Messages in this thread |  | | Date | Thu, 29 May 2003 17:00:14 -0600 | From | kwijibo@zianet ... | Subject | Re: 21rc6 serverworks IDE blows even more than is usual :) |
| |
Here is mine which doesn't work.
00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93) 00: 66 11 01 02 47 00 00 22 93 00 01 06 00 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 01 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 06 1e 0c 03 00 00 00 07 0f 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 8f c3 d1 15 00 00 00 20 00 00 00 00 70: 0f 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 01 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: a1 0e 00 00 80 00 5d 0f ff 0f 04 10 01 aa 00 ac b0: 00 07 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 03 58 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) 00: 66 11 12 02 45 01 00 02 93 82 01 01 08 40 80 00 10: f1 01 00 00 f5 03 00 00 01 00 00 00 01 00 00 00 20: 01 20 00 00 00 00 00 00 00 00 00 00 66 11 12 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 5d 20 5d 5d ff 00 ff ff 00 01 04 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 0f 04 03 00 00 00 00 00 60: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Steve
Duncan Laurie wrote:
> On Thu, 29 May 2003 13:40:01 +0200, Tomas Szepe > <szepe@pinerecords.com> wrote: > >> >> I can't seem to get the onboard Serverworks CSB5 IDE controller (rev 93) >> in a Compaq Proliant ML350 G3 to work (reliably/at all) no matter what >> kernel I use: >> > > Hi Tomas, > > This problem *may* actually be in the hardware... IIRC the CSB5 rev > 93h is > the A2.1 version of the chip which had big problems with DMA. The > workaround > options included a messy rework of the PCB or forcing it into PIO > mode, so we > decided instead to just stick with the A2.0 revision. :) > > However all of my knowledge about this particular issue is based on > >1yr old > information, so if you want to send the output of "lspci -xxx" for pci > devices > 00:0f.0 and 00:0f.1 I will check them over for any obvious settings > the BIOS > may have missed. > > -duncan > > - > To unsubscribe from this list: send the line "unsubscribe > linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |