lkml.org 
[lkml]   [2003]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPROBLEM: Kernel Bug Report
1.  Linux system hangs when being shared Helios directory is accessed my 
Macintosh client

2. This is exactly what I am doing. I have installed Helios Ethershare
on my linux box. I am using an iMac (MacOS 9.22) to access the shared
directories. This all works fine up until a certain point.

I put in an HFS disc into the local drive on my linux box. I mount this
as an HFS disc by doing: "mount -t hfs /dev/hdc /mount_pt_1"

I am then NFS mounting that directory to another directory on the same
box. "mount -t nfs localhost:/mount_pt_1 /mount_pt_2". This works fine
and can view the contents of the disc over the two mount points perfectly.

The /mount_pt_2 directory is the shared directory from
Helios Ethershare and will be allowed readonly access by the iMac. I go
to the Chooser on the iMac and open up this directory and it just hangs.
I go back over to the linux box and I can not access that directory
anymore. It is hung and have to quit out of my shell. I can no longer
umount any of my mounted directories. I have to reboot.

3. Keywords: NFS, HFS, Helios, Ethershare

4. I tried this on Kernel Version: 2.4.7-10 and also on 2.4.21. The same
thing happened on both of them.

5. OOPS:
Jun 26 18:38:21 linux2 rebuild[1216]: starting rebuild in /root
Jun 26 18:38:21 linux2 rebuild[1216]: stat /root/.netscape/lock: No such
file or directory
Jun 26 18:38:23 linux2 rebuild[1216]: rebuild done in /root
Jun 26 18:38:26 linux2 kernel: hfs_cat_put: trying to free free entry:
c7d2b200
Jun 26 18:38:32 linux2 last message repeated 12 times
Jun 26 18:38:32 linux2 kernel: hfs_cat_put: trying to free free entry:
c3f38200
Jun 26 18:38:32 linux2 kernel: hfs_cat_put: trying to free free entry:
c3f38200
Jun 26 18:38:32 linux2 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000070
Jun 26 18:38:32 linux2 kernel: printing eip:
Jun 26 18:38:32 linux2 kernel: c88a04c8
Jun 26 18:38:32 linux2 kernel: *pde = 00000000
Jun 26 18:38:32 linux2 kernel: Oops: 0000
Jun 26 18:38:32 linux2 kernel: CPU: 0
Jun 26 18:38:32 linux2 kernel: EIP: 0010:[<c88a04c8>] Not tainted
Jun 26 18:38:32 linux2 kernel: EFLAGS: 00010202
Jun 26 18:38:32 linux2 kernel: eax: c61dbe70 ebx: c3f38200 ecx:
00000000 edx: c88ab488
Jun 26 18:38:32 linux2 kernel: esi: c61dbe96 edi: c3f38256 ebp:
00000000 esp: c61dbd34
Jun 26 18:38:32 linux2 kernel: ds: 0018 es: 0018 ss: 0018
Jun 26 18:38:32 linux2 kernel: Process nfsd (pid: 1209,
stackpage=c61db000)
Jun 26 18:38:32 linux2 kernel: Stack: c61dbe70 00000011 00000000 c61dbe70
00000000 c3db6260 c0346a80 000002e2
Jun 26 18:38:32 linux2 kernel: 00000000 c3f3820c c01cb1da 00000006
c033f740 c03ba8a8 00002208 00002239
Jun 26 18:38:32 linux2 kernel: 000ca82e c02bc39a 00000018 c03b867f
00000006 c0116eeb c033f740 c03ba8a8
Jun 26 18:38:32 linux2 kernel: Call Trace: [vt_console_print+122/760]
[vsnprintf+1146/1228] [__call_console_drivers+59/76]
[_call_console_drivers+83/88] [release_console_sem+146/152]
Jun 26 18:38:32 linux2 kernel: [<c88a034a>] [<c88a06a8>] [<c88a0bc1>]
[<c88a2885>] [sys_select+1142/1448] [lookup_hash+157/224]
Jun 26 18:38:32 linux2 kernel: [lookup_one_len+87/108]
[nfsd_lookup+832/1192] [nfssvc_decode_diropargs+93/196]
[nfsd_proc_lookup+141/160] [nfsd_dispatch+211/410] [svc_process+700/1374]
Jun 26 18:38:32 linux2 kernel: [nfsd+433/872] [arch_kernel_thread+35/48]
Jun 26 18:38:32 linux2 kernel:
Jun 26 18:38:32 linux2 kernel: Code: 8b 6d 70 89 ee 89 6c 24 1c 56 8d 44
24 34 89 c6 89 44 24 24
Jun 26 18:39:55 linux2 kernel: <5>nfs: server localhost not responding,
still trying
Jun 26 18:41:57 linux2 inetd[498]: auth/tcp: bind: Address already in use
Jun 26 18:42:23 linux2 PAM_pwdb[1221]: (login) session opened for user
rjw-engr by (uid=0)
Jun 26 18:42:26 linux2 PAM_pwdb[1258]: (su) session opened for user root
by rjw-engr(uid=4033)


