lkml.org 
[lkml]   [2003]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] linux-2.6.0-test2 h8300 archtecure support update (1/6)
config script fix
defconfig update
Makefile update
add H8S archtecture support

--
Yoshinori Sato
<ysato@users.sourceforge.jp>

diff -Nru linux-2.6.0-test2/arch/h8300/Kconfig linux-2.6.0-test2-h8300/arch/h8300/Kconfig
--- linux-2.6.0-test2/arch/h8300/Kconfig 2003-07-14 15:00:22.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/Kconfig 2003-07-28 12:40:08.000000000 +0900
@@ -29,6 +29,9 @@
bool
default n

+config ISA
+ bool
+ default y

source "init/Kconfig"

@@ -67,6 +70,21 @@
More Information.
arch/h8300/Doc/simulator.txt

+config H8S_EDOSK2674
+ bool "EDOSK-2674"
+ help
+ Renesas EDOSK-2674R Evalution Board Support
+ More Information.
+ <http://www.azpower.com/H8-uClinux/index.html>
+ <http://www.eu.renesas.com/tools/edk/support/edosk2674.html>
+
+config H8S_SIM
+ bool "H8S Simulator"
+ help
+ GDB Simulator Support
+ More Information.
+ arch/h8300/Doc/simulator.txt
+
endchoice

choice
@@ -88,6 +106,10 @@
bool "H8/3065,3066,3067,3068,3069"
depends on (H8300H_GENERIC || H8300H_AKI3068NET || H8300H_H8MAX)

+config H8S2678
+ bool "H8S/2670,2673,2674R,2675,2676"
+ depends on (H8S_GENERIC || H8S_EDOSK2674 || H8S_SIM)
+
endchoice

config CPU_H8300H
@@ -95,12 +117,20 @@
depends on (H8300H_GENERIC || H8300H_AKI3068NET || H8300H_H8MAX || H8300H_SIM)
default y

+config CPU_H8S
+ bool
+ depends on (H8S_GENERIC || H8S_EDOSK2674 || H8S_SIM)
+ default y
+
config CPU_CLOCK
int "CPU Clock Frequency (/1KHz)"
default "20000" if H8300H_AKI3068NET
default "25000" if H8300H_H8MAX
default "16000" if H8300H_SIM
default "16000" if H8300H_GENERIC
+ default "33000" if H8S_GENERIC
+ default "33000" if H8S_SIM
+ default "33000" if H8S_EDOSK2674
help
CPU Clock Frequency divide to 1000
choice
@@ -121,15 +151,28 @@
endchoice

config DEFAULT_CMDLINE
- bool
+ bool "Use buildin commandline"
+ default n
help
buildin kernel commandline enabled.

config KERNEL_COMMAND
- string
+ string "Buildin commmand string"
+ depends on DEFAULT_CMDLINE
help
buildin kernel commandline strings.

+config BLKDEV_RESERVE
+ bool "BLKDEV Reserved Memory"
+ default n
+ help
+ Reserved BLKDEV area.
+
+config CONFIG_BLKDEV_RESERVE_ADDRESS
+ hex 'start address'
+ depends on BLKDEV_RESERVE
+ help
+ BLKDEV start address.
endmenu

menu "Executable file formats"
@@ -153,43 +196,6 @@

source "net/Kconfig"

-
-menu "Network device support"
- depends on NET
-
-config NETDEVICES
- bool "Network device support"
- ---help---
- You can say N here if you don't intend to connect your Linux box to
- any other computer at all or if all your connections will be over a
- telephone line with a modem either via UUCP (UUCP is a protocol to
- forward mail and news between unix hosts over telephone lines; read
- the UUCP-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>) or dialing up a shell
- account or a BBS, even using term (term is a program which gives you
- almost full Internet connectivity if you have a regular dial up
- shell account on some Internet connected Unix computer. Read
- <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
- You'll have to say Y if your computer contains a network card that
- you want to use under Linux (make sure you know its name because you
- will be asked for it and read the Ethernet-HOWTO (especially if you
- plan to use more than one network card under Linux)) or if you want
- to use SLIP (Serial Line Internet Protocol is the protocol used to
- send Internet traffic over telephone lines or null modem cables) or
- CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
- and newer replacement for SLIP) or PLIP (Parallel Line Internet
- Protocol is mainly used to create a mini network by connecting the
- parallel ports of two local machines) or AX.25/KISS (protocol for
- sending Internet traffic over amateur radio links).
-
- Make sure to read the NET-3-HOWTO. Eventually, you will have to read
- Olaf Kirch's excellent and free book "Network Administrator's
- Guide", to be found in <http://www.tldp.org/docs.html#guide>. If
- unsure, say Y.
-
-endmenu
-
source "net/ax25/Kconfig"

source "net/irda/Kconfig"
@@ -379,7 +385,7 @@

config GDB_MAGICPRINT
bool "Message Output for GDB MagicPrint service"
- depends on H8300H_SIM
+ depends on (H8300H_SIM || H8S_SIM)
help
kernel messages output useing MagicPrint service from GDB

