[lkml]   [2003]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.6.0-test2-mm1: Can't mount root
Shawn <> wrote:
> OK, mucho more info (no wonder root=/dev/hde5 no worky):
> VP_IDE: (ide_setup_pci_device:) Could not enable device
> Found out my on board via pci ide was not getting initialized under
> -test2-mm1, so I went looking for driver/ide/pci/via82cxxx in the diffs.
> I found this in the -test2 diff:
> - (((u >> i) & 7) < 8))) {
> + (((u >> i) & 7) < 6))) {
> ...and reversing it did not change anything.
> The only other diff I could think might matter to
> drivers/ide/setup-pci.c
> -static unsigned long __init ide_get_or_set_dma_base (ide_hwif_t *hwif)
> +static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
> ...which does not look like it should kill my via ide...

OK, looks like breakage at the PCI level: pci_enable_device_bars() is
failing; something below pcibios_enable_device().

What was the most recent kernel which works?
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:47    [W:0.083 / U:3.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site