lkml.org 
[lkml]   [2003]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH][v850] Add v850 support for hardware single-step (via ptrace)
Date
From
diff -ruN -X../cludes linux-2.5.68-uc0/arch/v850/kernel/entry.S linux-2.5.68-uc0-v850-20030421/arch/v850/kernel/entry.S
--- linux-2.5.68-uc0/arch/v850/kernel/entry.S 2003-04-21 10:52:40.000000000 +0900
+++ linux-2.5.68-uc0-v850-20030421/arch/v850/kernel/entry.S 2003-04-21 11:27:09.000000000 +0900
@@ -234,25 +235,30 @@
sst.w syscall_num, PTO+PT_CUR_SYSCALL[ep]


-/* Save register state not normally saved by PUSH_STATE for TYPE. */
+/* Save register state not normally saved by PUSH_STATE for TYPE, to the
+ state-save-frame on the stack; also copies SP to EP. r19 may be trashed. */
#define SAVE_EXTRA_STATE(type) \
- mov sp, ep; \
+ mov sp, ep; \
type ## _EXTRA_STATE_SAVER
-/* Restore register state not normally restored by POP_STATE for TYPE. */
+/* Restore register state not normally restored by POP_STATE for TYPE,
+ from the state-save-frame on the stack; also copies SP to EP.
+ r19 may be trashed. */
#define RESTORE_EXTRA_STATE(type) \
- mov sp, ep; \
+ mov sp, ep; \
type ## _EXTRA_STATE_RESTORER

-/* Save any call-clobbered registers not normally saved by PUSH_STATE
- for TYPE. */
-#define SAVE_EXTRA_STATE_FOR_FUNCALL(type) \
- mov sp, ep; \
- type ## _FUNCALL_EXTRA_STATE_SAVER
-/* Restore any call-clobbered registers not normally restored by POP_STATE for
- TYPE. */
-#define RESTORE_EXTRA_STATE_FOR_FUNCALL(type) \
- mov sp, ep; \
- type ## _FUNCALL_EXTRA_STATE_RESTORER
+/* Save any call-clobbered registers not normally saved by PUSH_STATE for
+ TYPE, to the state-save-frame on the stack.
+ EP may be trashed, but is not guaranteed to contain a copy of SP
+ (unlike after most SAVE_... macros). r19 may be trashed. */
+#define SAVE_EXTRA_STATE_FOR_SCHEDULE(type) \
+ type ## _SCHEDULE_EXTRA_STATE_SAVER
+/* Restore any call-clobbered registers not normally restored by
+ POP_STATE for TYPE, to the state-save-frame on the stack.
+ EP may be trashed, but is not guaranteed to contain a copy of SP
+ (unlike after most RESTORE_... macros). r19 may be trashed. */
+#define RESTORE_EXTRA_STATE_FOR_SCHEDULE(type) \
+ type ## _SCHEDULE_EXTRA_STATE_RESTORER


/* These are extra_state_saver/restorer values for a user trap. Note
@@ -263,36 +269,48 @@
caller of the syscall function should have saved them. */

