Messages in this thread |  | | Date | Tue, 10 Jun 2003 14:51:53 +0200 | From | Arnout Engelen <> | Subject | PROBLEM: kernel oops in 2.4.20 |
| |
[1.] a kernel oops occured. [2.] First my X terminal (tektronix) stopped working, then when I pinged the machine:
arnouten@setzer:~$ ping mintzer PING mintzer.bzzt.net (195.169.216.157) 56(84) bytes of data. 64 bytes from vhe-400091.sshn.net (195.169.216.157): icmp_seq=1 ttl=64 time=0.192 ms 64 bytes from 195.169.216.157: icmp_seq=2 ttl=64 time=0.135 ms WARNING: failed to install socket filter : Protocol not available From setzer (172.16.3.2) icmp_seq=38 Destination Host Unreachable
Information below was taken after the reboot directly after the crash. Oops.file was copy-pasted from /var/log/messages. I hope it means more to you than it does to me :) I only used USAGI, no other patches applied.
[3.] kernel oops. [4.] Linux version 2.4.20usagi-s20030414 (root@mintzer) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Fri Apr 25 13:47:03 CEST 2003 [5.]
Jun 10 13:33:40 mintzer kernel: c01069c5 Jun 10 13:33:40 mintzer kernel: Oops: 0000 Jun 10 13:33:40 mintzer kernel: CPU: 0 Jun 10 13:33:40 mintzer kernel: EIP: 0010:[<c01069c5>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 Jun 10 13:33:40 mintzer kernel: EFLAGS: 00210286 Jun 10 13:33:40 mintzer kernel: eax: c89b5f5e ebx: c89b4000 ecx: c0a9d000 edx: 00000000 Jun 10 13:33:40 mintzer kernel: esi: 00000000 edi: 00000000 ebp: c89b5fc4 esp: c89b5f28 Jun 10 13:33:40 mintzer kernel: ds: 0018 es: 0018 ss: 0018 Jun 10 13:33:40 mintzer kernel: Process ntpd (pid: 430, stackpage=c89b5000) Jun 10 13:33:40 mintzer kernel: Stack: c89b4000 00000000 00000000 bffffdac c8a32f40 00000000 c013bd68 c89b5f6c Jun 10 13:33:40 mintzer kernel: 00000004 00000001 c0a9ddd8 00000304 00000080 c89b4000 00200286 00000004 Jun 10 13:33:40 mintzer kernel: 00000001 c0a9ddd8 fffffdfe c013bdaa c0a9ddc0 c013c20f c0a9ddc0 00000004 Jun 10 13:33:40 mintzer kernel: Call Trace: [<c013bd68>] [<c013bdaa>] [<c013c20f>] [<c0106d3c>] Jun 10 13:33:40 mintzer kernel: Code: 03 83 f8 03 74 0a b8 01 00 00 00 e9 23 02 00 00 83 7c 24 14
>>EIP; c01069c5 <do_signal+15/260> <=====
>>eax; c89b5f5e <_end+86c97d6/105e2878> >>ebx; c89b4000 <_end+86c7878/105e2878> >>ecx; c0a9d000 <_end+7b0878/105e2878> >>ebp; c89b5fc4 <_end+86c983c/105e2878> >>esp; c89b5f28 <_end+86c97a0/105e2878>
Trace; c013bd68 <do_select+1c8/1e0> Trace; c013bdaa <select_bits_free+a/10> Trace; c013c20f <sys_select+45f/470> Trace; c0106d3c <signal_return+14/18>
Code; c01069c5 <do_signal+15/260> 00000000 <_EIP>: Code; c01069c5 <do_signal+15/260> <===== 0: 03 83 f8 03 74 0a add 0xa7403f8(%ebx),%eax <===== Code; c01069cb <do_signal+1b/260> 6: b8 01 00 00 00 mov $0x1,%eax Code; c01069d0 <do_signal+20/260> b: e9 23 02 00 00 jmp 233 <_EIP+0x233> c0106bf8 <do_signal+248/260> Code; c01069d5 <do_signal+25/260> 10: 83 7c 24 14 00 cmpl $0x0,0x14(%esp,1)
[6.] unknown, it only occured once until now.
