lkml.org 
[lkml]   [2003]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] compile fix for MPT Fusion driver for 2.5.70 bk
A different approach is the patch below that simply removes 
compatibility for kernels < 2.4.4 from
drivers/message/fusion/linux_compat.h (plus expands some macros).

It compiles against 2.5.70-mm5.

cu
Adrian

--- linux-2.5.70-mm5/drivers/message/fusion/linux_compat.h.old 2003-06-06 19:02:59.000000000 +0200
+++ linux-2.5.70-mm5/drivers/message/fusion/linux_compat.h 2003-06-06 19:17:16.000000000 +0200
@@ -11,128 +11,6 @@

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

-#ifndef rwlock_init
-#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
-#define SET_NICE(current,x) do {(current)->nice = (x);} while (0)
-#else
-#define SET_NICE(current,x)
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)
-#define pci_enable_device(pdev) (0)
-#define SCSI_DATA_UNKNOWN 0
-#define SCSI_DATA_WRITE 1
-#define SCSI_DATA_READ 2
-#define SCSI_DATA_NONE 3
-#endif
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,4)
-#define pci_set_dma_mask(pdev, mask) (0)
-#define scsi_set_pci_device(sh, pdev) (0)
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)
-# if LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)
- typedef unsigned int dma_addr_t;
-# endif
-#else
-# if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)
- typedef unsigned int dma_addr_t;
-# endif
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)
-/*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-/* This block snipped from lk-2.2.18/include/linux/init.h { */
-/*
- * Used for initialization calls..
- */
-typedef int (*initcall_t)(void);
-typedef void (*exitcall_t)(void);
-
-#define __init_call __attribute__ ((unused,__section__ (".initcall.init")))
-#define __exit_call __attribute__ ((unused,__section__ (".exitcall.exit")))
-
-extern initcall_t __initcall_start, __initcall_end;
-
-#define __initcall(fn) \
- static initcall_t __initcall_##fn __init_call = fn
-#define __exitcall(fn) \
- static exitcall_t __exitcall_##fn __exit_call = fn
-
-#ifdef MODULE
-/* These macros create a dummy inline: gcc 2.9x does not count alias
- as usage, hence the `unused function' warning when __init functions
- are declared static. We use the dummy __*_module_inline functions
- both to kill the warning and check the type of the init/cleanup
- function. */
-typedef int (*__init_module_func_t)(void);
-typedef void (*__cleanup_module_func_t)(void);
-#define module_init(x) \
- int init_module(void) __attribute__((alias(#x))); \
- static inline __init_module_func_t __init_module_inline(void) \
- { return x; }
-#define module_exit(x) \
- void cleanup_module(void) __attribute__((alias(#x))); \
- static inline __cleanup_module_func_t __cleanup_module_inline(void) \
- { return x; }
-
-#else
-#define module_init(x) __initcall(x);
-#define module_exit(x) __exitcall(x);
-#endif
-/* } block snipped from lk-2.2.18/include/linux/init.h */
-
-/* This block snipped from lk-2.2.18/include/linux/sched.h { */
-/*
- * Used prior to schedule_timeout calls..
- */
-#define __set_current_state(state_value) do { current->state = state_value; } while (0)
-#ifdef __SMP__
-#define set_current_state(state_value) do { __set_current_state(state_value); mb(); } while (0)
-#else
-#define set_current_state(state_value) __set_current_state(state_value)
-#endif
-/* } block snipped from lk-2.2.18/include/linux/sched.h */
-
-/* procfs compat stuff... */
-#define proc_mkdir(x,y) create_proc_entry(x, S_IFDIR, y)
-
-/* MUTEX compat stuff... */
-#define DECLARE_MUTEX(name) struct semaphore name=MUTEX
-#define DECLARE_MUTEX_LOCKED(name) struct semaphore name=MUTEX_LOCKED
-#define init_MUTEX(x) *(x)=MUTEX
-#define init_MUTEX_LOCKED(x) *(x)=MUTEX_LOCKED
-
-/* Wait queues. */
-#define DECLARE_WAIT_QUEUE_HEAD(name) \
- struct wait_queue * (name) = NULL
-#define DECLARE_WAITQUEUE(name, task) \
- struct wait_queue (name) = { (task), NULL }
-
-#if defined(__sparc__) && defined(__sparc_v9__)
-/* The sparc64 ioremap implementation is wrong in 2.2.x,
- * but fixing it would break all of the drivers which
- * workaround it. Fixed in 2.3.x onward. -DaveM
- */
-#define ARCH_IOREMAP(base) ((unsigned long) (base))
-#else
-#define ARCH_IOREMAP(base) ioremap(base)
-#endif
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#else /* LINUX_VERSION_CODE must be >= KERNEL_VERSION(2,2,18) */
-
-/* No ioremap bugs in >2.3.x kernels. */
-#define ARCH_IOREMAP(base) ioremap(base)
-
-/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18) */