#define TRAP_RET reti
-/* Traps don't save call-clobbered registers (but do still save arg regs). */
+/* Traps don't save call-clobbered registers (but do still save arg regs).
+ We preserve PSw to keep long-term state, namely interrupt status (for traps
+ from kernel-mode), and the single-step flag (for user traps). */
#define TRAP_STATE_SAVER \
SAVE_ARG_REGS; \
- SAVE_PC(EIPC)
+ SAVE_PC(EIPC); \
+ SAVE_PSW(EIPSW)
/* When traps return, they just leave call-clobbered registers (except for arg
- regs) with whatever value they have from the kernel. */
+ regs) with whatever value they have from the kernel. Traps don't preserve
+ the PSW, but we zero EIPSW to ensure it doesn't contain anything dangerous
+ (in particular, the single-step flag). */
#define TRAP_STATE_RESTORER \
RESTORE_ARG_REGS; \
- RESTORE_PC(EIPC)
+ RESTORE_PC(EIPC); \
+ RESTORE_PSW(EIPSW)
/* Save registers not normally saved by traps. We need to save r12, even
though it's nominally call-clobbered, because it's used when restarting
a system call (the signal-handling path uses SAVE_EXTRA_STATE, and
- expects r12 to be restored when the trap returns). Similarly, we must
- save the PSW, so that it's at least in a known state in the the pt_regs
- structure. */
+ expects r12 to be restored when the trap returns). */
#define TRAP_EXTRA_STATE_SAVER \
SAVE_RVAL_REGS; \
sst.w r12, PTO+PT_GPR(12)[ep]; \
SAVE_CALL_SAVED_REGS; \
- SAVE_PSW(EIPSW); \
SAVE_CT_REGS
#define TRAP_EXTRA_STATE_RESTORER \
RESTORE_RVAL_REGS; \
sld.w PTO+PT_GPR(12)[ep], r12; \
RESTORE_CALL_SAVED_REGS; \
- RESTORE_PSW(EIPSW); \
RESTORE_CT_REGS
-#define TRAP_FUNCALL_EXTRA_STATE_SAVER \
+/* Save registers prior to calling scheduler (just before trap returns).
+ We have to save the return-value registers to preserve the trap's return
+ value. Note that ..._SCHEDULE_EXTRA_STATE_SAVER, unlike most ..._SAVER
+ macros, is required to setup EP itself if EP is needed (this is because
+ in many cases, the macro is empty). */
+#define TRAP_SCHEDULE_EXTRA_STATE_SAVER \
+ mov sp, ep; \
SAVE_RVAL_REGS
-#define TRAP_FUNCALL_EXTRA_STATE_RESTORER \
+/* Note that ..._SCHEDULE_EXTRA_STATE_RESTORER, unlike most ..._RESTORER
+ macros, is required to setup EP itself if EP is needed (this is because
+ in many cases, the macro is empty). */
+#define TRAP_SCHEDULE_EXTRA_STATE_RESTORER \
+ mov sp, ep; \
RESTORE_RVAL_REGS

/* Register saving/restoring for maskable interrupts. */
@@ -390,33 +408,34 @@
ld.w TI_FLAGS[r18], r19; \
andi _TIF_NEED_RESCHED, r19, r0; \
bnz 3f; /* Call the scheduler. */ \
- andi _TIF_SIGPENDING, r19, r0; \
+5: andi _TIF_SIGPENDING, r19, r18; \
+ ld.w TASK_PTRACE[CURRENT_TASK], r19; /* ptrace flags */ \
+ or r18, r19; /* see if either is non-zero */ \
bnz 4f; /* Signals to handle, handle them */ \
\
-/* Return to user state. */ \
+/* Return to user state. */ \
1: st.b r0, KM; /* Now officially in user state. */ \
\
/* Final return. The stack-pointer fiddling is not needed when returning \
to kernel-mode, but they don't hurt, and this way we can share the \
- (somtimes rather lengthy) POP_STATE macro. */ \
+ (sometimes rather lengthy) POP_STATE macro. */ \
2: POP_STATE(type); \
st.w sp, KSP; /* Save the kernel stack pointer. */ \
- ld.w PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */ \
+ ld.w PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */ \
type ## _RET; /* Return from the trap/interrupt. */ \
\
/* Call the scheduler before returning from a syscall/trap. */ \
-3: SAVE_EXTRA_STATE_FOR_FUNCALL(type); /* Prepare for funcall. */ \
- jarl CSYM(schedule), lp; /* Call scheduler */ \
+3: SAVE_EXTRA_STATE_FOR_SCHEDULE(type); /* Prepare to call scheduler. */ \
+ jarl call_scheduler, lp; /* Call scheduler */ \
di; /* The scheduler enables interrupts */\
- RESTORE_EXTRA_STATE_FOR_FUNCALL(type); \
+ RESTORE_EXTRA_STATE_FOR_SCHEDULE(type); \
GET_CURRENT_THREAD(r18); \
ld.w TI_FLAGS[r18], r19; \
- andi _TIF_SIGPENDING, r19, r0; \
- bz 1b; /* No signals, return. */ \
- /* Signals to handle, fall through to handle them. */ \
+ br 5b; /* Continue with return path. */ \
\
-/* Handle a signal return. */ \
-4: /* Not all registers are saved by the normal trap/interrupt entry \
+/* Handle a signal or ptraced process return. \
+ r18 should be non-zero if there are pending signals. */ \
+4: /* Not all registers are saved by the normal trap/interrupt entry \
points (for instance, call-saved registers (because the normal \
C-compiler calling sequence in the kernel makes sure they're \
preserved), and call-clobbered registers in the case of \
@@ -424,12 +443,9 @@
complete register state. Here we save anything not saved by \
the normal entry sequence, so that it may be safely restored \
(in a possibly modified form) after do_signal returns. */ \
- SAVE_EXTRA_STATE(type); /* Save state not saved by entry. */ \
- movea PTO, sp, r6; /* Arg 1: struct pt_regs *regs */ \
- mov r0, r7; /* Arg 2: sigset_t *oldset */ \
- jarl CSYM(do_signal), lp; /* Handle any signals */ \
- di; /* sig handling enables interrupts */ \
- RESTORE_EXTRA_STATE(type); /* Restore extra regs. */ \
+ SAVE_EXTRA_STATE(type); /* Save state not saved by entry. */ \
+ jarl handle_signal_or_ptrace_return, lp; \
+ RESTORE_EXTRA_STATE(type); /* Restore extra regs. */ \
br 1b


@@ -668,22 +684,50 @@
* indirect jump).
*/
G_ENTRY(dbtrap):
- SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
+ SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
+
+ /* First see if we came from kernel mode; if so, the dbtrap
+ instruction has a special meaning, to set the DIR (`debug
+ information register') register. This is because the DIR register
+ can _only_ be manipulated/read while in `debug mode,' and debug
+ mode is only active while we're inside the dbtrap handler. The
+ exact functionality is: { DIR = (DIR | r6) & ~r7; return DIR; }. */
+ ld.b PTO+PT_KERNEL_MODE[sp], r19
+ cmp r19, r0
+ bz 1f
+
+ stsr SR_DIR, r10
+ or r6, r10
+ not r7, r7
+ and r7, r10
+ ldsr r10, SR_DIR
+ stsr SR_DIR, r10 // Confirm the value we set
+ st.w r10, PTO+PT_GPR(10)[sp] // return it
+ br 3f
+
+1: ei // Enable interrupts.
+
+ /* The default signal type we raise. */
+ mov SIGTRAP, r6
+
+ /* See if it's a single-step trap. */
+ stsr SR_DBPSW, r19
+ andi 0x0800, r19, r19
+ bnz 2f

/* Look to see if the preceding instruction was is a dbtrap or not,
to decide which signal we should use. */
stsr SR_DBPC, r19 // PC following trapping insn
ld.hu -2[r19], r19
- mov SIGTRAP, r6
ori 0xf840, r0, r20 // DBTRAP insn
cmp r19, r20 // Was this trap caused by DBTRAP?
cmov ne, SIGILL, r6, r6 // Choose signal appropriately

/* Raise the desired signal. */
- mov CURRENT_TASK, r7 // Arg 1: task
- jarl CSYM(force_sig), lp // tail call
+2: mov CURRENT_TASK, r7 // Arg 1: task
+ jarl CSYM(send_sig), lp // tail call

- RETURN(DBTRAP)
+3: RETURN(DBTRAP)
END(dbtrap)


