lkml.org 
[lkml]   [2003]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [Linux-fbdev-devel] [PATCH]: EDID parser
    From
    On Thu, Apr 03, 2003 at 05:15:32PM +0100, Alan Cox wrote:
    > On Iau, 2003-04-03 at 18:10, Sven Luther wrote:
    > > It has two outputs, where i can hook either a DVI or a VGA monitor. Each
    > > of these video outputs correspond to a viewport, and there is hardware
    > > which will let you set the output timings and the dot clock. You also
    > > have to configure which part of the framebuffer you are reading, and
    > > eventually setup a scaller to scale the pixels you read to the correct
    > > output buffer. You also have for each head a DDC/I2C bus you can use to
    > > speak with the monitor.
    >
    > Very common except lower end stuff generally has a single frame buffer
    > that both show and cannot be split or scanned by multiple outputs at
    > different rates.

    So, using the terminology of Petr's graph, you have only one CRTC, with
    two possible outputs, or maybe you have two CRTC but which needs to be
    synchronized between them ?

    Friendly,

    Sven Luther
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:34    [W:0.034 / U:30.992 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site