lkml.org 
[lkml]   [2003]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Help, eth0: transmit timed out!
Date
Tried a different NIC, another 3c905c.

Yeah i know about the modules thing, i turned it off
in case that was the problem.

D
----- Original Message -----
From: "Denis Vlasenko" <vda@port.imtp.ilyichevsk.odessa.ua>
To: "David Shirley" <dave@cs.curtin.edu.au>; <linux-kernel@vger.kernel.org>
Sent: Wednesday, March 12, 2003 9:50 PM
Subject: Re: Help, eth0: transmit timed out!


> On 12 March 2003 15:54, David Shirley wrote:
> > Its strange we have another machine, exact same setup,
> > hardware/software and it doesn't have any problems.
>
> Did you try to swap some hardware? NIC would be the first
> to swap.
>
> > The other thing is that sometimes the machine freezes totally,
> > and othertimes it comes back after 30 secs??
>
> If it's a driver problem, anything is possible.
>
> > FYI: Its not a modular kernel, but ill try the printk thing.
>
> Modular one will be far easier (faster) to play with.
> You just unload the module, recompile and reload.
> No reboot cycles.
> --
> vda
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.031 / U:9.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site