@@ -725,9 +769,93 @@


/*
+ * Invoke the scheduler, called from the trap/irq kernel exit path.
+ *
+ * This basically just calls `schedule', but also arranges for extra
+ * registers to be saved for ptrace'd processes, so ptrace can modify them.
+ */
+L_ENTRY(call_scheduler):
+ ld.w TASK_PTRACE[CURRENT_TASK], r19 // See if task is ptrace'd
+ cmp r19, r0
+ bnz 1f // ... yes, do special stuff
+ jr CSYM(schedule) // ... no, just tail-call scheduler
+
+ // Save extra regs for ptrace'd task. We want to save anything
+ // that would otherwise only be `implicitly' saved by the normal
+ // compiler calling-convention.
+1: mov sp, ep // Setup EP for SAVE_CALL_SAVED_REGS
+ SAVE_CALL_SAVED_REGS // Save call-saved registers to stack
+ mov lp, r20 // Save LP in a callee-saved register
+
+ jarl CSYM(schedule), lp // Call scheduler
+
+ mov r20, lp
+ mov sp, ep // We can't rely on EP after return
+ RESTORE_CALL_SAVED_REGS // Restore (possibly modified) regs
+ jmp [lp] // Return to the return path
+END(call_scheduler)
+
+
+/*
+ * This is an out-of-line handler for two special cases during the kernel
+ * trap/irq exit sequence:
+ *
+ * (1) If r18 is non-zero then a signal needs to be handled, which is
+ * done, and then the caller returned to.
+ *
+ * (2) If r18 is non-zero then we're returning to a ptraced process, which
+ * has several special cases -- single-stepping and trap tracing, both
+ * of which require using the `dbret' instruction to exit the kernel
+ * instead of the normal `reti' (this is because the CPU not correctly
+ * single-step after a reti). In this case, of course, this handler
+ * never returns to the caller.
+ *
+ * In either case, all registers should have been saved to the current
+ * state-save-frame on the stack, except for callee-saved registers.
+ *
+ * [These two different cases are combined merely to avoid bloating the
+ * macro-inlined code, not because they really make much sense together!]
+ */
+L_ENTRY(handle_signal_or_ptrace_return):
+ cmp r18, r0 // See if handling a signal
+ bz 1f // ... nope, go do ptrace return
+
+ // Handle a signal
+ mov lp, r20 // Save link-pointer
+ mov r10, r21 // Save return-values (for trap)
+ mov r11, r22
+
+ movea PTO, sp, r6 // Arg 1: struct pt_regs *regs
+ mov r0, r7 // Arg 2: sigset_t *oldset
+ jarl CSYM(do_signal), lp // Handle the signal
+ di // sig handling enables interrupts
+
+ mov r20, lp // Restore link-pointer
+ mov r21, r10 // Restore return-values (for trap)
+ mov r22, r11
+ ld.w TASK_PTRACE[CURRENT_TASK], r19 // check ptrace flags too
+ cmp r19, r0
+ bnz 1f // ... some set, so look more
+2: jmp [lp] // ... none set, so return normally
+
+ // ptrace return
+1: ld.w PTO+PT_PSW[sp], r19 // Look at user-processes's flags
+ andi 0x0800, r19, r19 // See if single-step flag is set
+ bz 2b // ... nope, return normally
+
+ // Return as if from a dbtrap insn
+ st.b r0, KM // Now officially in user state.
+ POP_STATE(DBTRAP) // Restore regs
+ st.w sp, KSP // Save the kernel stack pointer.
+ ld.w PT_GPR(GPR_SP)-PT_SIZE[sp], sp // Restore user stack pointer.
+ DBTRAP_RET // Return from the trap/interrupt.
+END(handle_signal_or_ptrace_return)
+
+
+/*
* This is where we switch between two threads. The arguments are:
* r6 -- pointer to the struct thread for the `current' process
- * r7 -- pointer to the struct thread for the `new' process.
+ * r7 -- pointer to the struct thread for the `new' process.
* when this function returns, it will return to the new thread.
*/
C_ENTRY(switch_thread):
diff -ruN -X../cludes linux-2.5.68-uc0/arch/v850/kernel/ptrace.c linux-2.5.68-uc0-v850-20030421/arch/v850/kernel/ptrace.c
--- linux-2.5.68-uc0/arch/v850/kernel/ptrace.c 2002-11-05 11:25:22.000000000 +0900
+++ linux-2.5.68-uc0-v850-20030421/arch/v850/kernel/ptrace.c 2003-04-21 11:27:09.000000000 +0900
@@ -1,8 +1,8 @@
/*
* arch/v850/kernel/ptrace.c -- `ptrace' system call
*
- * Copyright (C) 2002 NEC Corporation
- * Copyright (C) 2002 Miles Bader <miles@gnu.org>
+ * Copyright (C) 2002,03 NEC Electronics Corporation
+ * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
*
* Derived from arch/mips/kernel/ptrace.c:
*
@@ -29,6 +29,89 @@
#include <asm/processor.h>
#include <asm/uaccess.h>

