lkml.org 
[lkml]   [2003]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjecthdb=flash doesn't help
Date
Hello

We have a system with 2 CF-disks connected
directly to the IDE-controller (PIIX4). We
used before the "old" IDE-driver hd.c and it
worked fine, until we had to use a larger
disk (1.5GB). Then we disabled hd.c, and
appended hdb=flash. Then initially at boot
both drives are identified:
PIIX4: IDE controller...
PIIX4 chipset revision 1
PIIX4: not 100% native mode...
ide0: BM-DMA at...
hda: Hitachi...
hdb: ...
ide0 at...
hdb: 31488 sectors (16MB)...
Partition check:
hdb: hdb1
...
And that's it. hda never appears again. And
what is also strange, the order of hda/b is
swapped, compared to the old hd.c driver and
to BIOS settings. What's the reason for this
behaviour and how do we fix it?

Thanks
Guennadi
---
Guennadi Liakhovetski

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.043 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site