lkml.org 
[lkml]   [2003]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch] NUMAQ subarchification
James Bottomley wrote:
>> This patch adds a new file, arch/i386/kernel/summit.c, for
>> summit-specific code. Adds some structures to mach_mpparse.h. Also
>> adds a hook in setup_arch() to dig out the PCI info, and stores it in
>> the mp_bus_id_to_node[] array, where it can be read by the topology
>> functions.
>
> Wouldn't this file be better in arch/i386/mach-summit in keeping with
> all the other subarch stuff?
>
> While you're creating a separate file for summit, could you move the
> summit specific variables (mpparse.c:x86_summit is the only one, I
> think) into it so we can clean all the summit references out of the main
> line?
>
> Thanks,
>
> James

While I was at it, I subarchified (I'll cc Websters with the new word ;)
numaq as well. Copied mach-defaults setup.c, topology.c, and Makefile.
Moved arch/i386/kernel/numaq.c into mach-numaq. Compiles.

Cheers!

-Matt
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/Makefile linux-2.5.64-numaq_subarch/arch/i386/Makefile
--- linux-2.5.64-vanilla/arch/i386/Makefile Tue Mar 4 19:29:16 2003
+++ linux-2.5.64-numaq_subarch/arch/i386/Makefile Fri Mar 14 15:28:53 2003
@@ -61,14 +61,14 @@
mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-i386/mach-visws
mcore-$(CONFIG_X86_VISWS) := mach-visws

-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := mach-default
-
# BIGSMP subarch support
mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-i386/mach-bigsmp
mcore-$(CONFIG_X86_BIGSMP) := mach-default