+/* Returns the address where the register at REG_OFFS in P is stashed away. */
+static v850_reg_t *reg_save_addr (unsigned reg_offs, struct task_struct *t)
+{
+ struct pt_regs *regs;
+
+ /* Three basic cases:
+
+ (1) A register normally saved before calling the scheduler, is
+ available in the kernel entry pt_regs structure at the top
+ of the kernel stack. The kernel trap/irq exit path takes
+ care to save/restore almost all registers for ptrace'd
+ processes.
+
+ (2) A call-clobbered register, where the process P entered the
+ kernel via [syscall] trap, is not stored anywhere; that's
+ OK, because such registers are not expected to be preserved
+ when the trap returns anyway (so we don't actually bother to
+ test for this case).
+
+ (3) A few registers not used at all by the kernel, and so
+ normally never saved except by context-switches, are in the
+ context switch state. */
+
+ if (reg_offs == PT_CTPC || reg_offs == PT_CTPSW || reg_offs == PT_CTBP)
+ /* Register saved during context switch. */
+ regs = thread_saved_regs (t);
+ else
+ /* Register saved during kernel entry (or not available). */
+ regs = task_regs (t);
+
+ return (v850_reg_t *)((char *)regs + reg_offs);
+}
+
+/* Set the bits SET and clear the bits CLEAR in the v850e DIR
+ (`debug information register'). Returns the new value of DIR. */
+static inline v850_reg_t set_dir (v850_reg_t set, v850_reg_t clear)
+{
+ register v850_reg_t rval asm ("r10");
+ register v850_reg_t arg0 asm ("r6") = set;
+ register v850_reg_t arg1 asm ("r7") = clear;
+
+ /* The dbtrap handler has exactly this functionality when called
+ from kernel mode. 0xf840 is a `dbtrap' insn. */
+ asm (".short 0xf840" : "=r" (rval) : "r" (arg0), "r" (arg1));
+
+ return rval;
+}
+
+/* Makes sure hardware single-stepping is (globally) enabled.
+ Returns true if successful. */
+static inline int enable_single_stepping (void)
+{
+ static int enabled = 0; /* Remember whether we already did it. */
+ if (! enabled) {
+ /* Turn on the SE (`single-step enable') bit, 0x100, in the
+ DIR (`debug information register'). This may fail if a
+ processor doesn't support it or something. We also try
+ to clear bit 0x40 (`INI'), which is necessary to use the
+ debug stuff on the v850e2; on the v850e, clearing 0x40
+ shouldn't cause any problem. */
+ v850_reg_t dir = set_dir (0x100, 0x40);
+ /* Make sure it really got set. */
+ if (dir & 0x100)
+ enabled = 1;
+ }
+ return enabled;
+}
+
+/* Try to set CHILD's single-step flag to VAL. Returns true if successful. */
+static int set_single_step (struct task_struct *t, int val)
+{
+ v850_reg_t *psw_addr = reg_save_addr(PT_PSW, t);
+ if (val) {
+ /* Make sure single-stepping is enabled. */
+ if (! enable_single_stepping ())
+ return 0;
+ /* Set T's single-step flag. */
+ *psw_addr |= 0x800;
+ } else
+ *psw_addr &= ~0x800;
+ return 1;
+}
+
int sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
@@ -36,12 +119,6 @@

lock_kernel();

