Messages in this thread Patch in this message |  | | Date | Tue, 27 May 2003 18:04:03 +0400 | From | Ivan Kokshaysky <> | Subject | Re: Linux 2.4.21-rc3 : IDE pb on Alpha |
| |
On Tue, May 27, 2003 at 02:31:52PM +0200, Willy Tarreau wrote: > Sorry, I pasted the .config that I used just after, and which allowed me to > boot. Later I set CONFIG_BLK_DEV_ALI15X3 again and CONFIG_BLK_DEV_IDEDMA_PCI, > but I left CONFIG_IDEDMA_PCI_AUTO disabled. I now can boot and enable DMA > later. That's weird, but it works.
Perhaps not that weird. From my experience, ALi DMA is sensitive to some of "PIO timings". That is, if SRM hasn't initialized the chipset properly (on Nautilus it has, BTW), DMA won't work. When you boot with DMA disabled, driver has to set right PIO mode, so you can safely enable DMA later.
Can you (and Jason) try this patch with CONFIG_IDEDMA_PCI_AUTO=y?
Ivan.
--- linux/drivers/ide/pci/alim15x3.c.orig Tue Apr 22 19:17:22 2003 +++ linux/drivers/ide/pci/alim15x3.c Tue May 27 17:42:17 2003 @@ -525,10 +525,14 @@ static int ali15x3_config_drive_for_dma( drive->init_speed = 0; + /* Set reasonable PIO timings first - some of them are needed + for DMA as well. */ + hwif->tuneproc(drive, 255); + if ((id->capability & 1) != 0 && drive->autodma) { /* Consult the list of known "bad" drives */ if (hwif->ide_dma_bad_drive(drive)) - goto ata_pio; + goto no_dma_set; if ((id->field_valid & 4) && (m5229_revision >= 0xC2)) { if (id->dma_ultra & hwif->ultra_mask) { /* Force if Capable UltraDMA */ @@ -550,11 +554,9 @@ try_dma_modes: if (!config_chipset_for_dma(drive)) goto no_dma_set; } else { - goto ata_pio; + goto no_dma_set; } } else { -ata_pio: - hwif->tuneproc(drive, 255); no_dma_set: return hwif->ide_dma_off_quietly(drive); } - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |