lkml.org 
[lkml]   [2003]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] s390 fixes (8/12).
Date
updates for unified netdev config

- remove duplicate questions from drivers/s390/Kconfig
- some trivial fixes to make the s390 specific options work
diff -urN linux-2.5.59/arch/s390/Kconfig linux-2.5.59-s390/arch/s390/Kconfig
--- linux-2.5.59/arch/s390/Kconfig Fri Jan 17 03:22:03 2003
+++ linux-2.5.59-s390/arch/s390/Kconfig Mon Feb 3 15:11:41 2003
@@ -268,6 +268,9 @@

endmenu

+config PCMCIA
+ bool
+ default n

menu "SCSI support"

diff -urN linux-2.5.59/arch/s390x/Kconfig linux-2.5.59-s390/arch/s390x/Kconfig
--- linux-2.5.59/arch/s390x/Kconfig Fri Jan 17 03:22:13 2003
+++ linux-2.5.59-s390/arch/s390x/Kconfig Mon Feb 3 15:11:41 2003
@@ -282,6 +282,9 @@

endmenu

+config PCMCIA
+ bool
+ default n

menu "SCSI support"

diff -urN linux-2.5.59/drivers/net/Kconfig
linux-2.5.59-s390/drivers/net/Kconfig
--- linux-2.5.59/drivers/net/Kconfig Fri Jan 17 03:22:40 2003
+++ linux-2.5.59-s390/drivers/net/Kconfig Mon Feb 3 15:11:41 2003
@@ -2561,3 +2561,5 @@
source "drivers/net/pcmcia/Kconfig"

source "drivers/atm/Kconfig"
+
+source "drivers/s390/net/Kconfig"
diff -urN linux-2.5.59/drivers/net/tokenring/Kconfig
linux-2.5.59-s390/drivers/net/tokenring/Kconfig
--- linux-2.5.59/drivers/net/tokenring/Kconfig Fri Jan 17 03:21:48 2003
+++ linux-2.5.59-s390/drivers/net/tokenring/Kconfig Mon Feb 3 15:11:41 2003
@@ -8,7 +8,7 @@
# So far, we only have PCI, ISA, and MCA token ring devices
config TR
bool "Token Ring driver support"
- depends on (PCI || ISA || MCA) && LLC=y
+ depends on (PCI || ISA || MCA || CCW) && LLC=y
help
Token Ring is IBM's way of communication on a local network; the
rest of the world uses Ethernet. To participate on a Token Ring
diff -urN linux-2.5.59/drivers/s390/Kconfig
linux-2.5.59-s390/drivers/s390/Kconfig
--- linux-2.5.59/drivers/s390/Kconfig Fri Jan 17 03:22:40 2003
+++ linux-2.5.59-s390/drivers/s390/Kconfig Mon Feb 3 15:11:41 2003
@@ -1,3 +1,7 @@
+config CCW
+ bool
+ default y
+

menu "Block device drivers"

@@ -317,186 +321,6 @@
endmenu


-menu "Network device drivers"
- depends on NET
-
-config NETDEVICES
- bool "Network device support"
- ---help---
- You can say N here if you don't intend to connect your Linux box to
- any other computer at all or if all your connections will be over a
- telephone line with a modem either via UUCP (UUCP is a protocol to
- forward mail and news between unix hosts over telephone lines; read
- the UUCP-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
- account or a BBS, even using term (term is a program which gives you
- almost full Internet connectivity if you have a regular dial up
- shell account on some Internet connected Unix computer. Read
- <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
- You'll have to say Y if your computer contains a network card that
- you want to use under Linux (make sure you know its name because you
- will be asked for it and read the Ethernet-HOWTO (especially if you
- plan to use more than one network card under Linux)) or if you want
- to use SLIP (Serial Line Internet Protocol is the protocol used to
- send Internet traffic over telephone lines or null modem cables) or
- CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
- and newer replacement for SLIP) or PLIP (Parallel Line Internet
- Protocol is mainly used to create a mini network by connecting the
- parallel ports of two local machines) or AX.25/KISS (protocol for
- sending Internet traffic over amateur radio links).
-
- Make sure to read the NET-3-HOWTO. Eventually, you will have to read
- Olaf Kirch's excellent and free book "Network Administrator's
- Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
- unsure, say Y.
-
-config DUMMY
- tristate "Dummy net driver support"
- depends on NETDEVICES
- ---help---
- This is essentially a bit-bucket device (i.e. traffic you send to
- this device is consigned into oblivion) with a configurable IP
- address. It is most commonly used in order to make your currently
- inactive SLIP address seem like a real address for local programs.
- If you use SLIP or PPP, you might want to say Y here. Since this
- thing often comes in handy, the default is Y. It won't enlarge your
- kernel either. What a deal. Read about it in the Network
- Administrator's Guide, available from
- <http://www.linuxdoc.org/docs.html#guide>.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called dummy.o. If you want to use more than one dummy
- device at a time, you need to compile this driver as a module.
- Instead of 'dummy', the devices will then be called 'dummy0',
- 'dummy1' etc.
-
-config BONDING
- tristate "Bonding driver support"
- depends on NETDEVICES
- ---help---
- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
- Channels together. This is called 'Etherchannel' by Cisco,
- 'Trunking' by Sun, and 'Bonding' in Linux.
-
- If you have two Ethernet connections to some other computer, you can
- make them behave like one double speed connection using this driver.
- Naturally, this has to be supported at the other end as well, either
- with a similar Bonding Linux driver, a Cisco 5500 switch or a
- SunTrunking SunSoft driver.
-
- This is similar to the EQL driver, but it merges Ethernet segments
- instead of serial lines.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called bonding.o.
-
-config EQUALIZER
- tristate "EQL (serial line load balancing) support"
- depends on NETDEVICES
- ---help---
- If you have two serial connections to some other computer (this
- usually requires two modems and two telephone lines) and you use
- SLIP (the protocol for sending Internet traffic over telephone
- lines) or PPP (a better SLIP) on them, you can make them behave like
- one double speed connection using this driver. Naturally, this has
- to be supported at the other end as well, either with a similar EQL
- Linux driver or with a Livingston Portmaster 2e.
-
- Say Y if you want this and read
- <file:Documentation/networking/eql.txt>. You may also want to read
- section 6.2 of the NET-3-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called eql.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>. If
- unsure, say N.
-
-config TUN
- tristate "Universal TUN/TAP device driver support"
- depends on NETDEVICES
- ---help---
- TUN/TAP provides packet reception and transmission for user space
- programs. It can be viewed as a simple Point-to-Point or Ethernet
- device, which instead of receiving packets from a physical media,
- receives them from user space program and instead of sending packets
- via physical media writes them to the user space program.
-
- When a program opens /dev/net/tun, driver creates and registers
- corresponding net device tunX or tapX. After a program closed above
- devices, driver will automatically delete tunXX or tapXX device and
- all routes corresponding to it.
-
- Please read <file:Documentation/networking/tuntap.txt> for more
- information.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called tun.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
-
- If you don't know what to use this for, you don't need it.
-
-config NET_ETHERNET
- bool "Ethernet (10 or 100Mbit)"
- depends on NETDEVICES
- ---help---
- Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
- type of Local Area Network (LAN) in universities and companies.
-
- Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
- coaxial cable, linking computers in a chain), 10BASE-T or twisted
- pair (10 Mbps over twisted pair cable, linking computers to central
- hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
- 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
- 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
- cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
- [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
- Ethernet (1 Gbps over optical fiber or short copper links).
-
- If your Linux machine will be connected to an Ethernet and you have
- an Ethernet network interface card (NIC) installed in your computer,
- say Y here and read the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>. You will then also have
- to say Y to the driver for your particular NIC.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Ethernet network cards. If unsure, say N.
-
-config TR
- bool "Token Ring driver support"
- depends on NETDEVICES
- help
- Token Ring is IBM's way of communication on a local network; the
- rest of the world uses Ethernet. To participate on a Token Ring
- network, you need a special Token ring network card. If you are
- connected to such a Token Ring network and want to use your Token
- Ring card under Linux, say Y here and to the driver for your
- particular card below and read the Token-Ring mini-HOWTO, available
- from <http://www.linuxdoc.org/docs.html#howto>. Most people can
- say N here.
-
-config FDDI
- bool "FDDI driver support"
- depends on NETDEVICES
- help
- Fiber Distributed Data Interface is a high speed local area network
- design; essentially a replacement for high speed Ethernet. FDDI can
- run over copper or fiber. If you are connected to such a network and
- want a driver for the FDDI card in your computer, say Y here (and
- then also Y to the driver for your FDDI card, below). Most people
- will say N.
-
-comment "S/390 network device drivers"
- depends on NETDEVICES
-
config HOTPLUG
bool
default y
@@ -516,39 +340,4 @@
agent" (/sbin/hotplug) to load modules and set up software needed
to use devices as you hotplug them.

-config LCS
- tristate "Lan Channel Station Interface"
- depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
- help
- Select this option if you want to use LCS networking on IBM S/390
- or zSeries. This device driver supports Token Ring (IEEE 802.5),
- FDDI (IEEE 802.7) and Ethernet.
- This option is also available as a module which will be
- called lcs.o . If you do not know what it is, it's safe to say "Y".
-
-config CTC
- tristate "CTC device support"
- depends on NETDEVICES
- help
- Select this option if you want to use channel-to-channel networking
- on IBM S/390 or zSeries. This device driver supports real CTC
- coupling using ESCON. It also supports virtual CTCs when running
- under VM. It will use the channel device configuration if this is
- available. This option is also available as a module which will be
- called ctc.o. If you do not know what it is, it's safe to say "Y".
-
-config IUCV
- tristate "IUCV device support (VM only)"
- depends on NETDEVICES
- help
- Select this option if you want to use inter-user communication
- vehicle networking under VM or VIF. This option is also available
- as a module which will be called iucv.o. If unsure, say "Y".
-
-config CCWGROUP
- tristate
- depends on LCS || CTC
- default m if LCS!=y && CTC!=y
- default y if LCS=y || CTC=y
-endmenu

diff -urN linux-2.5.59/drivers/s390/net/Kconfig
linux-2.5.59-s390/drivers/s390/net/Kconfig
--- linux-2.5.59/drivers/s390/net/Kconfig Thu Jan 1 01:00:00 1970
+++ linux-2.5.59-s390/drivers/s390/net/Kconfig Mon Feb 3 15:11:41 2003
@@ -0,0 +1,38 @@
+menu "S/390 network device drivers"
+ depends on NETDEVICES && ARCH_S390
+
+config LCS
+ tristate "Lan Channel Station Interface"
+ depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
+ help
+ Select this option if you want to use LCS networking on IBM S/390
+ or zSeries. This device driver supports Token Ring (IEEE 802.5),
+ FDDI (IEEE 802.7) and Ethernet.
+ This option is also available as a module which will be
+ called lcs.o . If you do not know what it is, it's safe to say "Y".
+
+config CTC
+ tristate "CTC device support"
+ depends on NETDEVICES
+ help
+ Select this option if you want to use channel-to-channel networking
+ on IBM S/390 or zSeries. This device driver supports real CTC
+ coupling using ESCON. It also supports virtual CTCs when running
+ under VM. It will use the channel device configuration if this is
+ available. This option is also available as a module which will be
+ called ctc.o. If you do not know what it is, it's safe to say "Y".
+
+config IUCV
+ tristate "IUCV device support (VM only)"
+ depends on NETDEVICES
+ help
+ Select this option if you want to use inter-user communication
+ vehicle networking under VM or VIF. This option is also available
+ as a module which will be called iucv.o. If unsure, say "Y".
+
+config CCWGROUP
+ tristate
+ depends on LCS || CTC
+ default m if LCS!=y && CTC!=y
+ default y if LCS=y || CTC=y
+endmenu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.032 / U:6.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site