@@ -390,13 +396,13 @@

config GDB_DEBUG
bool "Use gdb stub"
- depends on !H8300H_SIM
+ depends on (!H8300H_SIM && H8S_SIM)
help
gdb stub exception support

config CONFIG_SH_STANDARD_BIOS
bool "Use gdb protocol serial console"
- depends on !H8300H_SIM
+ depends on (!H8300H_SIM && H8S_SIM)
help
serial console output using GDB protocol.
Require eCos/RedBoot
diff -Nru linux-2.6.0-test2/arch/h8300/defconfig linux-2.6.0-test2-h8300/arch/h8300/defconfig
--- linux-2.6.0-test2/arch/h8300/defconfig 2003-07-14 15:00:22.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/defconfig 2003-07-14 15:17:52.000000000 +0900
@@ -7,6 +7,7 @@
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_ISA=y

#
# Code maturity level options
@@ -20,7 +21,9 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y

#
# Loadable module support
@@ -42,19 +45,76 @@
CONFIG_CPU_CLOCK=16000
# CONFIG_RAMKERNEL is not set
CONFIG_ROMKERNEL=y
+# CONFIG_DEFAULT_CMDLINE is not set

#
# Executable file formats
#
CONFIG_KCORE_AOUT=y
CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_UCLINUX=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set

#
# ATA/IDE/MFM/RLL support
@@ -156,6 +216,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -180,8 +242,8 @@
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_HIGHPROFILE is not set
CONFIG_NO_KERNEL_MSG=y
-# CONFIG_GDB_MAGICPRINT is not set
-# CONFIG_SYSCALL_PRINT is not set
+CONFIG_GDB_MAGICPRINT=y
+CONFIG_SYSCALL_PRINT=y

#
# Security options
diff -Nru linux-2.6.0-test2/arch/h8300/vmlinux.lds.S linux-2.6.0-test2-h8300/arch/h8300/vmlinux.lds.S
--- linux-2.6.0-test2/arch/h8300/vmlinux.lds.S 2003-07-14 15:00:22.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/vmlinux.lds.S 2003-07-28 12:40:08.000000000 +0900
@@ -36,3 +36,143 @@
#endif
#endif

+#ifdef CONFIG_H8S_SIM
+#ifdef CONFIG_ROMKERNEL
+#include "platform/h8s/generic/rom.ld"
+#endif
+#ifdef CONFIG_RAMKERNEL
+#include "platform/h8s/generic/ram.ld"
+#endif
+#endif
+
+#ifdef CONFIG_H8S_EDOSK2674
+#ifdef CONFIG_ROMKERNEL
+#include "platform/h8s/edosk2674/rom.ld"
+#endif
+#ifdef CONFIG_RAMKERNEL
+#include "platform/h8s/edosk2674/ram.ld"
+#endif
+#endif
+
+_jiffies = _jiffies_64 + 4;
+
+SECTIONS
+{
+#if defined(CONFIG_ROMKERNEL)
+ .vectors :
+ {
+ __vector = . ;
+ *(.vectors*)
+ } > vector
+#endif
+#if defined(CONFIG_RAMKERNEL)
+ .bootvec :
+ {
+ *(.bootvec)
+ } > ram
+#endif
+ .text :
+ {
+#if defined(CONFIG_ROMKERNEL)
+ *(.int_redirect)
+#endif
+ __stext = . ;
+ *(.text)
+ . = ALIGN(0x4) ;
+ *(.exit.text)
+ *(.text.*)
+ . = ALIGN(0x4) ;
+ *(.exitcall.exit)
+ . = ALIGN(0x4) ;
+ *(.kstrtab)
+ . = ALIGN(0x4) ;
+ *(.rodata*)
+ . = ALIGN(16); /* Exception table */
+ ___start___ex_table = .;
+ *(__ex_table)
+ ___stop___ex_table = .;
+
+ ___start___ksymtab = .; /* Kernel symbol table */
+ *(__ksymtab)
+ ___stop___ksymtab = .;
+
+ . = ALIGN(0x4) ;
+ __etext = . ;
+#if defined(CONFIG_ROMKERNEL)
+ } > rom
+#endif
+#if defined(CONFIG_RAMKERNEL)
+ } > ram
+#endif
+ .data : AT( ADDR(.text)+SIZEOF(.text))
+ {
+ __sdata = . ;
+ ___data_start = . ;
+
+ . = ALIGN(0x2000) ;
+ *(.data.init_task)
+ . = ALIGN(0x4) ;
+ *(.data)
+ . = ALIGN(0x4) ;
+ *(.data.*)
+
+ . = ALIGN(0x4) ;
+ ___init_begin = .;
+ __sinittext = .;
+ *(.init.text)
+ __einittext = .;
+ *(.init.data)
+ . = ALIGN(0x4) ;
+ ___setup_start = .;
+ *(.init.setup)
+ . = ALIGN(0x4) ;
+ ___setup_end = .;
+ ___start___param = .;
+ *(__param)
+ ___stop___param = .;
+ ___initcall_start = .;
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ ___initcall_end = .;
+ ___con_initcall_start = .;
+ *(.con_initcall.init)
+ ___con_initcall_end = .;
+ . = ALIGN(4);
+ ___initramfs_start = .;
+ *(.init.ramfs)
+ ___initramfs_end = .;
+ . = ALIGN(0x4) ;
+ ___init_end = .;
+ __edata = . ;
+ } > ram
+ __begin_data = LOADADDR(.data) ;
+#if defined(CONFIG_ROMKERNEL)
+ .erom :
+ {
+ __erom = . ;
+ } > erom
+#endif
+ .bss :
+ {
+ . = ALIGN(0x4) ;
+ __sbss = . ;
+ *(.bss*)
+ . = ALIGN(0x4) ;
+ *(COMMON)
+ . = ALIGN(0x4) ;
+ __ebss = . ;
+ __end = . ;
+ __ramstart = .;
+ } > ram
+ .dummy :
+ {
+ COMMAND_START = . - 0x200 ;
+ __ramend = . ;
+ } > eram
+}
+
diff -Nru linux-2.6.0-test2/arch/h8300/Makefile linux-2.6.0-test2-h8300/arch/h8300/Makefile
--- linux-2.6.0-test2/arch/h8300/Makefile 2003-07-28 10:31:02.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/Makefile 2003-07-28 12:40:08.000000000 +0900
@@ -12,33 +12,40 @@
endif

