Messages in this thread | | | Date | Sat, 22 Mar 2003 17:39:11 +0100 | From | Jan Dittmer <> | Subject | Re: 2.5.65-ac2 -- hda/ide trouble on ICH4 |
| |
Alan Cox wrote: > On Sat, 2003-03-22 at 16:25, Dominik Brodowski wrote: > >>>Where is the lock, what does the NMI oopser show ? >> >>The lock is directly "below" that line -- and the NMI oopser isn't >>triggered, AFAICT > > > Anything useful off right-alt scroll-lock etc ? > I'm seeing the same problem. VIA KT133A platform, nothing after partition detection. No NMI-Watchdog, no sysrq magic. Just dead. Any patch particular I could try to revert?
Jan
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L060AVV207-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive hdd: Pioneer DVD-ROM ATAPIModel DVD-104S 012, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |