lkml.org 
[lkml]   [2003]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: siimage driver
Andre Hedrick wrote:

>Until the device ordering can be sorted out, your pain will be the
>following:
>
>ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15
>
>Cheers,
>
>Andre Hedrick
>LAD Storage Consulting Group
>
>On Thu, 12 Jun 2003, John T Copeland wrote:
>
>
>
>>Alan,
>>A couple of questions if you please.
>>
>>1) When I compile the siimage driver into the kernel, the ide buses are
>>scanned in the following order:
>> IDE0 - SATA primary - hda, hdb
>> IDE1 - SATA secondary - hdc, hdd
>> IDE2 - ATA tertiary - hde, hdf
>> IDE3 - ATA quandrary hdg, hdh
>>I want the ATA to be IDE0/1 and SATA to be IDE2/3. I have noticed from
>>some of the posts about the siimage driver on the ASUS nforce2 mobo this
>>is the apparent order scanned. My mobo is an Abit NF7-S nforce2. Is
>>there someway of controlling the order of scannin the IDE buses? I
>>tried append="ide=reverse" to no avail.
>>
>>2) To try and get the nforce2 IDE buses scanned first, I compiled
>>siimage as a module, but when I did an "insmod siimage" I get an
>>unresolved external, "noautodma", in siimage.
>>
>>I'd appreciate any help you can offer.
>>
>>Thanks,
>>John Copeland
>>
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>the body of a message to majordomo@vger.kernel.org
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>>
>>
>>
>
>
>
>
Thanks Andre, that gets the job done.
JohnC

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.029 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site