platform-$(CONFIG_CPU_H8300H) := h8300h
+platform-$(CONFIG_CPU_H8S) := h8s
PLATFORM := $(platform-y)

board-$(CONFIG_H8300H_GENERIC) := generic
-board-$(CONFIG_H8300H_AKI3068NET) := ucsimm
-board-$(CONFIG_H8300H_H8MAX) := ucdimm
+board-$(CONFIG_H8300H_AKI3068NET) := aki3068net
+board-$(CONFIG_H8300H_H8MAX) := h8max
board-$(CONFIG_H8300H_SIM) := generic
+board-$(CONFIG_H8S_GENERIC) := generic
+board-$(CONFIG_H8S_EDOSK2674) := edosk2674
+board-$(CONFIG_H8S_SIM) := generic
BOARD := $(board-y)

model-$(CONFIG_RAMKERNEL) := ram
model-$(CONFIG_ROMKERNEL) := rom
MODEL := $(model-y)

-cflags-$(CONFIG_CPU_H8300H) := -mh
+cflags-$(CONFIG_CPU_H8300H) := -mh
ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf
+cflags-$(CONFIG_CPU_H8S) := -ms
+ldflags-$(CONFIG_CPU_H8S) := -mh8300self

CFLAGS += $(cflags-y)
-CFLAGS += -mint32 -fno-builtin
-CFLAGS += -O2 -g
+CFLAGS += -mint32 -fno-builtin -Os
+CFLAGS += -g
CFLAGS += -D__linux__
CFLAGS += -DUTS_SYSNAME=\"uClinux\" -DTARGET=$(BOARD)
AFLAGS += -DPLATFORM=$(PLATFORM) -DTARGET=$(BOARD) -DMODEL=$(MODEL) $(cflags-y)
LDFLAGS += $(ldflags-y)

CROSS_COMPILE = h8300-elf-
-#HEAD := arch/$(ARCH)/platform/$(platform-y)/$(board-y)/crt0_$(model-y).o
LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(CFLAGS) -print-libgcc-file-name)

+head-y := arch/$(ARCH)/platform/$(platform-y)/$(board-y)/crt0_$(model-y).o
+
core-y += arch/$(ARCH)/kernel/ \
arch/$(ARCH)/mm/ \
arch/$(ARCH)/platform/$(PLATFORM)/ \
@@ -58,3 +65,16 @@
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h
$(call filechk,gen-asm-offsets)
+
+vmlinux.bin: vmlinux
+ $(OBJCOPY) -Obinary $< $@
+
+vmlinux.srec: vmlinux
+ $(OBJCOPY) -Osrec $< $@
+
+define archhelp
+ echo 'vmlinux.bin - Create raw binary'
+ echo 'vmlinux.srec - Create srec binary'
+endef
+
+CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.056 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site