lkml.org 
[lkml]   [2003]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Promise FastTrak TX4 losing interrupts (with apic mode)
Stephan,

> hde: lost interrupt
> hde: lost interrupt
> ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
> hde: lost interrupt
> unknown partition table
> hdg: lost interrupt
> hdg: lost interrupt
> ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
> hdg: lost interrupt
> unknown partition table
> hdi: lost interrupt
> hdi: lost interrupt
> ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
> hdi: lost interrupt
> unknown partition table

I just saw, and fixed, a very similar problem last night (lost interrupts,
but partition table was eventually read). The system was a dual Xeon on a
P4DP6. The Promise card was an Ultra100TX2. The OS was RedHat 7.3.

The fix was to increase the bus master time for the PCI slot in the BIOS.
This was also tried under SuSE 8.1, where it did NOT work.

YMMV.
Peter Ashford

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.053 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site