lkml.org 
[lkml]   [2003]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject2.5.69 still can't write DVD...
    Hello,

    just wanted to inform you that the DVD writing in last 2.5 still don't
    work :-(

    Cdrecord-ProDVD-Clone 2.01a11 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
    Unlocked features: ProDVD Clone
    Limited features: speed
    This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
    TOC Type: 1 = CD-ROM
    scsidev: '/dev/hdc'
    devname: '/dev/hdc'
    scsibus: -2 target: -2 lun: -2
    Warning: Open by 'devname' is unintentional and not supported.
    Linux sg driver version: 3.5.27
    Using libscg version 'schily-0.7'
    Driveropts: 'burnfree'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 2
    Response Format: 2
    Capabilities :
    Vendor_info : 'SONY '
    Identifikation : 'DVD RW DRU-500A '
    Revision : '2.0e'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Profile: DVD+R
    Profile: DVD+RW
    Profile: DVD-RW sequential overwrite
    Profile: DVD-RW restricted overwrite
    Profile: DVD-R sequential recording (current)
    Profile: DVD-ROM
    Profile: CD-RW
    Profile: CD-R
    Profile: CD-ROM
    Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
    Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
    Drive buf size : 4718592 = 4608 KB
    FIFO size : 67108864 = 65536 KB
    Track 01: data 2137 MB
    Total size: 2137 MB = 1094395 sectors
    Current Secsize: 2048
    Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1204101
    Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
    Last chance to quit, starting dummy write in 9 seconds. 0.46% done, estimate finish Sat May 10 12:25:02 2003
    0.91% done, estimate finish Sat May 10 12:23:13 2003
    1.37% done, estimate finish Sat May 10 12:22:36 2003
    1.83% done, estimate finish Sat May 10 12:22:18 2003
    2.29% done, estimate finish Sat May 10 12:22:07 2003
    2.74% done, estimate finish Sat May 10 12:22:00 2003
    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    BURN-Free is ON.
    Starting new track at sector: 0
    Track 01: 4 of 2137 MB written (fifo 99%) [buf 92%] 15.9x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
    CDB: 2A 00 00 00 08 B8 00 00 1F 00
    status: 0x1 (GOOD STATUS)
    resid: 63488
    cmd finished after 0.008s timeout 100s

    write track data: error after 4571136 bytes
    cdrecord-prodvd: A write error occured.
    cdrecord-prodvd: Please properly read the error message above.
    cdrecord-prodvd: Success. test unit ready: scsi sendcmd: no error
    CDB: 00 00 00 00 00 00
    status: 0x1 (GOOD STATUS)
    cmd finished after 0.004s timeout 100s
    Writing time: 5.266s
    Average write speed 309.2x.
    Fixating...
    Fixating time: 77.101s
    cdrecord-prodvd: fifo had 1095 puts and 73 gets.
    cdrecord-prodvd: fifo was 0 times empty and 11 times full, min fill was 99%.

    Grégoire
    ________________________________________________________________
    http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:35    [W:17.066 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site