lkml.org 
[lkml]   [2003]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Problem with aacraid driver in 2.5.63-bk-latest
From
Date
On Thu, 2003-03-13 at 23:25, Doug Ledford wrote:
> Mark Haverkamp wrote:
> > Then it sounds like the aacraid driver could set cmd_per_lun to a small
> > number like one since the real queue depth will be set later in
> > aac_slave_configure.
>
> Yes. And since the driver doesn't support anything other than drives to
> my knowledge, 1 would be appropriate.

It supports both disks and non disk devices. Disks are mapped onto bus 0
and are driven via firmware smarts as logical devices, non disks are bus 1
and there it behaves mostly like a scsi controller

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.041 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site