[lkml]   [2003]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject2.6.0-test2: SATA errors, not usable
I'm testing SATA with 2.6.0-test2 with a Intel P4 i875P chipset. The disk is 
recognised correcly, but right after trying any kind of access (hdparm,
fdisk...) it starts to give the following errors:

ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 18
ide2: BM-DMA at 0xef90-0xef97, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xef98-0xef9f, BIOS settings: hdg:pio, hdh:pio
hde: ST380013AS, ATA DISK drive
hde: max request size: 1024KiB
hde: host protected area => 1
hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(33)
hde: hde1
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=70, high=0, low=70,
end_request: I/O error, dev hde, sector 0
Buffer I/O error on device hde, logical block 0
Buffer I/O error on device hde, logical block 1
Buffer I/O error on device hde, logical block 2

I tried it with 2.4.21 and 2.4.22-pre9 with the same results.
Also changed the BIOS to put in "compatible mode" (as opposite to sata native)
and got the same errors.

In all cases, the disk is unusable (a seagate barracuda 80GB).


ricardo galli GPG id C8114D34

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.066 / U:3.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site