+# NUMAQ subarch support
+mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
+mcore-$(CONFIG_X86_NUMAQ) := mach-numaq
+
#Summit subarch support
mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-i386/mach-summit
mcore-$(CONFIG_X86_SUMMIT) := mach-default
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/kernel/Makefile linux-2.5.64-numaq_subarch/arch/i386/kernel/Makefile
--- linux-2.5.64-vanilla/arch/i386/kernel/Makefile Tue Mar 4 19:29:01 2003
+++ linux-2.5.64-numaq_subarch/arch/i386/kernel/Makefile Fri Mar 14 15:29:40 2003
@@ -24,7 +24,6 @@
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o suspend_asm.o
-obj-$(CONFIG_X86_NUMAQ) += numaq.o
obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_MODULES) += module.o
obj-y += sysenter.o
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/kernel/numaq.c linux-2.5.64-numaq_subarch/arch/i386/kernel/numaq.c
--- linux-2.5.64-vanilla/arch/i386/kernel/numaq.c Tue Mar 4 19:29:32 2003
+++ linux-2.5.64-numaq_subarch/arch/i386/kernel/numaq.c Wed Dec 31 16:00:00 1969
@@ -1,127 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@us.ibm.com>
- */
-
-#include <linux/config.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/mmzone.h>
-#include <linux/module.h>
-#include <asm/numaq.h>
-
-/* These are needed before the pgdat's are created */
-unsigned long node_start_pfn[MAX_NUMNODES];
-unsigned long node_end_pfn[MAX_NUMNODES];
-
-#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
-
-/*
- * Function: smp_dump_qct()
- *
- * Description: gets memory layout from the quad config table. This
- * function also increments numnodes with the number of nodes (quads)
- * present.
- */
-static void __init smp_dump_qct(void)
-{
- int node;
- struct eachquadmem *eq;
- struct sys_cfg_data *scd =
- (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
-
- numnodes = 0;
- for(node = 0; node < MAX_NUMNODES; node++) {
- if(scd->quads_present31_0 & (1 << node)) {
- node_set_online(node);
- numnodes++;
- eq = &scd->eq[node];
- /* Convert to pages */
- node_start_pfn[node] = MB_TO_PAGES(
- eq->hi_shrd_mem_start - eq->priv_mem_size);
- node_end_pfn[node] = MB_TO_PAGES(
- eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
- }
- }
-}
-
-/*
- * -----------------------------------------
- *
- * functions related to physnode_map
- *
- * -----------------------------------------
- */
-/*
- * physnode_map keeps track of the physical memory layout of the
- * numaq nodes on a 256Mb break (each element of the array will
- * represent 256Mb of memory and will be marked by the node id. so,
- * if the first gig is on node 0, and the second gig is on node 1
- * physnode_map will contain:
- * physnode_map[0-3] = 0;
- * physnode_map[4-7] = 1;
- * physnode_map[8- ] = -1;
- */
-int physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1};
-EXPORT_SYMBOL(physnode_map);
-
-/*
- * for each node mark the regions
- * TOPOFMEM = hi_shrd_mem_start + hi_shrd_mem_size
- *
- * need to be very careful to not mark 1024+ as belonging
- * to node 0. will want 1027 to show as belonging to node 1
- * example:
- * TOPOFMEM = 1024
- * 1024 >> 8 = 4 (subtract 1 for starting at 0]
- * tmpvar = TOPOFMEM - 256 = 768
- * 1024 >> 8 = 4 (subtract 1 for starting at 0]
- *
- */
-static void __init initialize_physnode_map(void)
-{
- int nid;
- unsigned int topofmem, cur;
- struct eachquadmem *eq;
- struct sys_cfg_data *scd =
- (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
-
-
- for(nid = 0; nid < numnodes; nid++) {
- if(scd->quads_present31_0 & (1 << nid)) {
- eq = &scd->eq[nid];
- cur = eq->hi_shrd_mem_start;
- topofmem = eq->hi_shrd_mem_start + eq->hi_shrd_mem_size;
- while (cur < topofmem) {
- physnode_map[cur >> 8] = nid;
- cur ++;
- }
- }
- }
-}
-
-void __init get_memcfg_numaq(void)
-{
- smp_dump_qct();
- initialize_physnode_map();
-}
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/mach-numaq/Makefile linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/Makefile
--- linux-2.5.64-vanilla/arch/i386/mach-numaq/Makefile Wed Dec 31 16:00:00 1969
+++ linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/Makefile Fri Mar 14 15:40:55 2003
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+EXTRA_CFLAGS += -I../kernel
+
+obj-y := setup.o topology.o numaq.o
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/mach-numaq/numaq.c linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/numaq.c
--- linux-2.5.64-vanilla/arch/i386/mach-numaq/numaq.c Wed Dec 31 16:00:00 1969
+++ linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/numaq.c Tue Mar 4 19:29:32 2003
@@ -0,0 +1,127 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <asm/numaq.h>
+
+/* These are needed before the pgdat's are created */
+unsigned long node_start_pfn[MAX_NUMNODES];
+unsigned long node_end_pfn[MAX_NUMNODES];
+
+#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
+
+/*
+ * Function: smp_dump_qct()
+ *
+ * Description: gets memory layout from the quad config table. This
+ * function also increments numnodes with the number of nodes (quads)
+ * present.
+ */
+static void __init smp_dump_qct(void)
+{
+ int node;
+ struct eachquadmem *eq;
+ struct sys_cfg_data *scd =
