lkml.org 
[lkml]   [2003]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: siimage driver

Until the device ordering can be sorted out, your pain will be the
following:

ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15

Cheers,

Andre Hedrick
LAD Storage Consulting Group

On Thu, 12 Jun 2003, John T Copeland wrote:

> Alan,
> A couple of questions if you please.
>
> 1) When I compile the siimage driver into the kernel, the ide buses are
> scanned in the following order:
> IDE0 - SATA primary - hda, hdb
> IDE1 - SATA secondary - hdc, hdd
> IDE2 - ATA tertiary - hde, hdf
> IDE3 - ATA quandrary hdg, hdh
> I want the ATA to be IDE0/1 and SATA to be IDE2/3. I have noticed from
> some of the posts about the siimage driver on the ASUS nforce2 mobo this
> is the apparent order scanned. My mobo is an Abit NF7-S nforce2. Is
> there someway of controlling the order of scannin the IDE buses? I
> tried append="ide=reverse" to no avail.
>
> 2) To try and get the nforce2 IDE buses scanned first, I compiled
> siimage as a module, but when I did an "insmod siimage" I get an
> unresolved external, "noautodma", in siimage.
>
> I'd appreciate any help you can offer.
>
> Thanks,
> John Copeland
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.041 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site