@
#include <linux/romfs_fs.h>
#include <linux/initrd.h>
#include <linux/sched.h>
+#include <linux/suspend.h>

#include "do_mounts.h"

@@ -74,6 +75,10 @@
return;
}

+ /* Must resume from swsusp before mounting a journalling root fs */
+ if (resume_initrd)
+ software_resume();
+
ROOT_DEV = real_root_dev;
mount_root();
\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.082 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site