Messages in this thread | | | Date | Tue, 4 Mar 2003 13:16:22 -0500 (EST) | From | Donald Becker <> | Subject | Re: PCI init issues |
| |
On Mon, 3 Mar 2003, Ivan Kokshaysky wrote: > On Sun, Mar 02, 2003 at 12:44:06PM -0500, jamal wrote: > > Interupt routing as can be seen above is really messed for that device. > > Indeed. Quad tulip cards usually have irq pin A of each chip routed > to pins A-D on the connector, so they cannot have the same irq unless
Incorrect. Most quad Tulip boards have the bus bridge wired so that all interrupts are sent on the INTA output of the board.
The tulip.c driver has worked around the BIOS bug on x86 machines for years. It should really be handled in the generic PCI quirks code, but has not yet been correctly handled in the kernel's code.
-- Donald Becker becker@scyld.com Scyld Computing Corporation http://www.scyld.com 410 Severn Ave. Suite 210 Scyld Beowulf cluster system Annapolis MD 21403 410-990-9993
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |