lkml.org 
[lkml]   [2003]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] Yet more PCI fixes for 2.5.70
From
Date
ChangeSet 1.1337, 2003/06/09 15:48:21-07:00, greg@kroah.com

PCI: remove pci_present() from drivers/net/dgrs.c


drivers/net/dgrs.c | 80 +++++++++++++++++++++++++----------------------------
1 files changed, 38 insertions(+), 42 deletions(-)


diff -Nru a/drivers/net/dgrs.c b/drivers/net/dgrs.c
--- a/drivers/net/dgrs.c Tue Jun 10 11:21:04 2003
+++ b/drivers/net/dgrs.c Tue Jun 10 11:21:04 2003
@@ -1356,55 +1356,51 @@
uint irq;
uint plxreg;
uint plxdma;
+ struct pci_dev *pdev = NULL;

/*
* First, check for PCI boards
*/
- if (pci_present())
+ while ((pdev = pci_find_device(SE6_PCI_VENDOR_ID, SE6_PCI_DEVICE_ID, pdev)) != NULL)
{
- struct pci_dev *pdev = NULL;
+ /*
+ * Get and check the bus-master and latency values.
+ * Some PCI BIOSes fail to set the master-enable bit,
+ * and the latency timer must be set to the maximum
+ * value to avoid data corruption that occurs when the
+ * timer expires during a transfer. Yes, it's a bug.
+ */
+ if (pci_enable_device(pdev))
+ continue;
+ pci_set_master(pdev);
+
+ plxreg = pci_resource_start (pdev, 0);
+ io = pci_resource_start (pdev, 1);
+ mem = pci_resource_start (pdev, 2);
+ pci_read_config_dword(pdev, 0x30, &plxdma);
+ irq = pdev->irq;
+ plxdma &= ~15;
+
+ /*
+ * On some BIOSES, the PLX "expansion rom" (used for DMA)
+ * address comes up as "0". This is probably because
+ * the BIOS doesn't see a valid 55 AA ROM signature at
+ * the "ROM" start and zeroes the address. To get
+ * around this problem the SE-6 is configured to ask
+ * for 4 MB of space for the dual port memory. We then
+ * must set its range back to 2 MB, and use the upper
+ * half for DMA register access
+ */
+ OUTL(io + PLX_SPACE0_RANGE, 0xFFE00000L);
+ if (plxdma == 0)
+ plxdma = mem + (2048L * 1024L);
+ pci_write_config_dword(pdev, 0x30, plxdma + 1);
+ pci_read_config_dword(pdev, 0x30, &plxdma);
+ plxdma &= ~15;

- while ((pdev = pci_find_device(SE6_PCI_VENDOR_ID, SE6_PCI_DEVICE_ID, pdev)) != NULL)
- {
- /*
- * Get and check the bus-master and latency values.
- * Some PCI BIOSes fail to set the master-enable bit,
- * and the latency timer must be set to the maximum
- * value to avoid data corruption that occurs when the
- * timer expires during a transfer. Yes, it's a bug.
- */
- if (pci_enable_device(pdev))
- continue;
- pci_set_master(pdev);
+ dgrs_found_device(io, mem, irq, plxreg, plxdma);

- plxreg = pci_resource_start (pdev, 0);
- io = pci_resource_start (pdev, 1);
- mem = pci_resource_start (pdev, 2);
- pci_read_config_dword(pdev, 0x30, &plxdma);
- irq = pdev->irq;
- plxdma &= ~15;
-
- /*
- * On some BIOSES, the PLX "expansion rom" (used for DMA)
- * address comes up as "0". This is probably because
- * the BIOS doesn't see a valid 55 AA ROM signature at
- * the "ROM" start and zeroes the address. To get
- * around this problem the SE-6 is configured to ask
- * for 4 MB of space for the dual port memory. We then
- * must set its range back to 2 MB, and use the upper
- * half for DMA register access
- */
- OUTL(io + PLX_SPACE0_RANGE, 0xFFE00000L);
- if (plxdma == 0)
- plxdma = mem + (2048L * 1024L);
- pci_write_config_dword(pdev, 0x30, plxdma + 1);
- pci_read_config_dword(pdev, 0x30, &plxdma);
- plxdma &= ~15;
-
- dgrs_found_device(io, mem, irq, plxreg, plxdma);
-
- cards_found++;
- }
+ cards_found++;
}

/*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.030 / U:2.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site