lkml.org 
[lkml]   [2003]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [patch] Summit support for pcibus <-> cpumask topology [2/2]
James Bottomley wrote:
>> This patch adds a new file, arch/i386/kernel/summit.c, for
>> summit-specific code. Adds some structures to mach_mpparse.h. Also
>> adds a hook in setup_arch() to dig out the PCI info, and stores it in
>> the mp_bus_id_to_node[] array, where it can be read by the topology
>> functions.
>
>
> Wouldn't this file be better in arch/i386/mach-summit in keeping with
> all the other subarch stuff?
>
> While you're creating a separate file for summit, could you move the
> summit specific variables (mpparse.c:x86_summit is the only one, I
> think) into it so we can clean all the summit references out of the main
> line?
>
> Thanks,
>
> James

Ok... Split into two patches now. Patch 1 moves summit stuff into
subarch. Just creates the directory and populates it with setup.c,
topology.c, and the Makefile from mach-default. Also creates a summit.c
which only has the x86_summit variable you referred to.

Patch 2 adds all pcimapping code, but adds it in the subarch dir, not
i386/kernel/.

Cheers!

-Matt
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-summit_subarch/arch/i386/kernel/setup.c linux-2.5.64-summit_pcimap/arch/i386/kernel/setup.c
--- linux-2.5.64-summit_subarch/arch/i386/kernel/setup.c Tue Mar 4 19:29:18 2003
+++ linux-2.5.64-summit_pcimap/arch/i386/kernel/setup.c Fri Mar 14 09:56:21 2003
@@ -918,6 +918,9 @@
if (smp_found_config)
get_smp_config();
#endif
+#ifdef CONFIG_X86_SUMMIT
+ setup_summit();
+#endif

register_memory(max_low_pfn);

diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-summit_subarch/arch/i386/mach-summit/summit.c linux-2.5.64-summit_pcimap/arch/i386/mach-summit/summit.c
--- linux-2.5.64-summit_subarch/arch/i386/mach-summit/summit.c Fri Mar 14 17:32:48 2003
+++ linux-2.5.64-summit_pcimap/arch/i386/mach-summit/summit.c Fri Mar 14 17:09:02 2003
@@ -26,4 +26,139 @@
*
*/

+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <mach_mpparse.h>
+
int x86_summit = 0;
+
+static void __init setup_pci_node_map_for_wpeg(int wpeg_num, struct rio_table_hdr *rth,
+ struct scal_detail **scal_nodes, struct rio_detail **rio_nodes){
+ int twst_num = 0, node = 0, first_bus = 0;
+ int i, bus, num_busses;
+
+ for(i = 0; i < rth->num_rio_dev; i++){
+ if (rio_nodes[i]->node_id == rio_nodes[wpeg_num]->owner_id){
+ twst_num = rio_nodes[i]->owner_id;
+ break;
+ }
+ }
+ if (i == rth->num_rio_dev){
+ printk("%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
+ return;
+ }
+
+ for(i = 0; i < rth->num_scal_dev; i++){
+ if (scal_nodes[i]->node_id == twst_num){
+ node = scal_nodes[i]->node_id;
+ break;
+ }
+ }
+ if (i == rth->num_scal_dev){
+ printk("%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
+ return;
+ }
+
+ switch (rio_nodes[wpeg_num]->type){
+ case CompatWPEG:
+ /* The Compatability Winnipeg controls the legacy busses
+ (busses 0 & 1), the 66MHz PCI bus [2 slots] (bus 2),
+ and the "extra" busses in case a PCI-PCI bridge card is
+ used in either slot (busses 3 & 4): total 5 busses. */
+ num_busses = 5;
+ /* The BIOS numbers the busses starting at 1, and in a
+ slightly wierd manner. You'll have to trust that
+ the math used below to determine the number of the
+ first bus works. */
+ first_bus = (rio_nodes[wpeg_num]->first_slot - 1) * 2;
+ break;
+ case AltWPEG:
+ /* The Alternate/Secondary Winnipeg controls the 1st 133MHz
+ bus [1 slot] & its "extra" bus (busses 0 & 1), the 2nd
+ 133MHz bus [1 slot] & its "extra" bus (busses 2 & 3), the
+ 100MHz bus [2 slots] (bus 4), and the "extra" busses for
+ the 2 100MHz slots (busses 5 & 6): total 7 busses. */
+ num_busses = 7;
+ first_bus = (rio_nodes[wpeg_num]->first_slot * 2) - 1;
+ break;
+ case LookOutAWPEG:
+ case LookOutBWPEG:
+ printk("%s: LookOut Winnipegs not supported yet!\n", __FUNCTION__);
+ return;
+ default:
+ printk("%s: Unsupported Winnipeg type!\n", __FUNCTION__);
+ return;
+ }
+
+ for(bus = first_bus; bus < first_bus + num_busses; bus++)
+ mp_bus_id_to_node[bus] = node;
+}
+
+static void __init build_detail_arrays(struct rio_table_hdr *rth,
+ struct scal_detail **sd, struct rio_detail **rd){
+ unsigned long ptr;
+ int i, scal_detail_size, rio_detail_size;
+
+ switch (rth->version){
+ default:
+ printk("%s: Bad Rio Grande Table Version: %d\n", __FUNCTION__, rth->version);
+ /* Fall through to default to version 2 spec */
+ case 2:
+ scal_detail_size = 11;
+ rio_detail_size = 13;
+ break;
+ case 3:
+ scal_detail_size = 12;
+ rio_detail_size = 15;
+ break;
+ }
+
+ ptr = (unsigned long)rth + 3;
+ for(i = 0; i < rth->num_scal_dev; i++)
+ sd[i] = (struct scal_detail *)(ptr + (scal_detail_size * i));
+
+ ptr += scal_detail_size * rth->num_scal_dev;
+ for(i = 0; i < rth->num_rio_dev; i++)
+ rd[i] = (struct rio_detail *)(ptr + (rio_detail_size * i));
+}
+
+void __init setup_summit(void)
+{
+ struct rio_table_hdr *rio_table_hdr = NULL;
+ struct scal_detail *scal_devs[MAX_NUMNODES];
+ struct rio_detail *rio_devs[MAX_NUMNODES*2];
+ unsigned long ptr;
+ unsigned short offset;
+ int i;
+
+ memset(mp_bus_id_to_node, -1, sizeof(mp_bus_id_to_node));
+
+ /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
+ ptr = *(unsigned short *)phys_to_virt(0x40Eul);
+ ptr = (unsigned long)phys_to_virt(ptr << 4);
+
+ offset = 0x180;
+ while (offset){
+ /* The block id is stored in the 2nd word */
+ if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+ /* set the pointer past the offset & block id */
+ rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+ break;
+ }
+ /* The next offset is stored in the 1st word. 0 means no more */
+ offset = *((unsigned short *)(ptr + offset));
+ }
+ if (!rio_table_hdr){
+ printk("%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
+ return;
+ }
+
+ /* Deal with the ugly version 2/3 pointer arithmetic */
+ build_detail_arrays(rio_table_hdr, scal_devs, rio_devs);
+
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++)
+ if (is_WPEG(rio_devs[i]->type))
+ /* It's a Winnipeg, it's got PCI Busses */
+ setup_pci_node_map_for_wpeg(i, rio_table_hdr, scal_devs, rio_devs);
+}
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-summit_subarch/include/asm-i386/mach-summit/mach_mpparse.h linux-2.5.64-summit_pcimap/include/asm-i386/mach-summit/mach_mpparse.h
--- linux-2.5.64-summit_subarch/include/asm-i386/mach-summit/mach_mpparse.h Tue Mar 4 19:29:17 2003
+++ linux-2.5.64-summit_pcimap/include/asm-i386/mach-summit/mach_mpparse.h Fri Mar 14 12:20:38 2003
@@ -1,6 +1,8 @@
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H

