Messages in this thread |  | | Date | Sat, 31 May 2003 13:49:24 +0200 | From | Éric Brunet <> | Subject | Re: 2.5.70 freezes when running hwclock |
| |
On Sat, May 31, 2003 at 06:41:47PM +0800, Michael Frank wrote: > > I have tried 2.5.70 on an intel chipset based pc, and I > > got a reproductible complete freeze during the boot > > process when hwclock is run. Even Caps Lock wouldn't lit > > the little led. > This seems to be an ACPI related problem on ALI 1533/1535 > compatible implementations frequently seen on Toshiba's. > > As a workaround, Boot with ACPI=off and add --directisa to > hwclock lines in rc.sysinit and halt (or their equivalents) > > If this is really an Intel chipset it would be a first > > Please post your problem, solution and system info and lspci > to ACPI list.
hwclock --directisa works indeed. ACPI is indeed configured in, and I haven't tried to boot with ACPI=off.
Computer is a shuttle SB51G with an intel 845G/845GL chipset.
-------------------- lspci ---------------------------------- 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 03) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 03) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 02) 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) 01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) ------------------------------------------------------------------------------
I am not sure what is relevant about the RTC. Let's try this:
------------------ lspci -vvv -s 00:1f.0 ----------------------------- 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ------------------------------------------------------------------------
------------------- lspci -vvv -s 00:1f.3--------------------------- 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device fb50 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 0500 [size=32] --------------------------------------------------------------------
2.5.67 was working fine, with the same configuration.
Regards,
Éric Brunet - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |