lkml.org 
[lkml]   [2003]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectAvoid ide-scsi from starting DMA too soon
This went into 2.4 with the following comments..

ide-scsi driver starts DMA as soon as it writes the ATAPI PACKET command
in command register and before sending the ATAPI command. This will
cause problems on many drives. Right way to do it is to start DMA after
sending the ATAPI command. I am attaching a patch that fixes this. This
patch will allow many more CD-RW drives to work reliably in DMA mode
than do today

Alan's comment to this diff previously..
"Thats the least of the 2.5 ide-scsi problems, but yes its probably one to add"

--- bk-linus/drivers/scsi/ide-scsi.c 2003-04-10 06:01:23.000000000 +0100
+++ linux-2.5/drivers/scsi/ide-scsi.c 2003-05-15 03:55:52.000000000 +0100
@@ -78,6 +78,7 @@ typedef struct idescsi_pc_s {
#define PC_DMA_IN_PROGRESS 0 /* 1 while DMA in progress */
#define PC_WRITING 1 /* Data direction */
#define PC_TRANSFORM 2 /* transform SCSI commands */
+#define PC_DMA_OK 4 /* Use DMA */

/*
* SCSI command transformation layer
@@ -494,6 +495,10 @@ static ide_startstop_t idescsi_transfer_
ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), NULL);
/* Send the actual packet */
atapi_output_bytes(drive, scsi->pc->c, 12);
+ if (test_bit (PC_DMA_OK, &pc->flags)) {
+ set_bit (PC_DMA_IN_PROGRESS, &pc->flags);
+ (void) (HWIF(drive)->ide_dma_begin(drive));
+ }
return ide_started;
}

@@ -527,10 +532,9 @@ static ide_startstop_t idescsi_issue_pc
HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG);
HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG);

- if (feature.b.dma) {
- set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
- (void) (HWIF(drive)->ide_dma_begin(drive));
- }
+ if (feature.b.dma)
+ set_bit(PC_DMA_OK, &pc->flags);
+
if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
if (HWGROUP(drive)->handler != NULL)
BUG();
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.127 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site