6. Do not have a shell script to reproduce environment.

7. ENVIRONMENT
7.1 Didn't have access to the ver_linux script
7.2
[root@linux2 /root]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 698.668
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1392.64

7.3
[root@linux2 /root]# cat /proc/modules
hfs 76656 1 (autoclean)
appletalk 23376 11

7.4
[root@linux2 /root]# cat /proc/ioports ; cat /proc/iomem
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0400-040f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
0cf8-0cff : PCI conf1
6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
8000-9fff : PCI Bus #01
9800-98ff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X
d000-d0ff : Adaptec AHA-2940U2/U2W
d400-d43f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
d400-d43f : eepro100
d800-d803 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
dc00-dcff : Adaptec AIC-7892B U160/m
ffa0-ffaf : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d6000-000d7fff : Extension ROM
000f0000-000fffff : System ROM
00100000-07feffff : System RAM
00100000-002bf7b3 : Kernel code
002bf7b4-00378e1f : Kernel data
07ff0000-07ff7fff : ACPI Tables
07ff8000-07ffffff : ACPI Non-volatile Storage
dd800000-dd8fffff : PCI Bus #01
e0000000-e7ffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
ed9ff000-ed9fffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
eda00000-efafffff : PCI Bus #01
ee000000-eeffffff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X
efaff000-efafffff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X
efe00000-efefffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
efffd000-efffdfff : Adaptec AHA-2940U2/U2W
efffd000-efffdfff : aic7xxx
efffe000-efffefff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
efffe000-efffefff : eepro100
effff000-efffffff : Adaptec AIC-7892B U160/m
effff000-efffffff : aic7xxx
ffff0000-ffffffff : reserved

7.5
lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate]
System Controller (rev 25)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64 set
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ed9ff000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at d800 [disabled] [size=4]
Capabilities: [a0] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00008000-00009fff
Memory behind bridge: eda00000-efafffff
Prefetchable memory behind bridge: dd800000-dd8fffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:03.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management
Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 64 set, cache line size 08

Interrupt: pin A routed to IRQ 9
Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d400 [size=64]
Region 2: Memory at efe00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at efd00000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:04.0 SCSI storage controller: Adaptec 7892B (rev 02)
Subsystem: Adaptec: Unknown device 62a1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 40 min, 25 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 10
BIST result: 00
Region 0: I/O ports at dc00 [disabled] [size=256]
Region 1: Memory at effff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at effc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev
1b)
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set
Region 4: I/O ports at ffa0 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
20)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W
Subsystem: Adaptec: Unknown device a180
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 39 min, 25 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 11
BIST result: 00
Region 0: I/O ports at d000 [disabled] [size=256]
Region 1: Memory at efffd000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at effa0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:05.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0084
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 9800 [size=256]
Region 2: Memory at efaff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at efac0000 [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

7.6
[root@linux2 /root]# cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: DNES-309170 Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02


7.7 OTHER INFORMATION: Kernel 2.4.21 was downloaded and compiled and
installed. I added now patches to it whatsoever. This is a fairly simple
problem to reproduce I feel. The only difficulty will be getting Helios
Ethershare software if you do not have it.

We are using Ethershare Version 2.6, CD-17.

Please let me know if you need any other information.

--
Ryan White
Software Engineer

Luminex Software, Inc.
6840 Indiana Avenue, Suite 130
Riverside, CA 92506
909.781.4100 x159
rwhite@luminex.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.055 / U:0.192 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site