+ (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+ numnodes = 0;
+ for(node = 0; node < MAX_NUMNODES; node++) {
+ if(scd->quads_present31_0 & (1 << node)) {
+ node_set_online(node);
+ numnodes++;
+ eq = &scd->eq[node];
+ /* Convert to pages */
+ node_start_pfn[node] = MB_TO_PAGES(
+ eq->hi_shrd_mem_start - eq->priv_mem_size);
+ node_end_pfn[node] = MB_TO_PAGES(
+ eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
+ }
+ }
+}
+
+/*
+ * -----------------------------------------
+ *
+ * functions related to physnode_map
+ *
+ * -----------------------------------------
+ */
+/*
+ * physnode_map keeps track of the physical memory layout of the
+ * numaq nodes on a 256Mb break (each element of the array will
+ * represent 256Mb of memory and will be marked by the node id. so,
+ * if the first gig is on node 0, and the second gig is on node 1
+ * physnode_map will contain:
+ * physnode_map[0-3] = 0;
+ * physnode_map[4-7] = 1;
+ * physnode_map[8- ] = -1;
+ */
+int physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1};
+EXPORT_SYMBOL(physnode_map);
+
+/*
+ * for each node mark the regions
+ * TOPOFMEM = hi_shrd_mem_start + hi_shrd_mem_size
+ *
+ * need to be very careful to not mark 1024+ as belonging
+ * to node 0. will want 1027 to show as belonging to node 1
+ * example:
+ * TOPOFMEM = 1024
+ * 1024 >> 8 = 4 (subtract 1 for starting at 0]
+ * tmpvar = TOPOFMEM - 256 = 768
+ * 1024 >> 8 = 4 (subtract 1 for starting at 0]
+ *
+ */
+static void __init initialize_physnode_map(void)
+{
+ int nid;
+ unsigned int topofmem, cur;
+ struct eachquadmem *eq;
+ struct sys_cfg_data *scd =
+ (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+
+ for(nid = 0; nid < numnodes; nid++) {
+ if(scd->quads_present31_0 & (1 << nid)) {
+ eq = &scd->eq[nid];
+ cur = eq->hi_shrd_mem_start;
+ topofmem = eq->hi_shrd_mem_start + eq->hi_shrd_mem_size;
+ while (cur < topofmem) {
+ physnode_map[cur >> 8] = nid;
+ cur ++;
+ }
+ }
+ }
+}
+
+void __init get_memcfg_numaq(void)
+{
+ smp_dump_qct();
+ initialize_physnode_map();
+}
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/mach-numaq/setup.c linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/setup.c
--- linux-2.5.64-vanilla/arch/i386/mach-numaq/setup.c Wed Dec 31 16:00:00 1969
+++ linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/setup.c Fri Mar 14 15:42:17 2003
@@ -0,0 +1,104 @@
+/*
+ * Machine specific setup for generic
+ */
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/arch_hooks.h>
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+ init_ISA_irqs();
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL};
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ * Fill in any interrupts that may have been left out by the general
+ * init_IRQ() routine. interrupts having to do with the machine rather
+ * than the devices on the I/O bus (like APIC interrupts in intel MP
+ * systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ apic_intr_init();
+#endif
+
+ setup_irq(2, &irq2);
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ * generally used to activate any machine specific identification
+ * routines that may be needed before setup_arch() runs. On VISWS
+ * this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ * Called as the final act of trap_init(). Used in VISWS to initialise
+ * the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+}
+
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ * Must plug the system timer interrupt source at HZ into the IRQ listed
+ * in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+ setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ * The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ * along the MCA bus. Use this to hook into that chain if you will need
+ * it.
+ **/
+void __init mca_nmi_hook(void)
+{
+ /* If I recall correctly, there's a whole bunch of other things that
+ * we can do to check for NMI problems, but that's all I know about
+ * at the moment.
+ */
+
+ printk("NMI generated from unknown source!\n");
+}
+#endif
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/mach-numaq/topology.c linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/topology.c
--- linux-2.5.64-vanilla/arch/i386/mach-numaq/topology.c Wed Dec 31 16:00:00 1969
+++ linux-2.5.64-numaq_subarch/arch/i386/mach-numaq/topology.c Fri Mar 14 15:42:17 2003
@@ -0,0 +1,68 @@
+/*
+ * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/cpu.h>
+
+struct i386_cpu cpu_devices[NR_CPUS];
+
+#ifdef CONFIG_NUMA
+#include <linux/mmzone.h>
+#include <asm/node.h>
+#include <asm/memblk.h>
+
+struct i386_node node_devices[MAX_NUMNODES];
+struct i386_memblk memblk_devices[MAX_NR_MEMBLKS];
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < num_online_nodes(); i++)
+ arch_register_node(i);
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ for (i = 0; i < num_online_memblks(); i++)
+ arch_register_memblk(i);
+ return 0;
+}
+
+#else /* !CONFIG_NUMA */
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ return 0;
+}
+
+#endif /* CONFIG_NUMA */
+
+subsys_initcall(topology_init);
\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.063 / U:6.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site