/*
@@ -145,91 +23,6 @@
#define MODULE_LICENSE(license)
#endif

-
-/* PCI/driver subsystem { */
-#ifndef pci_for_each_dev
-#define pci_for_each_dev(dev) for((dev)=pci_devices; (dev)!=NULL; (dev)=(dev)->next)
-#define pci_peek_next_dev(dev) ((dev)->next ? (dev)->next : NULL)
-#define DEVICE_COUNT_RESOURCE 6
-#define PCI_BASEADDR_FLAGS(idx) base_address[idx]
-#define PCI_BASEADDR_START(idx) base_address[idx] & ~0xFUL
-/*
- * We have to keep track of the original value using
- * a temporary, and not by just sticking pdev->base_address[x]
- * back. pdev->base_address[x] is an opaque cookie that can
- * be used by the PCI implementation on a given Linux port
- * for any purpose. -DaveM
- */
-#define PCI_BASEADDR_SIZE(__pdev, __idx) \
-({ unsigned int size, tmp; \
- pci_read_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), &tmp); \
- pci_write_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), 0xffffffff); \
- pci_read_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), &size); \
- pci_write_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), tmp); \
- (4 - size); \
-})
-#else
-#define pci_peek_next_dev(dev) ((dev) != pci_dev_g(&pci_devices) ? pci_dev_g((dev)->global_list.next) : NULL)
-#define PCI_BASEADDR_FLAGS(idx) resource[idx].flags
-#define PCI_BASEADDR_START(idx) resource[idx].start
-#define PCI_BASEADDR_SIZE(dev,idx) (dev)->resource[idx].end - (dev)->resource[idx].start + 1
-#endif /* } ifndef pci_for_each_dev */
-
-
-/* Compatability for the 2.3.x PCI DMA API. */
-#ifndef PCI_DMA_BIDIRECTIONAL
-/*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-#define PCI_DMA_BIDIRECTIONAL 0
-#define PCI_DMA_TODEVICE 1
-#define PCI_DMA_FROMDEVICE 2
-#define PCI_DMA_NONE 3
-
-#ifdef __KERNEL__
-#include <asm/page.h>
-/* Pure 2^n version of get_order */
-static __inline__ int __get_order(unsigned long size)
-{
- int order;
-
- size = (size-1) >> (PAGE_SHIFT-1);
- order = -1;
- do {
- size >>= 1;
- order++;
- } while (size);
- return order;
-}
-#endif
-
-#define pci_alloc_consistent(hwdev, size, dma_handle) \
-({ void *__ret = (void *)__get_free_pages(GFP_ATOMIC, __get_order(size)); \
- if (__ret != NULL) { \
- memset(__ret, 0, size); \
- *(dma_handle) = virt_to_bus(__ret); \
- } \
- __ret; \
-})
-
-#define pci_free_consistent(hwdev, size, vaddr, dma_handle) \
- free_pages((unsigned long)vaddr, __get_order(size))
-
-#define pci_map_single(hwdev, ptr, size, direction) \
- virt_to_bus(ptr);
-
-#define pci_unmap_single(hwdev, dma_addr, size, direction) \
- do { /* Nothing to do */ } while (0)
-
-#define pci_map_sg(hwdev, sg, nents, direction) (nents)
-#define pci_unmap_sg(hwdev, sg, nents, direction) \
- do { /* Nothing to do */ } while(0)
-
-#define sg_dma_address(sg) (virt_to_bus((sg)->address))
-#define sg_dma_len(sg) ((sg)->length)
-
-/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#endif /* PCI_DMA_BIDIRECTIONAL */
-
/*
* With the new command queuing code in the SCSI mid-layer we no longer have
* to hold the io_request_lock spin lock when calling the scsi_done routine.
--- linux-2.5.70-mm5/drivers/message/fusion/mptbase.c.old 2003-06-06 19:09:38.000000000 +0200
+++ linux-2.5.70-mm5/drivers/message/fusion/mptbase.c 2003-06-06 19:15:02.000000000 +0200
@@ -1184,7 +1184,7 @@
* Do some kind of look ahead here...
*/
if (pdev->devfn & 1) {
- pdev2 = pci_peek_next_dev(pdev);
+ pdev2 = (pdev) != pci_dev_g(&pci_devices) ? pci_dev_g((pdev)->global_list.next) : NULL;
if (pdev2 && (pdev2->vendor == 0x1000) &&
(PCI_SLOT(pdev2->devfn) == PCI_SLOT(pdev->devfn)) &&
(pdev2->device == pdev->device) &&
@@ -1343,14 +1343,14 @@
mem_phys = msize = 0;
port = psize = 0;
for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
- if (pdev->PCI_BASEADDR_FLAGS(ii) & PCI_BASE_ADDRESS_SPACE_IO) {
+ if (pdev->resource[ii].flags & PCI_BASE_ADDRESS_SPACE_IO) {
/* Get I/O space! */
- port = pdev->PCI_BASEADDR_START(ii);
- psize = PCI_BASEADDR_SIZE(pdev,ii);
+ port = pdev->resource[ii].start;
+ psize = (pdev)->resource[ii].end - (pdev)->resource[ii].start + 1;
} else {
/* Get memmap */
- mem_phys = pdev->PCI_BASEADDR_START(ii);
- msize = PCI_BASEADDR_SIZE(pdev,ii);
+ mem_phys = pdev->resource[ii].start;
+ msize = (pdev)->resource[ii].end - (pdev)->resource[ii].start + 1;
break;
}
}
--- linux-2.5.70-mm5/drivers/message/fusion/mptctl.c.old 2003-06-06 19:11:56.000000000 +0200
+++ linux-2.5.70-mm5/drivers/message/fusion/mptctl.c 2003-06-06 19:12:31.000000000 +0200
@@ -2525,7 +2525,7 @@
break;
}

- karg.base_io_addr = pdev->PCI_BASEADDR_START(0);
+ karg.base_io_addr = pdev->resource[0].start;

if ((int)ioc->chip_type <= (int) FC929)
karg.bus_phys_width = HP_BUS_WIDTH_UNK;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.113 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site