+#include <mach_apic.h>
+
extern int use_cyclone;

static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
@@ -33,4 +35,71 @@
use_cyclone = 1; /*enable cyclone-timer*/
}
}
+
+struct rio_table_hdr {
+ unsigned char version; /* Version number of this data structure */
+ /* Version 3 adds chassis_num & WP_index */
+ unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
+ unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
+} __attribute__((packed));
+
+struct scal_detail {
+ unsigned char node_id; /* Scalability Node ID */
+ unsigned long CBAR; /* Address of 1MB register space */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port2node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
+} __attribute__((packed));
+
+struct rio_detail {
+ unsigned char node_id; /* RIO Node ID */
+ unsigned long BBAR; /* Address of 1MB register space */
+ unsigned char type; /* Type of device */
+ unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+ /* For CYC: Node ID of Twister that owns this CYC */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
+ /* For CYC: 0 */
+ unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
+ /* = 0 : the XAPIC is not used, ie:*/
+ /* ints fwded to another XAPIC */
+ /* Bits1:7 Reserved */
+ /* For CYC: Bits0:7 Reserved */
+ unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
+ /* lower slot numbers/PCI bus numbers */
+ /* For CYC: No meaning */
+ unsigned char chassis_num; /* 1 based Chassis number */
+ /* For LookOut WPEGs this field indicates the */
+ /* Expansion Chassis #, enumerated from Boot */
+ /* Node WPEG external port, then Boot Node CYC */
+ /* external port, then Next Vigil chassis WPEG */
+ /* external port, etc. */
+ /* Shared Lookouts have only 1 chassis number (the */
+ /* first one assigned) */
+} __attribute__((packed));
+
+
+typedef enum {
+ CompatTwister = 0, /* Compatibility Twister */
+ AltTwister = 1, /* Alternate Twister of internal 8-way */
+ CompatCyclone = 2, /* Compatibility Cyclone */
+ AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
+ CompatWPEG = 4, /* Compatibility WPEG */
+ AltWPEG = 5, /* Second Planar WPEG */
+ LookOutAWPEG = 6, /* LookOut WPEG */
+ LookOutBWPEG = 7, /* LookOut WPEG */
+} node_type;
+
+static inline int is_WPEG(node_type type){
+ return (type == CompatWPEG || type == AltWPEG ||
+ type == LookOutAWPEG || type == LookOutBWPEG);
+}
+
#endif /* __ASM_MACH_MPPARSE_H */
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-summit_subarch/include/asm-i386/mpspec.h linux-2.5.64-summit_pcimap/include/asm-i386/mpspec.h
--- linux-2.5.64-summit_subarch/include/asm-i386/mpspec.h Tue Mar 4 19:28:53 2003
+++ linux-2.5.64-summit_pcimap/include/asm-i386/mpspec.h Fri Mar 14 09:58:46 2003
@@ -222,6 +222,10 @@
extern int pic_mode;
extern int using_apic_timer;

+#ifdef CONFIG_X86_SUMMIT
+extern void setup_summit (void);
+#endif
+
#ifdef CONFIG_ACPI_BOOT
extern void mp_register_lapic (u8 id, u8 enabled);
extern void mp_register_lapic_address (u64 address);
\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.065 / U:8.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site