Messages in this thread | | | Date | Thu, 15 May 2003 22:31:45 +0200 | Subject | kernel version 2.4.21-rc2-ac2 / acpi oops | From | Felix Triebel <> |
| |
Hi,
I hope the information below is helpful, please give me some feedback! CC to me, I'm not subscribed to this list.
I'm using kernel version 2.4.21-rc2-ac2, trying to suspend with acpi using: "echo 1 > /proc/acpi/sleep" "echo 2 > /proc/acpi/sleep" "echo 3 > /proc/acpi/sleep" does nothing.
"echo 5 > /proc/acpi/sleep" produces:
--------------------------------------------------------------------------
ksymoops 2.4.8 on i686 2.4.21-rc2-ac2. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.4.21-rc2-ac2/ (default) -m /System.map (specified)
Unable to handle kernel NULL pointer dereference at virtual address 00000000 c0111d2b *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[acpi_restore_pmd+11/32] Not tainted EFLAGS: 00210002 eax: 00000000 ebx: 00000005 ecx: 00000008 edx: 00000000 esi: 00000005 edi: 00000005 ebp: 00000002 esp: c9e9df30 ds: 0018 es: 0018 ss: 0018 Process bash (pid: 561, stackpage=c9e9d000) Stack: c019e6a9 00000005 00000001 c019e7eb 00000005 00000005 00000005 00000005 00000002 c9e9df64 c12f3140 c019ece1 00000005 00000a35 00000000 00000000 0000000a 00000000 ca13f740 ffffffea c01555a0 ca13f740 080dcc08 00000002 Call Trace: [acpi_system_restore_state+63/95] [acpi_suspend+86/159] [acpi_system_write_sleep+124/137] [proc_file_write+64/80] [sys_write+163/304] Code: 89 02 0f 20 d8 0f 22 d8 a1 84 75 29 c0 31 d2 e9 a1 f6 01 00 Using defaults from ksymoops -t elf32-i386 -a i386
>>esp; c9e9df30 <_end+9bd9aa0/10619bf0>
Code; 00000000 Before first symbol 00000000 <_EIP>: Code; 00000000 Before first symbol 0: 89 02 mov %eax,(%edx) Code; 00000002 Before first symbol 2: 0f 20 d8 mov %cr3,%eax Code; 00000005 Before first symbol 5: 0f 22 d8 mov %eax,%cr3 Code; 00000008 Before first symbol 8: a1 84 75 29 c0 mov 0xc0297584,%eax Code; 0000000d Before first symbol d: 31 d2 xor %edx,%edx Code; 0000000f Before first symbol f: e9 a1 f6 01 00 jmp 1f6b5 <_EIP+0x1f6b5>
--------------------------------------------------------------------------
Linux version 2.4.21-rc2-ac2 (root@triebel) (gcc version 3.2.3 20030415 (Debian prerelease)) #2 Die Mai 13 19:36:08 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffec000 (usable) BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data) BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 65516 zone(0): 4096 pages. zone(1): 61420 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6a70 ACPI: RSDT (v001 ASUS A7V-133 12336.12337) @ 0x0ffec000 ACPI: FADT (v001 ASUS A7V-133 12336.12337) @ 0x0ffec080 ACPI: BOOT (v001 ASUS A7V-133 12336.12337) @ 0x0ffec040 ACPI: DSDT (v001 ASUS A7V-133 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Kernel command line: auto BOOT_IMAGE=linux ro root=801 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 999.749 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1992.29 BogoMIPS Memory: 257008k/262064k available (1228k kernel code, 4668k reserved, 268k data, 108k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 999.7457 MHz. ..... host bus clock speed is 266.5988 MHz. cpu: 0, clocks: 2665988, slice: 1332994 CPU0<T0:2665984,T1:1332976,D:14,S:1332994,C:2665988> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030424 PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PCI: Probing PCI hardware PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Applying VIA southbridge workaround. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:04.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:pio hda: LS-120/240 00 UHD Floppy, ATAPI FLOPPY drive hdb: IOMEGA ZIP 250 ATAPI Floppy, ATAPI FLOPPY drive hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdb: set_drive_speed_status: error=0x04 ide0: Drive 1 didn't accept speed setting. Oh, well. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Partition check: hda:end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 unable to read partition table hdb:end_request: I/O error, dev 03:40 (hdb), sector 0 end_request: I/O error, dev 03:40 (hdb), sector 2 end_request: I/O error, dev 03:40 (hdb), sector 4 end_request: I/O error, dev 03:40 (hdb), sector 6 end_request: I/O error, dev 03:40 (hdb), sector 0 end_request: I/O error, dev 03:40 (hdb), sector 2 end_request: I/O error, dev 03:40 (hdb), sector 4 end_request: I/O error, dev 03:40 (hdb), sector 6 unable to read partition table SCSI subsystem driver Revision: 1.00 sym.0.11.0: setting PCI_COMMAND_PARITY... sym0: <895> rev 0x1 on pci bus 0 device 11 function 0 irq 10 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. spurious 8259A interrupt: IRQ7. scsi0 : sym-2.1.17a blk: queue cff11014, I/O limit 4095Mb (mask 0xffffffff) Vendor: PIONEER Model: DVD-ROM DVD-304 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 blk: queue cff11214, I/O limit 4095Mb (mask 0xffffffff) Vendor: IBM Model: DDYS-T18350N Rev: S93E Type: Direct-Access ANSI SCSI revision: 03 blk: queue cff11414, I/O limit 4095Mb (mask 0xffffffff) sym0:3:0: tagged command queuing enabled, command queue depth 16. Attached scsi disk sda at scsi0, channel 0, id 3, lun 0 sym0:3: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31) SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) sda: sda1 sda2 sda3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 08:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 108k freed Adding Swap: 249884k swap-space (priority -1) Real Time Clock Driver v1.10e ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states) matroxfb: Matrox G550 detected matroxfb: MTRR's turned on matroxfb: 640x480x8bpp (virtual: 640x26208) matroxfb: framebuffer at 0xE4000000, mapped to 0xd0910000, size 33554432 Console: switching to colour frame buffer device 80x30 fb0: MATROX VGA frame buffer device advansys: AscInitGetConfig: board 0: tag queuing enabled w/o disconnects advansys: AscInitSetConfig: board 0: tag queuing w/o disconnects scsi1 : AdvanSys SCSI 3.3G: PCI Ultra: IO 0x9400-0x940F, IRQ 0xB Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M agpgart: Detected Via Apollo Pro KT133 chipset agpgart: AGP aperture is 32M @ 0xe6000000 reiserfs: checking transaction log (device 08:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2047 buckets, 16376 max) - 292 bytes per conntrack 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:09.0: 3Com PCI 3c905C Tornado at 0xa400. Vers LK1.1.18-ac 00:01:02:f6:3c:e7, IRQ 4 product code 4552 rev 00.13 date 11-25-00 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 00:09.0: scatter/gather enabled. h/w checksums enabled CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/none/1.1.4.1 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 1.1.4.1 HiSax: Layer2 Revision 1.1.4.1 HiSax: TeiMgr Revision 1.1.4.1 HiSax: Layer3 Revision 1.1.4.1 HiSax: LinkLayer Revision 1.1.4.1 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: AVM PCI driver Rev. 1.1.4.1 AVM PCI: stat 0x2020a AVM PCI: Class A Rev 2 HiSax: AVM Fritz!PCI config irq:15 base:0xA000 AVM PCI: ISAC version (0): 2086/2186 V1.1 AVM Fritz PnP/PCI: IRQ 15 count 0 AVM Fritz PnP/PCI: IRQ 15 count 6 HiSax: DSS1 Rev. 1.1.4.1 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added isdn: Verbose-Level is 0 HiSax: debugging flags card 1 set to 4 ippp, open, slot: 0, minor: 0, state: 0000 ippp_ccp: allocated reset data structure cdbf8800 mtrr: no MTRR for e4000000,800000 found mtrr: no MTRR for e4800000,400000 found mtrr: no MTRR for e4c00000,200000 found mtrr: no MTRR for e4e00000,100000 found mtrr: no MTRR for e4f00000,80000 found mtrr: no MTRR for e4f80000,40000 found mtrr: no MTRR for e4fc0000,20000 found mtrr: no MTRR for e4fe0000,10000 found mtrr: no MTRR for e4ff0000,8000 found mtrr: no MTRR for e4ff8000,4000 found mtrr: no MTRR for e4ffc000,2000 found mtrr: no MTRR for e4ffe000,1000 found mtrr: no MTRR for e4000000,800000 found mtrr: no MTRR for e4800000,400000 found mtrr: no MTRR for e4c00000,200000 found mtrr: no MTRR for e4e00000,100000 found mtrr: no MTRR for e4f00000,80000 found mtrr: no MTRR for e4f80000,40000 found mtrr: no MTRR for e4fc0000,20000 found mtrr: no MTRR for e4fe0000,10000 found mtrr: no MTRR for e4ff0000,8000 found mtrr: no MTRR for e4ff8000,4000 found mtrr: no MTRR for e4ffc000,2000 found mtrr: no MTRR for e4ffe000,1000 found [drm] AGP 0.99 on VIA Apollo KT133 @ 0xe6000000 32MB [drm] Initialized mga 3.0.2 20010321 on minor 0 mtrr: base(0xe4000000) is not aligned on a size(0xfff000) boundary es1371: version v0.32 time 18:14:36 May 13 2003 es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x02 es1371: found es1371 rev 2 at io 0x9000 irq 4 es1371: features: joystick 0x0 ac97_codec: AC97 codec, id: TRA3 (TriTech TR28023)
-------------------------------------------------------------------------- [unhandled content-type:application/pgp-signature] | |