-#if 0
- printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
- (int) request, (int) pid, (unsigned long) addr,
- (unsigned long) data);
-#endif
-
if (request == PTRACE_TRACEME) {
/* are we already being traced? */
if (current->ptrace & PT_PTRACED) {
@@ -81,31 +158,15 @@
goto out_tsk;

switch (request) {
- case PTRACE_PEEKTEXT: /* read word at location addr. */
- case PTRACE_PEEKDATA:{
- unsigned long tmp;
- int copied;
+ unsigned long val, copied;

- copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ case PTRACE_PEEKDATA:
+ copied = access_process_vm(child, addr, &val, sizeof(val), 0);
rval = -EIO;
- if (copied != sizeof(tmp))
+ if (copied != sizeof(val))
break;
- rval = put_user(tmp,(unsigned long *) data);
-
- goto out;
- }
-
- /* Read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR:
- if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
- struct pt_regs *regs = task_regs (child);
- unsigned long val =
- *(unsigned long *)((char *)regs + addr);
- rval = put_user (val, (unsigned long *)data);
- } else {
- rval = 0;
- rval = -EIO;
- }
+ rval = put_user(val, (unsigned long *)data);
goto out;

case PTRACE_POKETEXT: /* write the word at location addr. */
@@ -117,35 +178,62 @@
rval = -EIO;
goto out;

+ /* Read/write the word at location ADDR in the registers. */
+ case PTRACE_PEEKUSR:
case PTRACE_POKEUSR:
- if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
- struct pt_regs *regs = task_regs (child);
- unsigned long *loc =
- (unsigned long *)((char *)regs + addr);
- *loc = data;
- } else {
- rval = 0;
- rval = -EIO;
- }
+ rval = 0;
+ if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
+ /* Special requests that don't actually correspond
+ to offsets in struct pt_regs. */
+ if (addr == PT_TEXT_ADDR)
+ val = child->mm->start_code;
+ else if (addr == PT_DATA_ADDR)
+ val = child->mm->start_data;
+ else if (addr == PT_TEXT_LEN)
+ val = child->mm->end_code
+ - child->mm->start_code;
+ else
+ rval = -EIO;
+ } else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
+ v850_reg_t *reg_addr = reg_save_addr(addr, child);
+ if (request == PTRACE_PEEKUSR)
+ val = *reg_addr;
+ else
+ *reg_addr = data;
+ } else
+ rval = -EIO;
+
+ if (rval == 0 && request == PTRACE_PEEKUSR)
+ rval = put_user (val, (unsigned long *)data);
goto out;

- case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
- case PTRACE_CONT: /* rvaltart after signal. */
+ /* Continue and stop at next (return from) syscall */
+ case PTRACE_SYSCALL:
+ /* Restart after a signal. */
+ case PTRACE_CONT:
+ /* Execute a single instruction. */
+ case PTRACE_SINGLESTEP:
rval = -EIO;
if ((unsigned long) data > _NSIG)
break;
+
+ /* Turn CHILD's single-step flag on or off. */
+ if (! set_single_step (child, request == PTRACE_SINGLESTEP))
+ break;
+
if (request == PTRACE_SYSCALL)
set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
else
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
child->exit_code = data;
wake_up_process(child);
rval = 0;
break;

/*
- * make the child exit. Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
* exit.
*/
case PTRACE_KILL:
@@ -157,6 +245,7 @@
break;

case PTRACE_DETACH: /* detach a process that was attached. */
+ set_single_step (child, 0); /* Clear single-step flag */
rval = ptrace_detach(child, data);
break;

@@ -181,7 +270,7 @@
/* The 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
current->exit_code = SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0);
+ ? 0x80 : 0);
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:34    [W:0.053 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site