[7.1.] Linux mintzer 2.4.20usagi-s20030414 #1 Fri Apr 25 13:47:03 CEST 2003 i686 unknown Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.15 e2fsprogs 1.27 reiserfsprogs 3.x.1b Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded snd-pcm-oss snd-pcm-plugin ipt_state iptable_mangle iptable_nat iptable_filter 3c59x snd-mixer-oss snd-card-via686a snd-pcm snd-timer snd-ac97-codec snd-mixer snd-mpu401-uart snd-rawmidi snd-seq-device snd ide-scsi scsi_mod
[7.2.] processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 7 model name : AMD Duron(tm) processor stepping : 0 cpu MHz : 999.561 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 1992.29
[7.3.] snd-pcm-oss 18560 1 (autoclean) snd-pcm-plugin 14864 0 (autoclean) [snd-pcm-oss] ipt_state 608 2 (autoclean) iptable_mangle 2304 0 (autoclean) (unused) iptable_nat 14644 1 (autoclean) iptable_filter 1760 1 (autoclean) 3c59x 25320 2 snd-mixer-oss 4992 0 (autoclean) [snd-pcm-oss] snd-card-via686a 6912 1 (autoclean) snd-pcm 30720 0 (autoclean) [snd-pcm-oss snd-pcm-plugin snd-card-via686a] snd-timer 9024 0 (autoclean) [snd-pcm] snd-ac97-codec 23584 0 (autoclean) [snd-card-via686a] snd-mixer 27592 0 (autoclean) [snd-mixer-oss snd-ac97-codec] snd-mpu401-uart 2336 0 (autoclean) [snd-card-via686a] snd-rawmidi 10272 0 (autoclean) [snd-mpu401-uart] snd-seq-device 3820 0 (autoclean) [snd-rawmidi] snd 33152 1 (autoclean) [snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-card-via686a snd-pcm snd-timer snd-ac97-codec snd-mixer snd-mpu401-uart snd-rawmidi snd-seq-device] ide-scsi 7776 0 scsi_mod 83576 1 [ide-scsi]
[7.4.] 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(set) 0300-0301 : VIA 82C686A - MPU401 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(set) 0cf8-0cff : PCI conf1 5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] c000-c00f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE 00-c007 : ide0 c008-c00f : ide1 c400-c41f : VIA Technologies, Inc. USB c800-c81f : VIA Technologies, Inc. USB (#2) cc00-ccff : VIA Technologies, Inc. VT82C686 AC97 Audio Controller cc00-ccff : VIA 82C686A - AC'97 d000-d003 : VIA Technologies, Inc. VT82C686 AC97 Audio Controller d400-d403 : VIA Technologies, Inc. VT82C686 AC97 Audio Controller d400-d403 : VIA 82C686A - MPU401 config dc00-dc7f : 3Com Corporation 3c905C-TX/TX-M [Tornado] dc00-dc7f : 00:09.0 e000-e07f : 3Com Corporation 3c905C-TX/TX-M [Tornado] (#2) e000-e07f : 00:0a.0
00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c8000-000c87ff : Extension ROM 000c9000-000c97ff : Extension ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-002387c4 : Kernel code 002387c5-002ac6c3 : Kernel data 0fff0000-0fff2fff : ACPI Non-volatile Storage 0fff3000-0fffffff : ACPI Tables d0000000-d3ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133] d5000000-d57fffff : S3 Inc. 86c764/765 [Trio32/64/64V+] d5800000-d580007f : 3Com Corporation 3c905C-TX/TX-M [Tornado] d5801000-d580107f : 3Com Corporation 3c905C-TX/TX-M [Tornado] (#2) ffff0000-ffffffff : reserved
[7.5.]
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at c000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1a) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at c400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1a) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at c800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50) Subsystem: Micro-star International Co Ltd: Unknown device 3300 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 11 Region 0: I/O ports at cc00 [size=256] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at d400 [size=4] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 12 Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K]
00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at dc00 [size=128] Region 1: Memory at d5800000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e000 [size=128] Region 1: Memory at d5801000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[7.6.] (though I don't have scsi physically)
Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: LITE-ON Model: LTR-52246S Rev: 6S0D Type: CD-ROM ANSI SCSI revision: 02
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |